REDARC SPFP1200

REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200 User Manual

1. Введение

This manual provides essential information for the safe and efficient use of your REDARC 200W Monocrystalline Portable Folding Solar Panel (Model: SPFP1200). Please read these instructions carefully before setup and operation to ensure optimal performance and longevity of your solar panel. This product is designed to convert sunlight into electrical energy for charging 12V battery systems.

2. Информация по технике безопасности

Для предотвращения травм и повреждения изделия соблюдайте следующие меры предосторожности:

  • Do not attempt to disassemble, modify, or repair the solar panel. Unauthorized modifications can be dangerous and will void the warranty.
  • Handle the solar panel with care. Avoid dropping or subjecting it to strong impacts.
  • Ensure all electrical connections are secure and correctly polarized before connecting to a battery or charge controller. Incorrect wiring can cause damage.
  • Do not touch exposed wires or terminals when the panel is exposed to sunlight, as it will generate electricity.
  • Keep the solar panel away from open flames, flammable gases, and liquids.
  • Always use an appropriate solar charge controller between the solar panel and the battery to prevent overcharging and reverse current flow.
  • Во время работы солнечной панели держите детей и домашних животных подальше от нее.

3. Содержимое упаковки

Проверьте наличие всех предметов в упаковке:

  • REDARC 200W Monocrystalline Portable Folding Solar Panel
  • Integrated adjustable support legs
  • Connection cables (typically with Anderson-style plugs or similar)
  • Руководство пользователя (этот документ)

4. Настройка

Follow these steps to set up your portable folding solar panel:

  1. Разверните панель: Carefully unfold the solar panel sections on a flat, stable surface.
  2. Position the Legs: Extend and lock the integrated adjustable support legs to prop up the panel. Ensure the legs are stable and can support the panel's weight.
  3. Angle Towards the Sun: Adjust the angle of the panel using the support legs to face directly towards the sun for maximum efficiency. The optimal angle will vary depending on your location and the time of day.
  4. Connect to Charge Controller: Connect the solar panel's output cable to the input terminals of a compatible solar charge controller. Ensure correct polarity (positive to positive, negative to negative).
  5. Подключение к аккумулятору: Connect the output terminals of the solar charge controller to your 12V battery system. Always connect the charge controller to the battery до connecting it to the solar panel.

Image: REDARC 200W Monocrystalline Portable Folding Solar Panel in deployed state.

REDARC 200W Monocrystalline Portable Folding Solar Panel deployed with adjustable legs

This image shows the REDARC 200W Monocrystalline Portable Folding Solar Panel unfolded and set up with its adjustable legs, ready for sun exposure. The panel's dark, reflective surface indicates its monocrystalline cells, and the sturdy frame is visible.

5. Операционная

Once set up, the solar panel will begin generating power when exposed to sunlight. The charge controller will regulate the power flow to your battery.

  • Зарядка монитора: Observe the indicators on your solar charge controller to confirm that the battery is charging correctly.
  • Adjust for Sun: For best results, periodically adjust the panel's angle throughout the day to follow the sun's path.
  • Факторы окружающей среды: Cloud cover, shade, and dust on the panel will reduce power output.

Официальных видеороликов о продукте, которые можно было бы встроить в данное руководство, от продавца не найдено.

6. Техническое обслуживание

Regular maintenance ensures optimal performance and extends the lifespan of your solar panel:

  • Уборка: Clean the surface of the solar panel regularly with a soft, damp Протрите тканью пыль, грязь и мусор. Избегайте использования абразивных чистящих средств и едких химикатов.
  • Проверьте соединения: Periodically check all electrical connections for corrosion, looseness, or damage. Ensure they are clean and secure.
  • Хранилище: When not in use, fold the solar panel and store it in a dry, cool place, away from direct sunlight and extreme temperatures. Use the provided carrying case if available.
  • Физический осмотр: Inspect the panel for any physical damage, such as cracks in the glass or frame, before and after each use.

