KICKER 8" CompRT Subwoofer (48CWRT82) & Grille (43CWR8G) Instruction Manual

1. Введение

This manual provides essential information for the proper installation, operation, and maintenance of your KICKER 8-inch CompRT Series Subwoofer (Model 48CWRT82) and its accompanying 8-inch Subwoofer Grille (Model 43CWR8G). Please read these instructions thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.

2. Информация по технике безопасности

Всегда соблюдайте следующие меры предосторожности:

• Рекомендуется профессиональная установка: Car audio installation can be complex. If you are unsure about any part of the installation process, consult with a qualified professional installer.
• Электробезопасность: Disconnect the vehicle's battery negative terminal before beginning any electrical work to prevent short circuits and electrical damage. Ensure all wiring is properly insulated and secured.
• Защита органов слуха: Длительное воздействие высокого уровня звукового давления может привести к необратимому повреждению слуха. Соблюдайте осторожность при регулировке уровня громкости.
• Надежное крепление: Ensure the subwoofer and grille are securely mounted to prevent them from becoming projectiles in the event of a sudden stop or accident.
• Вентиляция: Ensure adequate ventilation around the subwoofer to prevent overheating, especially during extended periods of high-power operation.

3. Содержимое упаковки

Убедитесь, что ваш пакет содержит следующие предметы:

• KICKER 48CWRT82 8" CompRT Series Subwoofer
• KICKER 43CWR8G 8" Subwoofer Grille

4. Настройка и установка

Proper installation is crucial for the performance and durability of your subwoofer and grille.

4.1 Subwoofer Installation (Model 48CWRT82)

The KICKER 48CWRT82 is an 8-inch CompRT Series subwoofer designed for shallow-mount applications. It features a Dual Voice Coil (DVC) with a 2-ohm impedance per coil.

1. Выбор корпуса: This subwoofer is designed for compact, shallow-mount enclosures. Ensure your chosen enclosure meets the recommended volume specifications for optimal sound quality. The subwoofer's shallow mounting depth is 2-11/16 inches.
2. Проводка: The DVC 2-ohm configuration allows for various wiring options (e.g., 1-ohm or 4-ohm final impedance) depending on your amplifier's capabilities. Consult your amplifier's manual for compatible impedance loads. Ensure all connections are secure and properly insulated.
3. Монтаж: Secure the subwoofer firmly into the enclosure using appropriate screws. Ensure there are no air leaks around the mounting flange.
4. Устойчивость к атмосферным воздействиям: The CompRT series is weather-proof, making it suitable for outdoor powersports applications. Ensure all wiring connections are also protected from moisture if used in such environments.

Image: KICKER 8-inch CompRT Subwoofer (48CWRT82) showing the dual voice coil terminals for wiring.

Изображение: сбоку view of the KICKER 8-inch CompRT Subwoofer (48CWRT82), illustrating its shallow mounting depth and robust construction.

4.2 Grille Installation (Model 43CWR8G)

The KICKER 43CWR8G grille is designed to protect your 8-inch CompRT subwoofer from physical damage.

1. Выравнивание: Align the grille over the subwoofer, ensuring the bolt holes on the grille match those on the subwoofer's mounting ring.
2. Обеспечение: Use the provided hardware (if applicable) or appropriate screws to secure the grille firmly in place. The grille features custom bolt-hole covers for a clean finish.

Image: KICKER 8-inch Subwoofer Grille (43CWR8G) made of thick ABS construction, designed for protection.

Image: KICKER 8-inch CompRT Subwoofer (48CWRT82) with the 8-inch Subwoofer Grille (43CWR8G) properly installed, providing protection.

5. Инструкция по эксплуатации

Once installed, your KICKER CompRT subwoofer is ready for operation. Ensure your amplifier is properly configured to drive a 2-ohm DVC subwoofer.

• Мощность обработки: The subwoofer can handle up to 600 watts peak power and 300 watts RMS power. Avoid exceeding these limits to prevent damage.
• AmpНастройки лифта: Отрегулируйте свой amplifier's gain, crossover, and bass boost settings according to your system's requirements and personal preference. Start with low settings and gradually increase them.
• Период обкатки: Allow a break-in period of several hours of moderate listening before operating the subwoofer at maximum power. This allows the suspension components to loosen and perform optimally.
• Качество звука: The subwoofer is designed to produce deep, powerful bass. If you experience distorted sound, reduce the volume or check your ampнастройки лифера.

6. Техническое обслуживание

Regular maintenance helps preserve the performance and appearance of your KICKER subwoofer and grille.

• Уборка: Use a soft, dry cloth to wipe down the subwoofer cone and grille. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the voice coil area. Avoid harsh chemicals or abrasive cleaners.
• Инспекция: Periodically inspect the subwoofer for any signs of damage to the cone, surround, or terminals. Check the grille for cracks or loose mounting.
• Охрана окружающей среды: While the subwoofer is weather-proof, prolonged exposure to extreme conditions (e.g., direct sunlight, heavy rain) should be minimized to extend its lifespan.

7. Поиск Неисправностей

Если у вас возникли проблемы с сабвуфером, воспользуйтесь следующими распространенными шагами по устранению неполадок:

• Нет звука:
  • Проверьте все соединения проводов. ampЛифтер к сабвуферу.
  • Проверьте ampУсилитель включен и принимает сигнал.
  • Ensure the head unit (source) is functioning correctly.
• Искаженный звук:
  • Уменьшить ampНастройка усиления усилителя.
  • Check for proper crossover settings to ensure the subwoofer is only playing low frequencies.
  • Убедитесь, что мощность сабвуфера не превышает и не недостаточна. ampпожизненнее.
  • Осмотрите диффузор и подвес сабвуфера на наличие каких-либо механических повреждений.
• Перегрев:
  • Проверьте amplifier's impedance load matches the subwoofer's wiring configuration (e.g., 1-ohm or 4-ohm).
  • Обеспечьте достаточную вентиляцию вокруг сабвуфера и ampпожизненнее.
  • Reduce prolonged high-volume operation.

If these steps do not resolve the issue, contact KICKER customer support or your authorized dealer.

8. Технические характеристики

9. Информация о гарантии

This KICKER product comes with a Full Warranty. Specific terms and conditions of the warranty, including duration and coverage details, are provided by KICKER and your authorized retailer at the time of purchase. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the documentation included with your product or visit the official KICKER webсайт.

10 Поддержка

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact KICKER customer support or your authorized KICKER dealer. You can find contact information on the official KICKER webсайте или через упаковку вашего продукта.