Введение
The FMS Piper PA-18 Super Cub is a high-performance, ready-to-fly (RTF) remote control airplane designed for both beginners and experienced pilots. This 1300MM (52") model features advanced capabilities such as the Reflex V2 stabilization system, preinstalled navigation and landing lights, and robust construction for versatile operation. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure a safe and enjoyable flying experience.
Подробный view of the FMS Piper PA-18 Super Cub RC airplane, showcasing its white and grey livery with black accents and large wheels.
An informational graphic describing the 1300MM Piper PA-18 Super Cub as a two-seat, single-engine monoplane, with over 9,000 built and commonly used for bush flying, banner towing, and glider towing.
Что входит в коробку
Your FMS Piper PA-18 Super Cub RTF package includes the following components:
- Pre-assembled Piper PA-18 Super Cub Airframe (wings, fuselage, tail)
- Передатчик (пульт дистанционного управления)
- Receiver (Pre-installed)
- 1 литий-полимерный аккумулятор
- Зарядное устройство для аккумулятора
- Preinstalled Navigation and Landing Lights
- Oversized Pneumatic Rubber Tires
- CNC Metal Landing Gear Structure
- Руководство по продукту (этот документ)
Накладные расходы view showing the disassembled components of the FMS Piper PA-18 Super Cub, including the fuselage, wings, tail sections, landing gear, and various small parts, ready for assembly.
Настройка и сборка
The FMS Piper PA-18 Super Cub is designed for screw-together assembly, making setup straightforward. Follow these steps to prepare your aircraft for flight.
1. Установка крыла
Carefully slide the main wings onto the fuselage. Secure them using the provided screws. Ensure all connections are firm.
2. Tail Section Assembly
Attach the horizontal and vertical stabilizers to the rear of the fuselage. Connect any control linkages as per the diagrams in the physical manual.
3. Landing Gear Attachment
The CNC metal landing gear structure is designed for durability. Attach the landing gear to the designated points on the fuselage. The oversized pneumatic rubber tires are pre-installed on the landing gear.
A close-up image highlighting the large 120mm pneumatic rubber tire, emphasizing its size and suitability for all-terrain operations.
4. Зарядка и установка аккумулятора
Before first use, fully charge the included Lithium Polymer battery using the provided charger. Refer to the charger's instructions for safe charging practices. Once charged, install the battery securely in the aircraft's battery compartment.
5. Настройка передатчика
Ensure the transmitter has fresh batteries. Power on the transmitter before powering on the aircraft. Bind the transmitter to the receiver if not already bound (refer to the physical manual for binding instructions).
Инструкция по эксплуатации
The Piper PA-18 Super Cub is equipped with the Reflex V2 stabilization system and other features for enhanced flight control.
Предполетные проверки
- Убедитесь, что все управляющие поверхности (элероны, руль высоты, руль направления) перемещаются свободно и в правильном направлении относительно управляющих воздействий ручки управления.
- Проверьте уровень заряда батарей как в летательном аппарате, так и в передатчике.
- Убедитесь, что пропеллер надежно закреплен и не имеет повреждений.
- Confirm navigation and landing lights are functional.
Flight Modes (Reflex V2)
The Reflex V2 system offers different flight modes (e.g., Stabilizer, Dynamic, Off) to assist pilots. Consult the physical manual for detailed instructions on switching between modes and their specific characteristics.
Снимать
Choose an open, clear area for takeoff. Advance throttle smoothly and apply slight up-elevator as the aircraft gains speed.
The FMS Piper PA-18 Super Cub RC airplane soaring through a clear blue sky, demonstrating its flight capabilities.
Управление полетом
Use the transmitter sticks to control the aircraft. The Reflex V2 system will provide stability, especially in windy conditions.
Reverse Propeller Function
This model features a propeller that can be operated in reverse, offering more flexible and versatile control, particularly useful for short landings or ground maneuvering.
An illustration showing the FMS Piper PA-18 Super Cub with arrows indicating the forward and reverse rotation of the propeller, highlighting the 40A ESC (Electronic Speed Controller) that enables this feature.
Посадка
Approach the landing strip at a controlled speed. Reduce throttle and gently flare the aircraft just before touchdown. The oversized tires are designed to handle various terrains.
Обслуживание
Regular maintenance ensures the longevity and performance of your RC airplane.
- Уборка: After each flight, wipe down the airframe to remove dirt and debris.
- Проверка гребного винта: Check the propeller for any nicks, cracks, or damage. Replace if necessary.
- Control Surface Check: Ensure all hinges and linkages are free-moving and secure.
- Уход за аккумулятором: Store LiPo batteries in a cool, dry place at storage voltage. Не допускайте перезарядки или чрезмерной разрядки.
- Motor and ESC: Periodically check for any signs of wear or overheating.
- Шасси: Inspect the CNC metal landing gear for any bends or damage, especially after rough landings.
Поиск неисправностей
This section addresses common issues you might encounter during the operation of your FMS Piper PA-18 Super Cub.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Самолёт не отвечает на сигнал передатчика. | Battery low/dead, Transmitter not bound, Incorrect power-on sequence. | Charge/replace batteries. Re-bind transmitter and receiver. Power on transmitter first, then aircraft. |
| Aircraft crashes or flies erratically. | Reflex V2 settings incorrect, Control surfaces reversed, Mechanical issue. | Check Reflex V2 mode. Verify control surface direction. Inspect linkages and hinges. |
| Charger gets hot or smokes. | Faulty charger, Incorrect battery connection. | Immediately disconnect. Do not use. Contact FMS support for replacement. |
| Короткое время полета. | Battery not fully charged, Battery degradation. | Убедитесь, что батарея полностью заряжена. Рассмотрите возможность замены старых батарей. |
Технические характеристики
Detailed technical specifications for the FMS Piper PA-18 Super Cub 1300MM RC Airplane.
A visual representation of the product specifications, including wingspan, overall length, flying weight, motor size, ESC, servo, radio channels, recommended battery, aileron, retracts, flaps, approximate flying duration, experience level, assembly time, wing load, and wing area.
| Особенность | Деталь |
|---|---|
| Размах крыльев | 1300 мм / 51.2 дюйма |
| Общая длина | 986 мм / 38.8 дюйма |
| Летающий вес | Около 1450 г |
| Размер двигателя | 3536-KV850 |
| ЕСК | 40А |
| Сервопривод | 9г*6 |
| Радио | 6-канальный канал |
| Рекомендуемая батарея | 11.1V 2200mAh 25C |
| Элерон | Да |
| Отступает | Нет |
| Закрылки | Да |
| Approx. Flying Duration | 5 минуты |
| Уровень опыта | Средний |
| Время сборки | 10 минуты |
| Нагрузка на крыло | 48 г / дм² (0.096 унций / дюйм²) |
| Область крыла | 30 дм² (464.7 кв. Дюйма) |
Гарантия и поддержка
FMS is committed to providing quality products. For warranty claims, technical support, or replacement parts, please contact FMS customer service. Keep your proof of purchase.
- Повреждено во время транспортировки: If your package was damaged, retain all packing material and contact FMS immediately with photos of the damaged product and box.
- Incorrect Product Received: Keep all packing material and original boxes. FMS will arrange return shipping for the incorrect item and ship the correct one once the new, unused product is returned.
- Общие вопросы: For any other questions or concerns, refer to the FMS official store on Amazon или свяжитесь с их службой поддержки.
