Введение
The TOA SR-S4S is a high-performance, two-way line array speaker system designed for short-distance sound transmission. Its unique design allows for precise sound projection and consistent audio levels across various distances. This manual provides essential information for the proper setup, operation, and maintenance of your SR-S4S speaker system.
Информация по безопасности
Всегда соблюдайте следующие меры предосторожности, чтобы предотвратить травмы и повреждение оборудования:
- Источник питания: Ensure the speaker is connected to a power source that matches its voltagэлектронные требования.
- Вентиляция: Не закрывайте вентиляционные отверстия. Обеспечьте достаточную циркуляцию воздуха вокруг устройства, чтобы предотвратить перегрев.
- Влага: Keep the speaker away from water or excessive moisture. This product is not waterproof.
- Монтаж: When mounting, ensure the structure can support the speaker's weight (approximately 16 kg / 42.8 pounds). Use appropriate mounting hardware and follow all local building codes.
- Обслуживание: Не пытайтесь ремонтировать этот продукт самостоятельно. Поручите все обслуживание квалифицированному обслуживающему персоналу.
Продукт болееview
The SR-S4S speaker system is engineered for optimal sound distribution, featuring a robust design and advanced acoustic components.
Изображение: Спереди view of the TOA SR-S4S Short Throw 2-Way Line Array Speaker System. The speaker is a tall, slender, rectangular unit with a perforated metal grille covering the front face. The enclosure is light gray, and visible bolts secure the side panels. The TOA logo is subtly visible near the bottom of the grille.
Основные характеристики:
- Equipped with eight 10cm woofers for powerful low-frequency output.
- Features 24 small tweeters for clear high-frequency sound reproduction.
- Linear sound source effect minimizes energy attenuation over distance, enhancing long-distance sound projection.
- Suppressed vertical sound dispersion directs sound precisely to the target area.
- Maintains consistent sound pressure levels, preventing excessive loudness near the speaker.
- Allows for configuration of longer sound sources by joining 2 or 3 speakers, increasing projection distance and volume.
- Includes a built-in network circuit for single amplifier drive.
- Can be converted to a bi-amplifier drive system by modifying internal connections.
- Supports high-impedance applications with the optional MT-S0601 Matching Transformer.
Настраивать
Follow these steps for the initial setup of your SR-S4S speaker system:
- Распаковка: Carefully remove the speaker from its packaging. Inspect for any signs of damage during transit.
- Размещение: Position the speaker in the desired location. Ensure it is on a stable, level surface or securely mounted according to professional installation guidelines. Consider the speaker's directivity angle (90° Horizontal / 10° Vertical) for optimal sound coverage.
- Связь: Подключите динамик к вашему amplifier using appropriate speaker cables. The SR-S4S features M5 screw terminals and Neutrik NL4MP x2 input connectors. Ensure correct polarity (+ to + and - to -).
- Дополнительный би-Amping: If using a bi-amplifier drive system, refer to the detailed wiring diagram in the advanced setup guide (not included in this manual) for internal connection changes.
- Optional Matching Transformer: For high-impedance applications, install the optional MT-S0601 Matching Transformer as per its instructions.
- Включение питания: После того, как все соединения будут надежно закреплены, включите питание. amplifier and audio source. Start with the volume at its lowest setting.
Операционная
Operating the SR-S4S is straightforward once properly set up:
- Регулятор громкости: Отрегулируйте уровень громкости с помощью amplifier's controls. Avoid setting the volume too high, which can cause distortion or damage to the speaker.
- Оптимизация звука: For optimal sound quality, consider using a digital processor like the DP-0206 (optional) to fine-tune the frequency response.
- Системная интеграция: The SR-S4S is designed to integrate seamlessly into various audio setups, from small venues to larger installations requiring precise sound projection.
Обслуживание
Regular maintenance ensures the longevity and performance of your SR-S4S speaker system:
- Уборка: Use a soft, dry cloth to wipe down the exterior of the speaker. Do not use abrasive cleaners, solvents, or excessive moisture.
- Инспекция: Periodically check all cable connections for tightness and signs of wear. Ensure mounting hardware remains secure.
- Хранилище: If storing the speaker for an extended period, keep it in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.
Поиск неисправностей
If you encounter issues with your SR-S4S speaker, refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Нет звука | Ослабленные или неправильные кабельные соединения Ampлайфер не включен Неправильный выбор ввода на ampпожизненнее | Проверьте все динамики и ampболее жизненные связи. Гарантировать ampустройство включено и функционирует. Убедитесь, что выбран правильный источник входного сигнала. ampпожизненнее. |
| Искаженный звук | Слишком высокая громкость Поврежденный кабель динамика Ampклиппинг | Уменьшите уровень громкости. Осмотрите кабели динамиков на наличие повреждений; при необходимости замените их. Проверять amplifier's output level and ensure it's not overdriven. |
| Прерывистый звук | Ослабленное соединение Неисправный кабель | Обеспечьте безопасность всех соединений. Try a different speaker cable to isolate the issue. |
If the problem persists after attempting these solutions, contact TOA customer support or a qualified service technician.
Технические характеристики
| Особенность | Деталь |
|---|---|
| Тип корпуса | Бас-рефлекторный тип |
| Мощность мощность | Continuous program 600W |
| Номинальное сопротивление | 8 Ом |
| Чувствительность (1Вт, 1м) | 93дБ |
| Частотная характеристика | 70-20000Hz (when using DP-0206 (option)) |
| Частота кроссовера | 3500 Гц |
| Угол направленности | Горизонтально: 90°, Вертикально: 10° |
| Low Frequency Component | 10cm cone-type x8 |
| High Frequency Component | 2.5cm balanced dome-type x24 |
| Входные разъемы | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x2 |
| Размеры (Ш x В x Г) | 160 x 892 x 303mm (6.3 x 35.1 x 11.9 дюймов) |
| Масса | 16 kg (35.3 lbs) / Item Weight: 42.8 pounds (from product data) |
| Номер модели | СР-С4С |
Гарантия и поддержка
For warranty information, please refer to the warranty card included with your product or visit the official TOA website. For technical support, replacement parts, or service inquiries, please contact TOA customer service through their official channels. Provide your product model number (SR-S4S) and serial number when contacting support.
ТОА Электроника
Manufacturer of the SR-S4S Line Array Speaker System.
