NEMO NM-ATMOS-1P

NEMO Atom OSMO 1P Mesh Tent NM-ATMOS-1P-MB Instruction Manual

Model: NM-ATMOS-1P-MB

Введение

Thank you for choosing the NEMO Atom OSMO 1P Mesh Tent. This manual provides essential information for the safe and effective use of your tent. The Atom OSMO 1P is a lightweight, single-person tent designed for backpacking and camping, featuring durable OSMO fabric, a spacious interior, and a functional vestibule. Please read these instructions thoroughly before your first use and retain them for future reference.

Информация по безопасности

  • Пожарная безопасность: Keep all flame and heat sources away from tent fabric. The tent is not fireproof.
  • Вентиляция: Ensure adequate ventilation to prevent condensation and carbon monoxide buildup if using heating or cooking devices (not recommended inside the tent).
  • Погодные условия: While designed for durability, extreme weather conditions (high winds, heavy snow, severe thunderstorms) can damage the tent and pose risks. Seek appropriate shelter if conditions worsen.
  • Выбор места: Choose a level, clear site away from potential hazards like falling rocks, dead trees, or flood-prone areas.

Содержимое упаковки

Verify that all components are present before your trip:

  • Tent Body (Inner Tent)
  • Rainfly
  • Tent Poles (Main pole assembly)
  • Tent Stakes/Pegs (Typically 8-10)
  • Guy-out Cords (Pre-attached or separate)
  • Repair Kit (Fabric patches, pole sleeve)
  • Stuff Sack for Tent
  • Stuff Sack for Poles and Stakes
Packed NEMO Atom OSMO 1P tent and pole bag

Image: The NEMO Atom OSMO 1P tent packed in its stuff sack alongside the separate pole and stake bag.

Инструкции по установке

  1. Подготовка места: Clear the chosen area of sharp objects, rocks, and debris. Lay out the tent footprint (if using) or the tent body directly.
  2. Сборка столбов: Connect the tent pole sections. The Atom OSMO 1P typically uses a single hubbed pole system for quick setup.
  3. Attach Tent Body: Lay the tent body flat. Insert the pole ends into the grommets or sleeves at the corners of the tent. Clip the tent body to the pole structure.
  4. Stake Out Tent Body: Secure the four main corners of the tent body with stakes. Pull the corners taut for a firm base.
  5. Тент-навес Drape Rainfly: Place the rainfly over the tent body, aligning the vestibule door with the inner tent door. Ensure the NEMO logo on the fly is facing the correct direction.
  6. Прикрепить Rainfly: Secure the rainfly to the tent poles or tent body corners using the buckles or clips provided.
  7. Stake Out Vestibule and Guy-lines: Stake out the vestibule door(s) to create usable space. Extend and stake out all guy-lines for maximum stability and wind resistance. Adjust tension as needed.
NEMO Atom OSMO 1P tent fully set up

Image: The NEMO Atom OSMO 1P tent fully pitched, showing its structure and rainfly.

NEMO Atom OSMO 1P tent vestibule with shoes

Image: A close-up of the tent's vestibule area, demonstrating space for gear like shoes.

Инструкция по эксплуатации

Вход и выход

The tent features a single side entry. Unzip the vestibule door, then unzip the inner tent door to enter or exit. Always close zippers completely to prevent insects and moisture from entering.

Вентиляция

Proper ventilation is crucial to minimize condensation. The Atom OSMO 1P includes mesh panels and adjustable vents.

  • Inner Tent Mesh: The inner tent is largely mesh, providing excellent airflow.
  • Rainfly Vents: The rainfly features vents that can be propped open to allow air circulation while keeping rain out. Adjust these based on weather conditions.
Интерьер view of tent vent

Изображение: интерьер view showing the upper mesh and zipper of the tent, indicating ventilation points.

Интерьер view of tent upper mesh and ventilation

Image: A detailed interior shot highlighting the upper mesh and ventilation design of the tent.

Экстерьер view of tent vent

Изображение: Экстерьер view of the tent's rainfly vent, designed to allow airflow.

Внутреннее пространство

The tent offers ample space for a single occupant and a sleeping pad. Internal pockets are provided for small item storage.

Interior of NEMO Atom OSMO 1P tent with sleeping pad

Image: The interior of the tent showing a sleeping pad, illustrating the available space for a single person.

