Crosley C6B-DB Belt-Drive Bluetooth Turntable Record Player User Manual

1. Введение

This manual provides instructions for the setup, operation, and maintenance of your Crosley C6B-DB Belt-Drive Bluetooth Turntable. The C6B-DB is a fully manual two-speed turntable designed to deliver an authentic analog listening experience. It features a durable MDF plinth, a heavy steel platter, and a low-vibration synchronous motor. The adjustable tonearm with a pre-installed moving magnet cartridge allows for precise tracking. Connectivity options include RCA outputs for wired speakers and built-in Bluetooth for wireless streaming to external speakers. Please read this manual thoroughly before using your turntable.

2. Информация по технике безопасности

Please observe the following safety precautions to prevent damage to the unit and ensure safe operation:

• Не подвергайте устройство воздействию дождя или влаги.
• Не подвергайте устройство воздействию прямых солнечных лучей, источников тепла или экстремальных температур.
• Обеспечьте надлежащую вентиляцию вокруг устройства.
• Используйте только адаптер питания, поставляемый в комплекте с устройством.
• Не пытайтесь разбирать или модифицировать устройство. По всем вопросам обслуживания обращайтесь к квалифицированному персоналу.
• Держите устройство вдали от сильных магнитных полей.
• Handle the stylus with care to avoid damage and injury.

3. Что в коробке

Убедитесь, что все перечисленные ниже предметы включены в ваш пакет:

• Crosley C6B-DB Turntable Unit
• Адаптер питания
• Руководство пользователя
• Пылезащитный чехол
• блюдо
• Приводной ремень
• Войлочный коврик
• Противовес
• Антискейтинговый вес

4. Продукт закончилсяview

Familiarize yourself with the components of your Crosley C6B-DB turntable.

Рисунок 1: Crosley C6B-DB Turntable with its clear dust cover in place. This image shows the overall design of the turntable, including the plinth, platter, tonearm, and the protective dust cover.

4.1 Топ View Компоненты

• Пылезащитный чехол: Защищает проигрыватель от пыли, когда он не используется.
• Блюдо: The surface on which records are placed. Made of heavy steel for stability.
• Войлочный коврик: Provides a soft surface for records and helps reduce static.
• Шпиндель: Держит рекорд на блюде.
• Тонарм: Holds the cartridge and stylus, guiding it across the record grooves.
• Картридж: Converts groove vibrations into electrical signals. The C6B-DB comes with a pre-installed moving magnet cartridge.
• Стилус (игла): The tip of the cartridge that reads the record grooves.
• Противовес: Adjusts the tracking force of the tonearm.
• Anti-skate Dial: Compensates for the inward force on the tonearm, ensuring even tracking.
• Рычаг подсвечивания: Raises and lowers the tonearm gently.
• Селектор скорости: Переключайтесь между 33 1/3 об/мин и 45 об/мин.

Рисунок 2: Сверху вниз view of the turntable, highlighting the platter, felt mat, spindle, and the tonearm assembly. The speed selector switch is visible on the left side of the plinth.

Рисунок 3: A detailed close-up of the pre-installed moving magnet cartridge and stylus on the tonearm. This component is crucial for converting the physical grooves of a record into an audio signal.

4.2 Соединения на задней панели

• Наземный терминал: For connecting a ground wire from an amplifier/receiver to reduce hum.
• Выход RCA (Л/П): Подключается к ampгромкоговорители или активные динамики.
• Фоно/линейный переключатель: Selects between the built-in preamplifier (Line) or an external phono preamplifier (Phono).
• ВХОД ПОСТОЯННОГО ТОКА 12 В: Входное напряжение для прилагаемого адаптера.
• Индикатор Bluetooth: LED light indicating Bluetooth pairing status.
• Выключатель: Turns the turntable on or off.

Рисунок 4: The rear panel of the turntable, showing the ground terminal, RCA L/R outputs, Phono/Line switch, DC 12V power input, Bluetooth indicator, and the main power switch.

5. Настройка

Follow these steps to set up your turntable for first use.

5.1 Распаковка и размещение

1. Аккуратно извлеките все компоненты из упаковки.
2. Place the turntable on a stable, level surface away from direct sunlight, heat, and vibrations.
3. Ensure there is enough space around the turntable for proper ventilation and operation.

