1. Введение
This manual provides detailed instructions for the assembly, operation, and maintenance of your CADA C61081W Mobile Heavy Duty Crane. Please read this manual thoroughly before beginning assembly or operation to ensure proper use and to maximize the product's lifespan. This model is a complex building block set designed for enthusiasts, featuring motorized functions and remote control capabilities.
2. Информация по технике безопасности
ВНИМАНИЕ: ОПАСНОСТЬ УДУШЬЯ – мелкие детали. Не для детей младше 3 лет.
- Keep all small parts out of reach of young children.
- Ensure all electrical components (motors, battery box, remote control) are handled carefully and kept dry.
- Do not attempt to modify the product or its components, as this may lead to malfunction or injury.
- Use only recommended batteries for the remote control and power functions.
- The material is Acrylonitrile Butadiene Styrene (ABS) and is non-toxic.
3. Содержимое упаковки
Verify that all components are present before starting assembly. The CADA C61081W set includes approximately 1831 pieces, along with motors and a remote control unit.
Рисунок 3.1: Надview of the CADA C61081W set, showing the assembled crane, its packaging, remote control, and various motor components.
- Building blocks (approx. 1831 pieces)
- Motors for various functions
- Блок дистанционного управления
- Battery box (for motors)
- USB charging cable (for battery box)
- Инструкция по эксплуатации (данный документ)
4. Настройка и сборка
Follow the included step-by-step building instructions carefully. Assembly typically involves:
- Конструкция шасси: Begin by assembling the main chassis of the crane truck.
- Cabin and Outriggers: Construct the driver's cabin and the extendable outriggers for stability.
- Crane Boom Assembly: Build the multi-section crane boom, incorporating the necessary gears and mechanisms for lifting and extension.
- Motor and Wiring Installation: Integrate the motors into the designated positions as per the building guide. Carefully route and connect the wiring to the battery box.
- Powering the Battery Box: Ensure the battery box is charged using the provided USB cable.
- Сопряжение дистанционного управления: Turn on the battery box and the remote control. They should automatically pair. Refer to the remote control section for detailed pairing instructions if needed.
Рисунок 4.1: The fully assembled CADA C61081W crane, ready for operation with the remote control.
5. Инструкция по эксплуатации
The CADA C61081W crane is operated using the included remote control. Familiarize yourself with the remote control layout and functions.
5.1 Функции дистанционного управления
Рисунок 5.1: Remote control layout with labeled functions: Power switch, Feature switch, Driving controls, and Steering controls. It also shows the manual feature control toggle and RC feature control switch.
- Выключатель: Включает/выключает пульт дистанционного управления.
- Feature Switch: Toggles between different crane functions (e.g., boom lift, boom extension, winch).
- Управление автомобилем: Used to move the crane truck forward and backward.
- Steering Controls: Used to steer the crane truck left and right.
- Manual Feature Control Toggle: A physical switch on the crane itself to enable/disable remote control of certain features.
- RC Feature Control Switch: A switch on the remote control to activate specific motorized functions.
5.2 Crane Operations
5.2.1 Рулевое управление
The crane truck features steering knobs for precise control. Use the steering controls on the remote to maneuver the vehicle.
Рисунок 5.2: Detail of the steering knobs on the crane truck, indicating rotational movement for steering.
5.2.2 Boom Lift Control (50° Range)
To raise or lower the crane boom, activate the appropriate feature on the remote control and use the designated controls. The boom has a lift range of approximately 50 degrees.
Рисунок 5.3: Illustration of the boom lift control, showing the toggle B switch and spear wheel for adjusting the boom angle up to 50 degrees.
5.2.3 Boom Extension Control (34 cm)
Extend or retract the crane boom using the remote control. The boom can extend by approximately 34 cm.
Рисунок 5.4: Illustration of the boom extension control, detailing the toggle B switch and spear wheel for extending the boom by 34 cm.
Note: Specific controls for winch operation (hook up/down) are typically integrated with the feature switch. Refer to the detailed building instructions for precise control mapping.
6. Техническое обслуживание
- Уборка: Use a soft, dry cloth to clean the model. Avoid water or harsh chemicals.
- Хранилище: Храните модель в прохладном, сухом месте, вдали от прямых солнечных лучей, чтобы предотвратить разрушение материала.
- Уход батареи: If not in use for an extended period, remove batteries from the remote control and ensure the battery box is fully charged before storage.
- Проверка компонентов: Periodically inspect all connections and gears for wear or damage. Replace any broken parts promptly.
7. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Кран не реагирует на дистанционное управление. |
|
|
| Motor functions are weak or slow. |
|
|
| Parts are loose or falling off. |
|
|
8. Технические характеристики
- Номер модели: C61081W
- Бренд: КАДА
- Материал: Акрилонитрилбутадиенстирол (АБС)
- Количество штук: Около 1831
- Контроль: Пульт дистанционного управления (2.4 ГГц)
- Источник питания: Rechargeable battery box (for motors), standard batteries (for remote control, not included)
- Особые характеристики: Motorized boom lift (50°), motorized boom extension (34 cm), steering, driving. Non-toxic materials.
9. Гарантия и поддержка
For warranty information, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or replacement parts, please contact CADA customer service through their official channels. You may find additional resources and product information on the manufacturer's webсайт.
For more information, you may visit: CADA Official Webсайт
