XTOOL TP150 TPMS Relearn Tool Руководство пользователя
Model: XT-TP150
1. Введение
The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.
2. Информация по технике безопасности
Always observe the following safety precautions when operating the TP150 tool:
- Перед использованием внимательно прочтите все инструкции.
- Do not operate the tool in wet conditions or near flammable liquids/gases.
- Перед подключением или отключением кабеля OBDII убедитесь, что зажигание автомобиля выключено.
- Use only the accessories and parts specified by XTOOL.
- Держите инструмент подальше от детей.
- Properly dispose of old TPMS sensors and batteries according to local regulations.
3. Продукт закончилсяview
The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.
Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.
3.1.Основные характеристики
- TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
- Повторное обучение TPMS: Supports OBD Relearn and Static Relearn for all sensors.
- Программирование TPMS: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
- Диагностика TPMS: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
- Отображение данных в реальном времени: Shows sensor ID, tire pressure, temperature, and sensor voltage.
- Проверка информации о штатных датчиках: Displays brand, part number, and frequency of OE sensors.
4. Настройка
4.1. Первоначальная настройка устройства
- Распаковать: Carefully remove the TP150 tool and accessories from the packaging.
- Включение питания: Нажмите кнопку питания, чтобы включить устройство.
- Обновление программного обеспечения: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)
4.2. Подключение к автомобилю
- Найдите разъем OBDII автомобиля, обычно он расположен под приборной панелью со стороны водителя.
- Убедитесь, что зажигание автомобиля находится в положении «ВЫКЛ».
- Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
- Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.
5. Инструкция по эксплуатации
The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.
5.1. Activating TPMS Sensors
- В главном меню выберите "TPMS" or "Activate".
- Выберите марку, модель и год выпуска автомобиля.
- Выбирать "Activate Sensor".
- Hold the TP150 tool near each tire's valve stem and press the activation button.
- The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.
5.2. Процедуры переобучения системы TPMS
Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.
- В главном меню выберите "TPMS", затем "Relearn".
- Select the vehicle make, model, and year.
- Choose the appropriate relearn method:
- Переобучение OBD: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
- Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
- Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.
5.3. Programming XTOOL Sensors
The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.
- В главном меню выберите "TPMS", затем "Program Sensor".
- Place the XTOOL sensor to be programmed near the TP150's antenna.
- Выберите один из следующих методов программирования:
- Автоматическая генерация идентификаторов: The tool generates a new, unique sensor ID.
- Enter ID Manually: Input a specific sensor ID if known.
- Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
- Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
- Follow the on-screen prompts to complete the programming.
5.4. Diagnosing TPMS System
- Connect the TP150 to the vehicle's OBDII port.
- В главном меню выберите "TPMS", затем «Диагностика».
- The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
- Review the displayed DTCs to identify system faults.
- After repairs, select "Clear DTCs" to erase the codes and reset the TPMS warning light.
6. Техническое обслуживание
- Уборка: Протрите устройство мягкой, дamp Ткань. Не используйте абразивные чистящие средства или растворители.
- Хранилище: Store the TP150 in its protective case in a dry, cool environment when not in use.
- Обновления программного обеспечения: Регулярно проверяйте наличие обновлений программного обеспечения и устанавливайте их, чтобы обеспечить оптимальную производительность и совместимость с новыми моделями автомобилей и датчиками.
- Уход батареи: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.
7. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Устройство не включается. | No power from OBDII port; faulty cable; device issue. | Check OBDII connection; try on another vehicle; ensure vehicle ignition is ON. |
| Cannot activate sensor. | Sensor out of range; sensor faulty/dead battery; incorrect vehicle selection; outdated software. | Ensure tool is close to valve stem; check sensor condition; verify vehicle details; update software. |
| Relearn fails. | Incorrect relearn procedure; vehicle specific issues; outdated software. | Follow on-screen instructions precisely; ensure all sensors are activated; update software. |
| Cannot program non-XTOOL sensors. | The TP150 only programs XTOOL brand sensors. | This is expected behavior. Use XTOOL sensors for programming. |
8. Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | X-TOOL |
| Номер модели | XT-TP150 |
| Вес товара | 3.52 фунта |
| Размеры упаковки | 10.79 x 9.84 x 4.09 дюйма |
| Источник питания | Handheld (OBDII powered) |
| Операционная система | Андроид 4.4 |
| СКП | 789605296901 |
| Дата первой доступности | 3 июля 2021 г. |
9. Гарантия и поддержка
9.1. Информация о гарантии
XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.
9.2. Техническая поддержка
For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:
- Официально Webсайт: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
- Поддержка по электронной почте: Обратитесь к разделу контактов на официальном сайте. webсайт.
- Интернет-ресурсы: Many helpful guides and videos may be available on the XTOOL webили на их официальных страницах в социальных сетях.
When contacting support, please have your product model (XT-TP150) and serial number ready.