5.2 Установка диска и ремня

1. Поместите тарелку на шпиндель поворотного стола.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and then around the motor pulley. Ensure the belt is not twisted.
3. Положите фетровый коврик поверх тарелки.

5.3 Регулировка баланса тонарма и прижимной силы

Proper tonearm adjustment is crucial for optimal sound quality and to prevent damage to your records and stylus.

1. Снимите защитный колпачок со стилуса.
2. Place the counterweight onto the rear of the tonearm. Rotate it clockwise until it is approximately halfway on.
3. With the cueing lever in the down position, carefully balance the tonearm by rotating the counterweight until the tonearm floats horizontally. Do not let the stylus touch the platter or record.
4. Once balanced, hold the counterweight steady and rotate the numbered ring on the front of the counterweight until "0" aligns with the line on the tonearm.
5. Rotate the entire counterweight (both parts) counter-clockwise to the recommended tracking force. For the pre-installed cartridge, a tracking force of 2.0 grams is typically recommended. Refer to your cartridge manufacturer's specifications for precise values.

5.4 Anti-skate Adjustment

The anti-skate mechanism prevents the tonearm from being pulled inward excessively.

1. Attach the small loop of the anti-skate weight's thread to the anti-skate post on the tonearm.
2. Pass the thread through the wire support.
3. Set the anti-skate dial to the same value as your tracking force (e.g., 2.0 for 2.0 grams tracking force).

5.5 Аудиоподключение

Connect your turntable to an audio system.

• Использование встроенных предустановокamplifier (Line Out): Connect the RCA cables from the turntable's RCA outputs to a Line-level input (AUX, CD, Tuner) on your amplifier or powered speakers. Set the Phono/Line switch on the turntable's rear panel to "Line".
• Использование внешнего предварительного просмотраamplifier (Phono Out): Если ваш amplifier has a dedicated Phono input, connect the RCA cables from the turntable's RCA outputs to the Phono input on your amplifier. Set the Phono/Line switch on the turntable's rear panel to "Phono". Connect the ground wire from the turntable to the ground terminal on your ampпожизненнее.

5.6 Подключение питания

Connect the power adapter to the DC IN 12V port on the turntable and then plug it into a wall outlet.

6. Операция

Instructions for playing records and using Bluetooth connectivity.

6.1 Воспроизведение пластинки

1. Ensure the turntable is powered on using the switch on the rear panel.
2. Select the correct speed (33 1/3 or 45 RPM) using the speed selector switch on the plinth.
3. Place a record on the felt mat.
4. Поднимите тонарм с помощью рычага подъема.
5. Вручную установите тонарм на нужную начальную канавку пластинки.
6. Осторожно опустите тонарм с помощью рычага позиционирования. Игла начнет воспроизведение пластинки.
7. Для остановки воспроизведения поднимите тонарм с помощью рычага инициализации и верните его на опору тонарма.

6.2 Bluetooth Out Function

The C6B-DB can stream audio wirelessly to external Bluetooth speakers.

1. Убедитесь, что ваша внешняя Bluetooth-колонка находится в режиме сопряжения.
2. Turn on the turntable. The Bluetooth indicator light on the rear panel will flash, indicating it is searching for a device.
3. После подключения индикатор Bluetooth загорится синим цветом и будет гореть постоянно.
4. You can now play records, and the audio will stream to your paired Bluetooth speaker.
5. To disconnect, turn off the Bluetooth speaker or the turntable.

7. Техническое обслуживание

Regular maintenance helps prolong the life of your turntable and records.

7.1 Очистка проигрывателя

• Wipe the dust cover and plinth with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• For the stylus, use a soft brush designed for stylus cleaning, brushing gently from back to front.

7.2 Замена стилуса

The stylus is a consumable part and should be replaced after approximately 300-500 hours of playback, or if you notice a degradation in sound quality. The C6B-DB is compatible with NP5 replacement needles.

1. Gently pull the old stylus assembly downwards and forwards to remove it from the cartridge.
2. Align the new stylus assembly with the cartridge body and push it upwards until it clicks into place.

8. Поиск Неисправностей

If you experience issues with your turntable, refer to the following common problems and solutions.

9. Технические характеристики

10. Гарантия и поддержка

Crosley products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Crosley website. If you encounter any issues or require technical assistance, please contact Crosley customer support.

Служба поддержки Crosley: www.crosleyradio.com/support