Введение
The Walrus Audio MAKO Series ACS1 is an advanced amp and cab simulator pedal designed to provide a wide range of classic amplifier tones and cabinet simulations directly to your sound system or recording interface. This manual will guide you through the features, setup, operation, and maintenance of your ACS1 pedal.
Рисунок 1: Передний view of the Walrus Audio MAKO Series ACS1 pedal, showcasing its control knobs and footswitches.
Настраивать
Требования к питанию
The ACS1 requires a standard 9VDC power supply with a minimum of 300mA, center-negative polarity. Ensure your power supply meets these specifications to prevent damage to the unit.
Рисунок 2: Задний view of the ACS1 showing the 9VDC power input, USB port, headphone jack, and mono/stereo outputs.
Связи
- Input (Mono/Stereo): Connect your instrument or the output of other pedals to the input jack(s). For mono operation, use the MONO IN jack. For stereo, use both STEREO IN and MONO IN.
- Output (Mono/Stereo): Connect the ACS1 to your amplifier, mixer, or audio interface. For mono output, use the MONO OUT jack. For stereo, use both MONO OUT and STEREO OUT.
- Выход для наушников: A dedicated 3.5mm stereo jack for silent practice.
- USB-порт: Used for firmware updates and loading custom Impulse Responses (IRs) via a computer.
- MIDI IN/THRU: For external MIDI control of the pedal's functions and presets.
Рисунок 3: Input jacks (Mono and Stereo).
Рисунок 4: MIDI IN and THRU ports.
Инструкция по эксплуатации
Контролируетview
The ACS1 features a comprehensive set of controls to shape your tone.
Рисунок 5: Подробный view of the ACS1 control panel.
- БАСЫ, СРЕДНИЕ, ВЫСОКИЕ ЧАСТОТЫ: Three-band EQ controls to adjust the low, mid, and high frequencies of your tone.
- ОБЪЕМ: Управляет общей выходной громкостью педали.
- ПРИРОСТ: Adjusts the amount of overdrive and distortion, simulating the gain stagе из ampпожизненнее.
- КОМНАТА: Controls the amount of simulated room reverb, from a dry, isolated sound to a large studio environment.
- AMP Toggle Switch (Fullerton, London, Dartford): Selects one of three iconic ampЛифтерные модели.
- Фуллертон: Inspired by classic American clean amps.
- Лондон: Based on British rock ampспасатели.
- Дартфорд: Emulates a chimey, British-voiced amp.
- CAB Toggle Switch (A, B, C): Selects one of three cabinet impulse responses (IRs). These can be customized via USB.
- L+R Toggle Switch: Determines how the amp and cab models are applied in stereo.
- L: Applies the selected amp/cab to the left channel only.
- R: Applies the selected amp/cab to the right channel only.
- +: Applies the selected amp/cab to both left and right channels.
- Ножной переключатель BYPASS: Включает/выключает эффект.
- Ножной переключатель BOOST: Activates a preset boost in volume and/or gain.
- Кнопка PRESET: Cycles through onboard presets. The ACS1 stores 3 onboard presets (128 via MIDI).
Сохранение предустановок
To save a preset, adjust the controls to your desired settings. Press and hold the PRESET button until the LED flashes, indicating the preset has been saved.
Стерео Операция
The ACS1 allows for flexible stereo routing. You can run the same amp model through both channels or assign different amp models to each channel using the L+R toggle switch and separate settings for each side.
Обслуживание
Уборка
To clean the pedal, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.
Обновления прошивки
Walrus Audio periodically releases firmware updates to enhance features and improve performance. Connect the ACS1 to your computer via the USB port and visit the Walrus Audio website for instructions and software to perform updates. Keeping your firmware updated ensures optimal performance and access to the latest features.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Звук не выводится. | Incorrect power supply, incorrect cable connections, pedal in bypass mode, volume knob set to zero. |
|
| Искаженный или нежелательный шум. | Excessive GAIN setting, incompatible power supply, ground loop. |
|
| Pedal not responding to MIDI. | Incorrect MIDI cable connection, incorrect MIDI channel, MIDI settings not configured. |
|
Технические характеристики
- Модель: ACS1
- Номер модели товара: 900-1057
- Бренд: Морж Аудио
- Требования к питанию: 9VDC, 300mA, Center-Negative
- Размеры: 570.87 x 452.76 x 295.28 inches (Note: This dimension seems unusually large for a pedal and might be a packaging dimension. Refer to manufacturer's official product page for exact pedal dimensions.)
- Вес товара: 0.018 ounces (Note: This weight seems unusually low for a pedal and might be an error. Refer to manufacturer's official product page for exact pedal weight.)
- Связь: Mono/Stereo Input, Mono/Stereo Output, Headphone Output, USB, MIDI IN/THRU
- Функции: 3 Amp Models, 3 Cab IRs (expandable), 3 Onboard Presets (128 via MIDI), 3-Band EQ, Room Reverb, Boost Function.
Гарантия и поддержка
For warranty information, technical support, or further assistance with your Walrus Audio MAKO Series ACS1, please visit the official Walrus Audio webили обратитесь в службу поддержки напрямую. Сохраните чек на случай предъявления гарантийных претензий.
