Введение
Thank you for choosing the BYGD 750W Car Power Inverter. This device converts 12V DC power from your vehicle's battery into 240V AC household power, allowing you to operate various electronic devices on the go. It also features two USB ports for charging smaller devices. Please read this manual thoroughly before use to ensure safe and efficient operation.
Информация по безопасности
- Не допускайте попадания воды, дождя или снега на инвертор.
- Не эксплуатируйте инвертор, если он подвергся сильному удару, упал или был поврежден каким-либо иным образом.
- Не разбирайте инвертор. Неправильная сборка может привести к поражению электрическим током или возгоранию.
- Чтобы снизить риск поражения электрическим током, перед выполнением любых работ по техническому обслуживанию или чистке отключайте инвертор от розетки.
- Не подпускайте детей к инвертору.
- Ensure proper ventilation around the inverter during operation to prevent overheating.
Продукт болееview
The BYGD 750W Car Power Inverter is designed for convenience and reliability. Familiarize yourself with its components:

Изображение: спереди и сзади view of the BYGD 750W Car Power Inverter, highlighting the positive terminal, negative terminal, cooling fan, replaceable fuse, 230V AC socket, switch indicator light, power button switch, power indicator light, and 2 USB ports.
- Положительный вывод: Подключается к положительному (+) выводу источника питания 12 В постоянного тока.
- Отрицательный вывод: Подключается к отрицательной (-) клемме источника питания 12 В постоянного тока.
- Охлаждающий вентилятор: Включается автоматически для отвода тепла во время работы.
- Сменный предохранитель: Обеспечивает защиту от сверхтоков.
- 230V AC Socket: For connecting AC-powered devices.
- Кнопка включения/выключения питания: Включает или выключает инвертор.
- Switch Indicator Light: Загорается, когда инвертор включен.
- Световой индикатор питания: Указывает на рабочее состояние.
- USB Ports (2.4A): Для зарядки устройств с питанием от USB.

Image: The BYGD 750W Power Inverter, user manual, three 30A replaceable fuses, and red and black battery clip cables (55cm).
Настраивать
Follow these steps to properly set up your BYGD Car Power Inverter:
- Подготовьте автомобиль: Ensure your vehicle's engine is off before connecting the inverter.
- Подключите зажимы аккумулятора: Attach the red battery clip cable to the positive (+) terminal of your vehicle's 12V battery and the black battery clip cable to the negative (-) terminal.
- Подключитесь к инвертору: Connect the other end of the red cable to the positive terminal of the inverter and the black cable to the negative terminal of the inverter. Ensure all connections are secure and tight.
- Размещение: Place the inverter in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure the cooling fan is not obstructed.
- Первоначальное включение: Once connected, press the power button on the inverter. The power indicator light should illuminate, indicating the inverter is ready for use.
Инструкция по эксплуатации
Operating your BYGD Car Power Inverter is straightforward:
- Включение питания: After successful setup, press the power button on the inverter. The indicator lights will confirm it is active.
- Подключите устройства переменного тока: Plug your 240V AC devices into the AC outlet on the inverter. Ensure the total power consumption of your devices does not exceed the inverter's continuous power rating of 750W (or 1500W peak).
- Подключите USB-устройства: Plug your USB-powered devices into the 2.4A USB charging ports.
- Использование монитора: Pay attention to the power indicator lights and any warning signals. If an alarm sounds or the inverter shuts down, refer to the troubleshooting section.
- Выключение: When finished, first disconnect all devices from the inverter, then press the power button to turn off the inverter. Finally, disconnect the inverter from the vehicle's battery.
Важное примечание: The inverter provides a modified sine wave output. While suitable for most electronic devices, some sensitive electronics or devices with AC motors may require a pure sine wave inverter for optimal performance.
Обслуживание
Регулярное техническое обслуживание обеспечивает долговечность и оптимальную производительность вашего инвертора:
- Уборка: Periodically clean the exterior of the inverter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Вентиляция: Убедитесь, что вентилятор охлаждения и вентиляционные отверстия свободны от пыли и мусора. Засорение вентиляционных отверстий может привести к перегреву.
- Замена предохранителя: The inverter is equipped with replaceable 30A fuses. If the inverter stops working due to an overload or short circuit, the fuse may need replacement.

Изображение: крупный план view of the BYGD 750W Car Power Inverter's rear panel, showing the three 30A replaceable fuses installed next to the battery terminals and cooling fan.
Чтобы заменить предохранитель:
- Disconnect the inverter from all power sources and devices.
- Carefully remove the fuse cover.
- Replace the blown fuse with a new 30A fuse of the same type.
- Securely replace the fuse cover.

Image: A diagram showing the internal cooling fan and the convection design for two-way heat dissipation within the BYGD 750W Car Power Inverter, ensuring efficient temperature regulation.
Поиск неисправностей
Если у вас возникли проблемы с инвертором, ознакомьтесь со следующими распространенными проблемами и решениями:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Нет выходной мощности | Плохие контакты, низкий уровень заряда батареи.tage, blown fuse, inverter off | Check all connections, charge vehicle battery, replace fuse, turn inverter on |
| Инвертор отключается. | Перегрузка, перегрев, низкое/высокое входное напряжениеtage | Reduce load, ensure proper ventilation, check battery voltage |
| Вентилятор не работает | Not enough heat generated to activate fan, fan malfunction | Fan activates automatically when needed. If inverter overheats and fan is off, contact support. |
| Устройство не заряжается через USB | USB cable issue, device not compatible, inverter off | Try a different USB cable/device, ensure inverter is on |
Функции защиты
The BYGD inverter is equipped with multiple protection mechanisms to ensure safety and extend its lifespan:

Image: A diagram showing the internal chip and various protection features of the BYGD Power Inverter, including low voltage защита, высокий объемtage protection, smarter circuit protection, and overload protection.
- Высокая громкостьtagЭлектронная защита: Выключается при превышении входной громкостиtagе превышает безопасные пределы.
- Низкая громкостьtagЭлектронная защита: Shuts down to prevent over-discharge of the vehicle battery.
- Защита от перегрузки: Shuts down if connected devices draw too much power.
- Защита от перегрева: Выключается, если внутренняя температура становится слишком высокой.
- Защита от сверхтока: Защищает от чрезмерного потребления тока.
- Защита от короткого замыкания: Защищает от коротких замыканий на выходе.
Технические характеристики
| Особенность | Спецификация |
|---|---|
| Бренд | БИГД |
| Номер модели | TUV750 |
| Непрерывная мощность | 750 Вт |
| Пиковая мощность | 1500 Вт |
| Vol входtage | 12 В постоянного тока |
| Выход Voltage | Переменный ток 240 В |
| Выходная частота | 50 Гц |
| Форма выходного сигнала | Модифицированная синусоида |
| USB-выход | 2 порта USB 2.4 А |
| Масса | 1.4 Килограмма |
| Размеры | 24.9 х 14.2 х 7.4 см |
| Встроенный предохранитель | 30А |
Гарантия и поддержка
BYGD products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BYGD webСохраните чек о покупке в качестве подтверждения покупки на случай предъявления гарантийных претензий.



