1. Введение
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.
Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.
Основные характеристики
- 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
- Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
- Боковая панель из закаленного стекла: A 4mm thick tempered glass side panel provides a clear view ваших внутренних компонентов.
- Extensive Radiator Support: Supports up to a 360mm radiator for advanced liquid cooling solutions.
- Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
- Совместимость с материнской платой: Поддерживает материнские платы ATX, Micro-ATX и Mini-ITX.
Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.
2. Настройка и установка
Follow these steps to install your components into the Antec NX700 case.
2.1 Included Fans Installation
The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.
Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.
2.2 Конфигурация системы охлаждения
The NX700 supports various fan and radiator configurations to optimize cooling performance.
- Передний: Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
- Вершина: Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
- Задний: Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
- Кожух источника питания: Поддерживает 2 вентилятора размером 120 мм.
Figure 4: Diagram illustrating fan and radiator mounting options within the case.
Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.
2.3 Установка компонентов
The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.
- Материнская плата: Supports ATX motherboards (up to 305mm x 275mm).
- Процессорный кулер: Максимальная высота — 170 мм.
- Видеокарта (GPU): Максимальная длина 340 мм.
- Блок питания (БП): Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
- Хранилище: 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.
Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.
Рисунок 7: Внутренний view of the NX700 case with various components installed, demonstrating space and layout.
2.4 Video Guide for Assembly
Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.
Видео 1: Официальное завершениеview and assembly guide for the Antec NX700 Mid-Tower ATX Gaming Case.
3. Инструкция по эксплуатации
3.1 Функции панели ввода/вывода
The top I/O panel provides convenient access to essential controls and ports.
- Кнопка питания: Включает или выключает систему.
- Кнопка управления светодиодом: Cycles through various ARGB lighting modes for the included fans.
- Кнопка сброса: Перезапускает систему.
- Порты USB 3.0 (x2): Для высокоскоростной передачи данных.
- MIC/HD-AUDIO Jacks: Для подключения наушников и микрофонов.
Рисунок 8: Подробная информация view of the top I/O panel with power, LED control, USB 3.0, and audio ports.
3.2 Управление вентилятором ARGB
The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.
- Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
- Синхронизация материнской платы: To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.
Figure 9: The Antec NX700 case showcasing благодаря своим ярким возможностям ARGB-подсветки.
4. Техническое обслуживание
Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.
- Пылевые фильтры: Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
- Case Exterior: Протрите внешние поверхности мягкой, damp Ткань. Избегайте использования абразивных чистящих средств и растворителей.
- Панель из закаленного стекла: Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
- Внутренняя очистка: Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
5. Поиск Неисправностей
This section addresses common issues you might encounter with your Antec NX700 case.
5.1 Fans Not Spinning or Lighting Up
- Подключение питания: Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
- ARGB-подключение: Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
- LED Button Functionality: If using the case's LED button, ensure it is functioning. Try cycling through modes.
- Программное обеспечение материнской платы: If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
- Разъем Molex: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.
5.2 No Power to System
- PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
- Разъемы на передней панели: Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.
5.3 Missing Motherboard Mounting Stand-offs
While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.
6. Технические характеристики
Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.
| Особенность | Спецификация |
|---|---|
| Бренд | Антек |
| Ряд | NX700 |
| Название модели | NX700 |
| Номер модели товара | 0-761345-81072-2 |
| Тип корпуса | Средняя башня |
| Совместимость с материнской платой | АТХ, микро АТХ, мини ИТХ |
| Материал | SPCC + Plastic, Tempered Glass |
| Размеры продукта (ДxШxВ) | 17.32 x 8.66 x 19.37 дюйма (440 x 220 x 492 мм) |
| Вес товара | 15.84 фунта (7.2 килограмма) |
| Включенные вентиляторы | 2 x 185 мм ARGB-светодиода (спереди), 1 x 120 мм ARGB-светодиод (сзади) |
| Опора переднего вентилятора | 3 х 120 мм / 3 х 140 мм / 2 х 185 мм |
| Лучшая поддержка болельщиков | 2 х 120 мм / 2 х 140 мм |
| Опора заднего вентилятора | 1 х 120 мм / 1 х 140 мм |
| PSU Shroud Fan Support | 2 х 120 мм |
| Передняя опора радиатора | До 360 мм |
| Лучшая поддержка радиаторов | До 280 мм |
| Задняя опора радиатора | До 140 мм |
| Макс. высота кулера ЦП | 170 мм |
| Максимальная длина графического процессора | 340 мм |
| Максимальная длина блока питания | 200mm (with HDD) / 365mm (without HDD) |
| Отсеки для дисков | 2 x 3.5" HDD / 2.5" SSD (convertible), 4 x 2.5" SSD |
| Панель ввода/вывода | Power, LED Control, Reset, 2 x USB 3.0, MIC/HD-AUDIO |
Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.
Рисунок 11: Сзади view of the Antec NX700, showing expansion slots and fan mount.
7. Гарантия и поддержка
For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.
Официальный представитель Antec Webсайт: www.antec.com
