Poly Rove B2 Single/Dual Cell DECT Base Station User Manual

1. Введение

This user manual provides detailed instructions for the installation, operation, and maintenance of your Poly Rove B2 Single/Dual Cell DECT Base Station. This base station is designed to seamlessly integrate with the Poly Rove family of handsets, providing reliable and secure wireless communication.

The Poly Rove B2 base station supports both single and dual-cell modes, offering flexibility to scale your communication system as your organization's needs evolve. Its robust DECT wireless security ensures that your conversations remain private and protected.

Рисунок 1: Передняя часть view of the Poly Rove B2 DECT Base Station, showing the Poly logo and a green status indicator light.

2. Что в коробке

Проверьте наличие всех предметов в посылке:

• Базовая станция
• Стоять
• Ethernet-кабель
• Адаптер питания
• Комплект для настенного монтажа
• Карта быстрого старта
• Паспорт безопасности

3.Основные характеристики

• Технология: Single or dual-cell DECT base station designed for use with the Poly Rove family of handsets.
• Масштабируемость: Allows for flexible scaling by choosing various quantities of handsets to meet evolving organizational needs.
• Безопасность: Features DECT wireless security to ensure conversations are safe and secure, maintaining DECT encryption even in repeater mode.
• Производительность: Incorporates Poly's redundancy feature, ensuring continuous operation of your communication solution even if a base station experiences an issue.

4. Руководство по установке

4.1 Подключение базовой станции

1. Подключение питания: Connect the power adapter to the base station's power port and then plug it into a power outlet.
2. Подключение к сети: Connect one end of the Ethernet cable to the LAN port on the base station and the other end to your network router or switch.
3. Размещение: Place the base station on a flat, stable surface using the provided stand, or use the wall mounting kit for secure wall installation. Ensure optimal placement for DECT signal coverage.

Рисунок 2: Сзади view of the Poly Rove B2 DECT Base Station, illustrating the Ethernet and power connections.

4.2 Первоначальное включение питания

Once connected, the base station will power on automatically. Observe the status indicator light on the front of the unit. A solid green light typically indicates a successful power-on and network connection. Refer to the Quick Start Card for specific LED indicator meanings.

Рисунок 3: Сверху вниз view of the Poly Rove B2 DECT Base Station, showing the compact design and cable routing.

5. Операция

5.1 Pairing Handsets

The Poly Rove B2 base station is designed to work with Poly Rove handsets. Refer to your specific Poly Rove handset's user manual for detailed instructions on how to pair it with the base station. The base station provides the DECT signal for secure and reliable wireless communication with paired handsets.

5.2 Single vs. Dual Cell Mode

The Rove B2 base station can operate in either single-cell or dual-cell mode. The configuration of this mode is typically managed through the system's administration interface, not directly on the base station itself. Consult your system administrator or the Poly Rove system documentation for details on configuring and utilizing these modes to optimize coverage and capacity for your environment.

5.3 DECT Wireless Security

The base station utilizes DECT wireless security protocols to encrypt all communications between the base station and paired handsets. This ensures the privacy and integrity of your conversations, even when operating in repeater mode.

6. Техническое обслуживание

6.1 Очистка

To clean the base station, gently wipe the exterior with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents, as these may damage the finish or internal components. Ensure the device is powered off and unplugged before cleaning.

6.2 Экологические соображения

To ensure optimal performance and longevity, operate the base station within recommended environmental conditions. Avoid exposing the device to extreme temperatures, direct sunlight, high humidity, or dusty environments. Ensure proper ventilation around the unit.

7. Поиск Неисправностей

7.1 Нет питания

• Ensure the power adapter is securely connected to both the base station and a working power outlet.
• Убедитесь, что розетка активна, проверив её с помощью другого устройства.

7.2 Нет подключения к сети

• Check that the Ethernet cable is securely connected to both the base station and your network router/switch.
• Verify that your network router/switch is functioning correctly and has an active internet connection.
• Restart your network equipment (router, switch) and the base station.

7.3 Handsets Not Connecting

• Ensure the handsets are within the DECT range of the base station.
• Confirm that the handsets are properly paired with the base station according to their respective user manuals.
• Check for any obstructions or interference sources that might be affecting the DECT signal.

7.4 System Redundancy

The Poly Rove system includes a redundancy feature designed to maintain operation even if a base station fails. If you experience system-wide communication issues, consult your system administrator or Poly support for assistance in leveraging this feature or diagnosing a potential base station failure.

8. Технические характеристики

9. Гарантия и поддержка

9.1 Информация о гарантии

For detailed warranty information regarding your Poly Rove B2 DECT Base Station, please refer to the warranty card included in your product packaging or visit the official Poly webсайт. Условия гарантии могут различаться в зависимости от региона.

9.2 Техническая поддержка

If you encounter any issues or require technical assistance, please contact Poly customer support. You can find contact information and additional resources, including FAQs and software downloads, on the official Poly support webсайт.

Visit the official Poly Store for more products and information: Магазин Poly на Amazon