Разборка и упаковка

  1. Remove Stakes and Guy-lines: Unstake all guy-lines and tent corners.
  2. Remove Rainfly: Detach the rainfly from the tent body and poles. Fold or roll it neatly.
  3. Disassemble Poles: Carefully remove the tent poles from the grommets/sleeves and collapse them. Store them in their dedicated stuff sack.
  4. Collapse Tent Body: Unclip the tent body from the poles. Lay the tent body flat and fold or roll it to fit into its stuff sack.
  5. Pack All Components: Ensure all components are dry and clean before packing. Place the tent body, rainfly, poles, and stakes into their respective stuff sacks.
NEMO Atom OSMO 1P tent packed in its stuff sack

Image: The NEMO Atom OSMO 1P tent neatly packed into its stuff sack, ready for transport.

Техническое обслуживание и уход

  • Уборка: Clean the tent with a sponge and mild, non-detergent soap. Do not machine wash or dry clean. Rinse thoroughly.
  • Сушка: Always ensure the tent is completely dry before packing and storing to prevent mildew and fabric degradation. Hang it in a shaded, well-ventilated area.
  • Хранилище: Store the tent loosely in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid compressing it tightly for long periods.
  • Ремонт: Use the included repair kit for minor tears. For significant damage, contact NEMO customer service or a professional repair service.

Поиск неисправностей

ПроблемаВозможная причинаРешение
Конденсация внутри палаткиLack of ventilation, high humidity, temperature difference.Increase ventilation by opening vents and doors (if weather permits). Choose a well-drained campсайт.
Палатка неустойчива на ветру.Improper staking, loose guy-lines, insufficient tension.Ensure all stakes are firmly in the ground. Tighten all guy-lines. Orient the tent with the narrowest end facing the wind.
Утечка водыDamaged fabric, seam sealant failure, improper rainfly setup.Check for tears and repair with the patch kit. Reapply seam sealant if necessary. Ensure rainfly is taut and properly positioned.
Заедание молнииDirt, debris, or fabric caught in zipper.Clean zipper teeth. Gently pull fabric away from the zipper path. Apply a zipper lubricant if needed.

Технические характеристики

  • Модель: NM-ATMOS-1P-MB
  • Емкость: 1 человек
  • Минимальный вес: 1.35 кг (2 фунтов 15 унций)
  • Вес в упаковке: (Not explicitly stated, but usually slightly higher than minimum)
  • Floor Dimensions: 210 см (длина) х 90 см (ширина)
  • Interior Peak Height: 105 см
  • Размер в упаковке: Approximately 43 cm length (based on review изображение)
  • Ткань: OSMO (Nylon, Polyester blend)
  • Рекомендуемое применение: Camping, Hiking, Trekking, Backpacking, Travel, Mountain Climbing

Гарантия и поддержка

NEMO products are designed for durability and performance. For specific warranty details, product support, or to inquire about repairs, please visit the official NEMO webили обратитесь в службу поддержки напрямую. Сохраните чек о покупке для предъявления гарантийных претензий.

Visit NEMO Equipment Official Webсайт

Связанные документы - NM-ATMOS-1P

Предварительноview Руководство по установке светодиодной панели NEMO PLN-066-400-4K-IP65
Инструкция по установке и технические характеристики светодиодной панели NEMO PLN-066-400-4K-IP65, включая подробную информацию о монтаже, электрических соединениях и характеристиках изделия.
Предварительноview NEMO TITIA & TITIA MINOR LED Luminaire Assembly and Installation Guide
Detailed assembly and installation instructions for the NEMO TITIA and TITIA MINOR LED luminaires, including box contents, step-by-step assembly, electrical connections, safety warnings, and cleaning procedures.
Предварительноview НЕМО ФОКС Этаж Lamp Инструкции по сборке и уходу
Официальная инструкция по сборке, установке и уходу за полом NEMO FOX lamp Дизайн: Бернхард Осанн. Включает описание продукта, предупреждения о безопасности и информацию об утилизации WEEE.
Предварительноview NEMO AS41C/AS41Z: Инструменты Montaggio e Installazione
Guida dettagliata per il montaggio e l'installazione delle lampАде NEMO AS41C и AS41Z. Включите istruzioni passo-passo, avvertenze di sicurezza e dettagВам предоставляется гарантия на правильную и безопасную установку.
Предварительноview NEMO UNTITLED Table LampСборка, эксплуатация и технические характеристики:
Comprehensive guide for the NEMO UNTITLED table lamp by Bernhard Osann, covering assembly instructions, installation options (base, wall, desk clamp), operation, maintenance, technical specifications, and WEEE compliance information.
Предварительноview Инструкция по сборке и руководство пользователя светодиодного светильника NEMO FOX LED Terra
Подробная инструкция по сборке, установке и использованию NEMO FOX LED Terra lampРазработано Бернхардом Озанном. Включает содержимое коробки, технические характеристики и предупреждения по технике безопасности.