1. Продукт закончилсяview
The DieseRC Radio Frequency Light Remote Control Switch system allows for wireless control of lights and other electrical appliances. It consists of a relay receiver and two remote control transmitters, operating on a 433MHz RF frequency. This manual provides instructions for installation, setup, and operation.
2. Содержимое упаковки
- 1x Relay Receiver
- 2x Transmitters (with CR2016 batteries included)
- 1x Руководство по эксплуатации изделия (данный документ)
3. Технические характеристики продукта
| Параметр | Ценить |
|---|---|
| Приемник рабочий объемtage | Переменный ток 85В~240В |
| Ток покоя | <5мА |
| Максимальный ток | 10А |
| Частота РЧ | 433МГц |
| Рабочая температура | -30°С ~ +80°С |
| Чувствительность приема | > 97 дБм |
| Пульты дистанционного управления хранилищем | До 20 штук |
| Поддержка кодирования | 1527 Код обучения |
| Режим работы радиочастотного сигнала | Супергетеродинный беспроводной прием ASK |
| Receiving Range (Open Space) | > 50 метров |
| Конфигурация контактов | N / L |
| Режимы работы | Мгновенный / Переключаемый / Фиксированный режим |
| Аккумулятор передатчика | 2x CR2016 (входит в комплект) |
| Ватtage | 1500 Вт |
| Максимальный ток переключения | 10 Amps |
4. Установка
The receiver unit is designed for easy integration into existing electrical systems. It should be installed between the power supply and the device you wish to control (e.g., a lamp). The compact size (70*38*21 mm) allows for flexible placement. Ensure all power is disconnected before installation.
The receiver is housed in a protective box for enhanced safety. No complex wiring is required for basic operation, but professional installation is recommended for those unfamiliar with electrical work.
5. Режимы работы
The receiver supports three distinct operating modes: Momentary, Toggle, and Latched. The desired mode must be set during the setup process.
5.1. Режим мгновенного действия
In Momentary Mode, the relay activates only while the remote button is pressed. ReleasinКнопка отключает реле.
- Press and hold one button on the transmitter: The connected device will turn ON.
- Release the button: The connected device will turn OFF.
5.2. Переключить режим
In Toggle Mode, each press of the remote button alternates the relay's state (ON/OFF).
- Press a button on the transmitter: The connected device will turn ON.
- Нажмите такой же button again: The connected device will turn OFF.
Примечание: The product is typically pre-set to Toggle Mode from the factory.
5.3. Зафиксированный режим
Latched Mode requires two distinct buttons on the remote: one for ON and one for OFF.
- Press the "ON" button: The connected device will turn ON.
- Press the "OFF" button: The connected device will turn OFF.
Примечание: This mode requires a remote with at least two distinct buttons for ON/OFF functionality.
6. Настройка и сопряжение
To pair a transmitter with the receiver and set the operating mode, follow these steps:
6.1. Сопряжение в режиме кратковременного действия
- Нажмите кнопку обучения на приемнике. 1 раз.
- Подождите примерно 3 секунд.
- Press any button on the transmitter. The pairing is successful.
6.2. Сопряжение для переключения режима
- Нажмите кнопку обучения на приемнике. 2 раза.
- Подождите примерно 3 секунд.
- Press any button on the transmitter. The pairing is successful.
6.3. Сопряжение в режиме фиксации
- Нажмите кнопку обучения на приемнике. 3 раза.
- Подождите примерно 3 секунд.
- Press the desired "ON" button on the transmitter.
- Press the desired "OFF" button on the transmitter. The pairing is successful.
Примечание: For Latched Mode, you need a transmitter with at least two distinct buttons to assign ON and OFF functions.
7. Сброс настроек приемника
To clear all paired transmitters from the receiver's memory:
- Нажмите кнопку обучения на приемнике. 8 раза последовательно.
- Сброс выполнен успешно.
Важный: After a reset, all previously paired remote controls will no longer function with this receiver. You will need to re-pair them following the setup instructions above.
8. Product Features and Applications
The DieseRC RF Wireless Relay Module offers robust performance and versatility:
- Сильный сигнал: The 433MHz radio frequency signal can penetrate walls, floors, and doors, providing reliable control within a 50-meter range in open areas.
- High Capacity Relay: Оснащен 10 Amp relay, it can handle high-power electrical appliances up to 1500W.
- Прочные компоненты: The high-quality relay is rated for over 400,000 operations, and the remote control transmitter buttons are designed for over 500,000 clicks.
- Широкий объемtagе Совместимость: The receiver supports AC 85V~250V, making it suitable for 110V, 220V, 230V, and 240V systems.
- Компактный дизайн: The mini size of the receiver (70*38*21 mm) and the portable key-fob style transmitters ensure convenience and discreet installation.
This system is suitable for a wide range of applications in homes, farms, factories, offices, laboratories, and supermarkets. It can remotely control various devices such as lamps, lighting fixtures, ventilation equipment, food waste disposers, and other DIY wireless projects.
9. Transmitter Details
The remote control transmitter features a simple design for ease of use.
The transmitter includes an indicator light, a silicone button for operation, and a metal keychain for portability. It is powered by two CR2016 batteries, which are replaceable.