7. Поиск Неисправностей

If you encounter issues with your solar panel, refer to the table below for common problems and solutions:

ПроблемаВозможная причинаРешение
От панели не подается питание.No sunlight, panel in shade, dirty panel surface, faulty connection.Move panel to direct sunlight, remove any shading, clean panel surface, check all connections.
Низкая выходная мощностьPartial shading, incorrect panel angle, cloudy weather, dirty panel, undersized charge controller.Ensure full sun exposure, adjust panel angle, clean panel, verify charge controller is rated for 200W.
Аккумулятор не заряжаетсяCharge controller fault, incorrect wiring, battery fault, insufficient solar input.Check charge controller status, verify wiring polarity, test battery, ensure adequate sunlight.
Панель выглядит поврежденной.Physical impact, improper handling.Discontinue use. Contact REDARC support for assistance. Do not attempt repairs.

8. Технические характеристики

Key technical specifications for the REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200:

СпецификацияЦенить
БрендРЕДАРК
Номер моделиSPFP1200
Максимальная мощность200 Вт
Материалмонокристаллический
ЭффективностьВысокая эффективность
Вес товара24.2 фунта (10.98 кг)
Размеры продукта (в сложенном виде)Примерно 34.6 х 30.9 х 3.7 дюйма (87.9 х 78.5 х 9.4 см)
СтильРегулируемый, портативный
ПроизводительРЕДАРК Электроника

9. Гарантия и поддержка

REDARC products are manufactured to high standards and come with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are typically provided with your purchase documentation or can be found on the official REDARC webсайт. Пожалуйста, сохраните доказательство покупки для гарантийных претензий.

For technical support, warranty inquiries, or service, please contact REDARC customer service directly. Refer to the REDARC webсайт для получения самой актуальной контактной информации и ресурсов поддержки.

Связанные документы - SPFP1200

Предварительноview Установка креплений REDARC ABS для стационарных монокристаллических солнечных панелей
Руководство по установке креплений REDARC ABS для стационарных монокристаллических солнечных панелей на автодомах и лодках без сверления, обеспечивая герметичность. Распространяется на модели SMI9001, SMI9002, SMI9003 и SMI9007.
Предварительноview REDARC 12 В - 24 В одноконтурный, объемtage-бустеры: VI180D, VI360D, VI720D Руководство пользователя
В этом документе содержатся подробные технические характеристики, функции, руководство по установке и информация о гарантии на одноконтурные блоки питания REDARC серии VI с напряжением от 12 до 24 В.tage Бустеры, включая модели VI180D, VI360D и VI720D.
Предварительноview Монокристаллические солнечные панели REDARC: модели SMSP1050–SMSP1200 — руководство по установке и безопасности
Подробное руководство по монокристаллическим солнечным панелям REDARC (SMSP1050, SMSP1080, SMSP1120, SMSP1180, SMSP1200), включающее технические характеристики, информацию о безопасности, установке, подключении и гарантии для применения в автодомах и караванах.
Предварительноview Монокристаллические солнечные панели REDARC: руководство по установке, характеристикам и безопасности
Подробное руководство по монокристаллическим солнечным панелям REDARC (SMSP1050-SMSP1200), включающее функции, подробные технические характеристики, инструкции по установке, схемы электропроводки, меры предосторожности и информацию о гарантии.
Предварительноview Монтажный комплект GPC для REDARC ALPHA R 50A — руководство по установке INEOS GRENADIER
Подробное руководство по установке монтажного комплекта GPC для двухаккумуляторной системы REDARC ALPHA R 50A, специально для автомобиля INEOS GRENADIER. Включает пошаговые инструкции, предупреждения по технике безопасности и информацию по вводу в эксплуатацию.
Предварительноview Зарядное устройство REDARC BCDC ALPHA 100R: 12 В 100 А DC-DC с Bluetooth, инструкция по установке.
Ознакомьтесь с REDARC BCDC ALPHA 100R, зарядным устройством для аккумуляторов постоянного тока 12 В 100 А, оснащенным интеллектуальным мониторингом состояния батареи и возможностью подключения по Bluetooth. В этом руководстве представлены подробные сведения об установке, настройке и эксплуатации для оптимального управления питанием автомобиля.