Введение
Thank you for choosing the BLS T36-3 36 LED Closet Light. This super bright, battery-powered under cabinet lighting solution is designed to enhance visibility and convenience in various indoor spaces. Featuring a motion sensor and a 1500mAh rechargeable battery, these wireless lights offer efficient and flexible illumination.
- 36 сверхъярких светодиодов: Provides 180 Lumens of 5500K Daylight White light, ideal for closets, cabinets, kitchens, and more.
- Ultra-Long Battery Run Time: Equipped with a 1500mAh rechargeable battery, offering up to 120 days of use (based on 10 uses/day, 20 seconds/use).
- Reliable Motion Sensor with 2 Modes: Features ON/OFF/AUTO NIGHT/AUTO DAY & NIGHT modes. BLS Constant-Sense technology ensures the light stays on as long as motion is detected, turning off 15 seconds after inactivity.
- Беспроводная установка: Built-in strong magnets allow for easy attachment to metal surfaces or use with provided 3M adhesive magnetic plates for non-metal surfaces.
- Широкое применение: Suitable for various indoor locations including wardrobes, attics, basements, drawers, garages, and vanity mirrors.
Инструкции по установке
- Зарядите фары: Before first use, fully charge each LED light using the provided USB charging cable. The charging port is located on the side of the light. A red indicator light typically signifies charging, turning green or off when fully charged.
- Подготовьте монтажную поверхность: Убедитесь, что поверхность, на которую планируется установить оборудование, чистая, сухая и гладкая.
- Attach Magnetic Plates (for non-metal surfaces):
- Peel off the protective film from one side of the 3M adhesive on the magnetic plate.
- Firmly press the adhesive side of the magnetic plate onto the desired installation location.
- Repeat for all lights.
- Установите огни:
- If installing on a metal surface, simply attach the light directly as it has a built-in strong magnet.
- If using magnetic plates, align the magnets on the back of the LED light with the installed magnetic plates and gently attach. The lights are easily detachable for recharging.
Инструкция по эксплуатации
The BLS T36-3 LED Closet Light features a slide switch with multiple operating modes:
- OFF: Power off the light.
- АВТО НОЧЬ (значок Луны): Motion sensor mode. The light will only turn on when it detects motion in dark or very dim conditions. Ideal for bedrooms, hallways, or basements at night.
- AUTO DAY & NIGHT (Sun Icon): Motion sensor mode. The light will turn on when it detects motion, regardless of ambient light conditions (day or night). Suitable for closets, cabinets, or under-cabinet lighting where light is needed at all times.
- НА: The light remains continuously on, regardless of motion or ambient light.
The BLS Constant-Sense technology ensures the light stays illuminated as long as motion is detected nearby, automatically turning off approximately 15 seconds after motion ceases.
Обслуживание
- Зарядка: When the light dims or stops responding, it indicates a low battery. Detach the light from its mounting, connect the provided USB cable to the charging port, and plug it into a USB power source. A red indicator light typically signifies charging, turning green or off when fully charged.
- Уборка: Wipe the light's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish or electronic components.
- Хранилище: If storing the lights for an extended period, ensure they are fully charged and stored in a cool, dry place. Recharge periodically to maintain battery health.
Charging Demonstration Video
Video: A demonstration on how to charge the BLS LED Closet Light using the provided USB cable. This video shows the charging port and indicator light behavior.
Battery Life Information Video
Video: This video highlights the 1500mAh rechargeable battery and its extended run time of up to 120 days, demonstrating the product's efficiency.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Свет не включается. | Низкий заряд батареи. Неправильная настройка режима. Insufficient darkness (in AUTO NIGHT mode). | Полностью зарядите светильник. Check the slide switch and ensure it's set to ON, AUTO NIGHT, or AUTO DAY & NIGHT. Test in a darker environment or switch to AUTO DAY & NIGHT mode. |
| Датчик движения не работает. | Неправильная настройка режима. Датчик заблокирован. Ambient light too bright (in AUTO NIGHT mode). | Ensure the switch is set to AUTO NIGHT or AUTO DAY & NIGHT. Удалите все препятствия с датчика. Test in a darker area or switch to AUTO DAY & NIGHT. |
| Light falls off mounting surface. | Adhesive not strong enough or surface not clean. Magnetic plates not properly secured. | Clean the surface thoroughly before applying adhesive. Use new 3M adhesive strips if necessary. Consider using screws for more permanent installation if the surface allows. |
| Короткое время работы батареи. | Частая активация. Continuous ON mode usage. Со временем аккумулятор деградирует. | Optimize mode setting (e.g., use AUTO NIGHT in dark areas). Avoid prolonged use in ON mode. Ensure full charge cycles. If battery life remains significantly short, contact support. |
Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | БСТ |
| Название модели | 36 LED Closet Lights (T36-3) |
| Цветовая температура | 5500K Дневной белый |
| Количество светодиодов | 36 |
| Яркость | 180 люмен |
| Источник питания | 1500mAh Rechargeable Lithium Ion Battery (included) |
| Ватtage | 3 Вт |
| Материал | Акрилонитрил-бутадиен-стирол, алюминий |
| Размеры продукта | 8.9"Д x 1.4"Ш x 0.6"В |
| Вес товара | 0.42 килограмма (14.8 унции) |
| Тип установки | Wall Mount / Under Cabinet (Magnetic with 3M adhesive) |
| Специальная характеристика | 3-way switching, Motion Sensor, Instant On |
| Метод контроля | Передвижной переключатель |
| Использование внутри и снаружи помещений | В помещении |
| Уровень водонепроницаемости | Waterproof (Note: Typically means splash-proof, not submersible) |
Информация о гарантии
BLS offers an 18-month warranty for this product. To register for your free extended warranty, please scan the QR code provided on the product packaging or contact customer support.
Поддержка клиентов
For any support needs, questions, or concerns regarding your BLS T36-3 LED Closet Light, please contact us via email:
