Руководство пользователя

1. Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Hanwha Techwin XNO-6120R/LPR 2MP Low Speed LPR Outdoor IR Network Bullet Camera. This camera is designed for specialized applications such as parking lots, drive-thrus, and entry gates, capable of accurately capturing license plates at speeds up to 35 MPH.

Ключевые особенности включают в себя:

• 2 Megapixel (1920 x 1080) Resolution: Provides clear, high-definition video.
• 12X Optical Zoom (5.2 ~ 62.4mm): Allows for detailed magnification of distant objects.
• H.265/H.264/MJPEG Codec Support: Эффективное сжатие видео для оптимизации хранилища и пропускной способности.
• Embedded LPR Solution: Integrated license plate recognition for low-speed applications.
• Расширенная видеоаналитика: Includes loitering, directional detection, fog detection, audio detection, digital auto tracking, sound classification, and tampобнаружение.
• High Powered IR LEDs: Provides readable length for LPR up to 65 ft in low-light conditions.
• Robust Environmental Protection: IP67/IP66, NEMA 4X, and IK10 ratings ensure durability in harsh outdoor environments.
• Широкий динамический диапазон (WDR): 150dB WDR for clear images in challenging lighting.

2. Информация по технике безопасности

Please read all safety instructions carefully before installing and operating the camera. Failure to comply with these instructions may result in injury or damage to the device.

• Источник питания: Use only the specified power supply (12VDC/24VAC/PoE). Incorrect voltagЭто может повредить камеру.
• Среда установки: Ensure the installation location is stable and can support the camera's weight. Avoid installing in areas with excessive vibration or direct exposure to corrosive substances.
• Вода и влага: Although the camera is IP67/IP66 rated for outdoor use, ensure all connections are properly sealed to prevent water ingress. Do not submerge the camera.
• Обслуживание: Не пытайтесь разбирать или ремонтировать камеру самостоятельно. Доверьте все работы по обслуживанию квалифицированному персоналу.
• Температура: The camera is designed to operate within -40°C ~ +55°C (-40°F ~ +131°F). Ensure the operating environment stays within this range.

3. Содержимое упаковки

Убедитесь, что в упаковке присутствуют все компоненты:

• Hanwha Techwin XNO-6120R/LPR Camera Unit
• Backbox (included)
• Installation Guide / Quick Start Guide (not provided in this manual, but typically included)
• Крепежные элементы (винты, дюбели — конкретные типы могут отличаться)
• Waterproof RJ45 Connector Kit (if applicable)

Note: The package contents may vary slightly depending on the region or specific bundle.

4. Продукт закончилсяview

The XNO-6120R/LPR is a bullet-style network camera. Familiarize yourself with its main components:

Рисунок 4.1: Передний угол view of the Hanwha Techwin XNO-6120R/LPR bullet camera. This image shows the main lens, the IR illuminators around the lens, and the integrated sun shield. The camera body is dark gray with "WISENET" branding on the side.

Рисунок 4.2: Сторона view of the Hanwha Techwin XNO-6120R/LPR bullet camera, illustrating the adjustable mounting bracket and the base plate with screw holes for installation. The camera's cylindrical body extends from the base.

• Объектив: 12X optical zoom lens (5.2mm ~ 62.4mm) with auto-focus.
• ИК светодиоды: High-powered infrared illuminators for night vision and LPR.
• Жилье: Weatherproof (IP67/IP66) and vandal-resistant (IK10) bullet housing.
• Монтажный кронштейн: Adjustable bracket for precise positioning.
• Cable Gland/RJ45 Connection: Located at the rear for network and power connections.
• USB-порт: For easy installation and maintenance.
• SD Card Slots: Dual SD card slots for local storage.

5. Настройка

5.1. Физическая установка и монтаж

1. Выберите местоположение: Select a suitable outdoor location that provides the desired field of view for LPR, ensuring it is within range of power and network connections. Consider the camera's operating temperature range.
2. Подготовка монтажной поверхности: Use the included backbox as a template to mark drilling points on the mounting surface. Ensure the surface is strong enough to support the camera.
3. Secure the Backbox: Attach the backbox securely to the mounting surface using appropriate screws and anchors.
4. Attach Camera to Backbox: Connect the camera unit to the backbox, ensuring proper alignment and secure fastening.
5. Отрегулируйте угол: Loosen the adjustment screws on the mounting bracket to set the desired camera angle and field of view. Tighten screws once adjusted.

5.2. Проводка и соединения

The XNO-6120R/LPR supports Power over Ethernet (PoE), 12VDC, or 24VAC power inputs.

1. Подключение к сети: Connect an RJ45 Ethernet cable from your network switch (preferably PoE-enabled) to the camera's RJ45 port. Ensure the connection is secure and waterproof using the provided kit if necessary.
   

   Рисунок 5.2.1: Example of an RJ45 Ethernet cable, used for network and PoE connection to the camera.
2. Подключение питания (если не используется PoE): If not using PoE, connect a 12VDC or 24VAC power adapter to the camera's power input terminal. Refer to the camera's wiring diagram for correct polarity.
3. Установка SD-карты: If local storage is desired, insert compatible SD cards into the dual SD card slots.

5.3. Первоначальная настройка

После физической установки и подключения получите доступ к камере. web интерфейс для первоначальной настройки.

1. Откройте для себя камеру: Use the Hanwha Techwin Device Manager software (available on the Hanwha Techwin website) to discover the camera on your network. The camera will typically obtain an IP address via DHCP.
2. Доступ Web Интерфейс: Откройте web Введите IP-адрес камеры в браузере.
3. Авторизоваться: Enter the default username and password (refer to the quick start guide or Hanwha Techwin documentation for defaults, and change immediately for security).
4. Настройки сети: Configure static IP address, subnet mask, gateway, and DNS settings if required for your network.
5. Дата и время: Set the correct date, time, and time zone. Configure NTP synchronization for accuracy.
6. Обновление прошивки: Check for and install the latest firmware version from the Hanwha Techwin webсайта для обеспечения оптимальной производительности и безопасности.

6. Операционная

6.1. Жить View и основные элементы управления

Once configured, you can access the camera's live view через его web interface or a compatible VMS (Video Management System).

• Прямая трансляция: View Видеотрансляция в реальном времени.
• Управление масштабированием: Use the digital zoom controls in the interface to adjust the 12X optical zoom.
• Регулировка фокуса: The camera features auto-focus. Manual adjustments can be made via the web интерфейс, если необходимо.
• Настройки изображения: Adjust brightness, contrast, saturation, sharpness, WDR, and day/night mode settings to optimize image quality for specific lighting conditions.

6.2. LPR (License Plate Recognition) Configuration

The XNO-6120R/LPR features an embedded LPR solution. Proper configuration is crucial for accurate plate recognition.

1. Access LPR Settings: Navigate to the LPR/Analytics section in the camera's web интерфейс.
2. Define Detection Zone: Draw a detection zone that covers the area where license plates are expected to appear. Ensure the zone is optimized for the camera's field of view and the expected vehicle speed (up to 35 MPH).
3. Set Recognition Parameters: Configure parameters such as minimum/maximum plate size, angle tolerance, and character set.
4. Действия по событию: Define actions to be taken upon plate recognition, such as sending metadata to a VMS, triggering an alarm, or logging data.
5. Тестирование: Conduct thorough testing with various vehicles and lighting conditions to verify LPR accuracy.

6.3. Advanced Video Analytics

The camera supports various intelligent video analytics:

• Loitering Detection: Detects objects remaining in a defined area for too long.
• Directional Detection: Triggers an event when an object moves in a specified direction.
• Fog Detection: Improves image clarity in foggy conditions and can trigger alerts.
• Обнаружение звука: Triggers events based on sound levels or specific sound classifications.
• TampОбнаружение эрингов: Alerts if the camera is obstructed, moved, or spray-painted.

Configure these analytics in the camera's web interface under the "Event" or "Analytics" sections, defining detection zones, sensitivity, and associated actions.

6.4. Запись и воспроизведение

Record video to local SD cards, a Network Video Recorder (NVR), or a compatible VMS.

• График записи: Set up continuous recording, event-triggered recording (e.g., by LPR or motion detection), or scheduled recording.
• Конфигурация хранилища: Format SD cards via the web interface. Configure network storage (NAS/NVR) settings.
• Воспроизведение: Доступ к записанному footage through the camera's web interface (for SD card recordings) or your NVR/VMS for network recordings. Use date/time filters and event logs to locate specific incidents.

7. Техническое обслуживание

7.1. Уборка

Regular cleaning helps maintain optimal image quality and extends the camera's lifespan.

• Lens and Housing: Gently wipe the lens and camera housing with a soft, clean, lint-free cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical lenses.
• Избегать: Do not use strong detergents, solvents, or abrasive materials, as these can damage the lens coating or housing finish.
• Частота: Clean as needed, especially in dusty or high-traffic environments.

7.2. Обновления прошивки

Periodically check the Hanwha Techwin website for new firmware versions. Firmware updates often include bug fixes, performance improvements, and new features.

1. Скачать прошивку: Загрузите последнюю версию прошивки file for your specific model (XNO-6120R/LPR) from the official Hanwha Techwin support page.
2. Доступ к камере: Войти в камеру web интерфейс.
3. Процесс обновления: Navigate to the "System" or "Maintenance" section and locate the firmware update option. Follow the on-screen instructions to upload and install the firmware.
4. Не перебивайте: Do not power off the camera or disconnect the network during the firmware update process, as this can brick the device.

7.3. Экологические соображения

Ensure the camera's operating environment remains within specified limits to prevent damage and ensure longevity.

• Температура: Verify that the ambient temperature stays between -40°C ~ +55°C (-40°F ~ +131°F). The built-in heater assists in cold conditions.
• Влажность: Maintain humidity levels within the camera's specified operating range.
• Вибрация: Minimize exposure to excessive vibration, which can affect image stability and component lifespan.

8. Поиск Неисправностей

This section addresses common issues you might encounter with the XNO-6120R/LPR camera.

9. Технические характеристики

10. Гарантия и поддержка

For warranty information, please refer to the official Hanwha Techwin warranty policy available on their webна сайте или обратитесь к авторизованному дилеру. Сохраните чек о покупке для предъявления гарантийных претензий.

For technical support, product documentation, and software downloads, visit the official Hanwha Techwin support website. You may also contact their customer service or your local distributor for assistance.

Примечание: Конкретные условия гарантии и доступность технической поддержки могут различаться в зависимости от региона.