Введение
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-7000 MK2 Professional Upper Torque Turntable System. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Инструкции по технике безопасности
- Ensure the turntable is placed on a stable, level surface away from direct sunlight, heat sources, and excessive moisture.
- Не подвергайте устройство воздействию дождя или влаги во избежание возгорания или поражения электрическим током.
- Always disconnect the power cord from the outlet before cleaning or performing any maintenance.
- Не пытайтесь ремонтировать устройство самостоятельно. По всем вопросам обслуживания обращайтесь к квалифицированному специалисту.
- Хранить в недоступном для детей месте.
Содержимое упаковки
Your Reloop RP-7000 MK2 Professional Upper Torque Turntable System package should include the following items:
- 2 x Reloop RP-7000 MK2 Professional Upper Torque Turntable System
- 2 x Reloop Dust Cover for RP-7000/8000
- Knox Gear Vinyl Record Care System (includes brush, velvet cleaner, stylus brush, and cleaning solution)
- Силовые кабели
- Кабели RCA
- Противовесы
- Slipmats
- Руководство пользователя
Image: The complete bundle including two Reloop RP-7000 MK2 turntables, two dust covers, and the Knox Gear vinyl record care solution.
Настраивать
1. Распаковка и размещение
Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure there is adequate space around the unit for ventilation and cable connections.
Изображение: под углом view of the Reloop RP-7000 MK2 turntable, highlighting its main components.
2. Attaching the Dust Cover
Gently place the dust cover onto the turntable. The dust cover helps protect the platter and tonearm from dust and debris when the turntable is not in use.
Image: The Reloop RP-7000 MK2 turntable with its protective dust cover in place.
3. Подключение аудиокабелей
Connect the RCA cables from the turntable's output to the appropriate input on your mixer or amplifier. Ensure the ground wire is also connected to prevent hum.
Image: Rear panel of the Reloop RP-7000 MK2, displaying the RCA audio outputs, ground terminal, and power connection.
4. Подключение питания
Connect the power cable to the turntable and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
Инструкция по эксплуатации
1. Включение и выключение
To power on the turntable, flip the power switch located on the front left side to the ON position. To power off, flip the switch back to OFF.
Изображение: Вид сверху view of the Reloop RP-7000 MK2 turntable, illustrating the arrangement of its controls and components.
2. Воспроизведение записи
- Положите пластинку на тарелку.
- Select the appropriate speed (33, 45, or 78 RPM) using the speed buttons.
- Нажмите СТАРТ/СТОП кнопка для начала вращения диска.
- Carefully lower the tonearm onto the record using the cue lever.
Image: The Reloop RP-7000 MK2 turntable with a record playing, demonstrating the tonearm's position.
3. Pitch Control and Reverse Function
Use the pitch fader to adjust the playback speed. The ОБЕСПЕЧИТЬ РЕГРЕСС button allows for reverse playback of the record.
Обслуживание
1. Очистка проигрывателя
Regularly wipe the turntable's surface with a soft, dry cloth. For the dust cover, use a slightly damp cloth and avoid abrasive cleaners. The included Knox Gear Vinyl Record Care System can be used for cleaning records and the stylus.
Image: The Knox Gear Vinyl Record Care System, showing the velvet record brush, stylus brush, and cleaning solution bottle.
2. Уход за стилусом
Gently clean the stylus using the provided stylus brush. Always brush from back to front. A dirty stylus can degrade sound quality and damage records.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Нет электричества | Кабель питания не подключен; розетка неисправна. | Проверьте подключение кабеля питания. Попробуйте использовать другую розетку. |
| Нет звука | RCA-кабели не подключены; Amplifier/mixer input incorrect; Stylus damaged | Check RCA connections; Select correct input on amplifier/mixer; Inspect and replace stylus if necessary |
| Жужжащий шум | Заземляющий провод не подключен; помехи | Ensure ground wire is securely connected; Move turntable away from other electronic devices |
| Неправильная скорость воспроизведения | Wrong speed selected; Pitch fader not centered | Select correct RPM; Adjust pitch fader to center position |
Технические характеристики
- Бренд: Перезапуск
- Модель: РП-7000 МК2
- Технологии подключения: Проводной
- Особые характеристики: Balanced S-shaped Tone Arm, Dual Start/Stop Buttons, Precise Motor Control, Reverse Function, Freely Movable Aluminum LED Target Light
- Материал: Пластик
- Вес товара: 4.5 Kilograms (per turntable)
- Цвет: Deep black or classic silver metallic
- Совместимые устройства: Спикер, Наушники
Гарантия и поддержка
Reloop products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Reloop webили обратитесь к местному дистрибьютору. Сохраните чек о покупке для предъявления гарантийных претензий.
Для получения дополнительной помощи посетите Reloop Store on Amazon.
