Введение
The MOBI Smart Home 2.4GHz WiFi Water Leak Sensor provides reliable 24/7 monitoring to protect your property from potential water damage. This device detects water leaks using its sensitive probes and sends real-time notifications directly to your smartphone via the MOBI Smart App. Designed for easy setup and use, it helps prevent costly damage from leaks in basements, near washing machines, hot water tanks, and other vulnerable areas. No hub or subscription is required for operation.
Image: Three MOBI Smart Water Leak Sensors and the accompanying mobile application interface.
Что в коробке?
Each MOBI Smart Home Water Leak Sensor package includes the following components:
- 1 x Smart Alert Sensor
- 1 x Detector Extension Cable (extends up to 48 inches)
- 2 x AAA Alkaline Batteries (pre-installed or included separately)
- 1 х двусторонняя лента
- 2 x крепежных винтов
Руководство по настройке
1. Установка аккумулятора
The sensor requires 2 AAA batteries for operation. Ensure they are correctly inserted according to the polarity markings inside the battery compartment. The included batteries are designed to last up to 2 years.
2. Установка приложения и сопряжение
- Загрузить MOBI Smart App из магазина приложений вашего смартфона (iOS или Android).
- Откройте приложение и создайте учетную запись или войдите в систему.
- Follow the in-app instructions to add a new device. Select the Water Leak Sensor from the list of available devices.
- Убедитесь, что ваш смартфон подключен к 2.4GHz Wi-Fi сеть. The sensor is compatible only with 2.4GHz networks.
- The app will guide you through the pairing process, which typically involves putting the sensor into pairing mode (refer to the sensor's LED indicator for status).
Image: Sensor with power adapter, highlighting 2.4GHz Wi-Fi connection.
3. Размещение датчика
Strategically place the sensor in areas prone to water leaks. The detector probes are designed to detect even small amounts of liquid. Use the included double-sided tape or mounting screws to secure the main unit, and position the probe at the lowest point where water might accumulate.
- Подвалы: Near sump pumps, water heaters, or foundation walls.
- Прачечные: Behind or next to washing machines.
- Ванные комнаты: Under sinks, near toilets, or bathtubs.
- Кухни: Under sinks, near dishwashers or refrigerators with water lines.
- Utility Rooms: Near hot water tanks, pipes, or HVAC units.
The 48-inch extension cable provides flexibility for reaching tight spaces or placing the main unit in a more accessible location while the probe remains at the detection point.
Image: Sensor probe with extended cable for flexible positioning near a water heater.
Image: Sensor placed near a washing machine to detect leaks.
Инструкция по эксплуатации
Real-Time Leak Detection and Alerts
Once set up, the MOBI Smart Water Leak Sensor continuously monitors for the presence of water. When the sensor probes detect liquid, it immediately triggers an alert. This alert is sent as a real-time notification to your smartphone via the MOBI Smart App, allowing you to respond quickly to potential water damage.
Image: Real-time alert system showing a water leak notification on the app.
App Features and Remote Monitoring
The MOBI Smart App serves as your central control and monitoring hub. You can view the status of all connected water leak sensors, review historical data, and manage settings. The app allows for remote monitoring, meaning you receive alerts and can check sensor status from anywhere with an internet connection.
- Настройки уведомлений: Customize how you receive alerts.
- Журнал истории: Review past leak events and sensor activity.
- Уведомление о низком заряде батареи: The app will alert you when the sensor's battery is low, ensuring continuous protection.
- расширяемость: The system supports connecting over 100 sensors, allowing comprehensive coverage for large properties.
Image: MOBI Smart App showing connectivity to multiple water leak sensors.
Видео: Оверview of the MOBI Smart WiFi Water Leak Sensor, demonstrating its ease of use and alert features.
Обслуживание
Замена батареи
The sensor is powered by 2 AAA Alkaline batteries, which typically last up to 2 years. When the battery level is low, you will receive a notification through the MOBI Smart App. To replace the batteries:
- Carefully open the battery compartment on the back of the sensor unit.
- Извлеките старые батарейки типа ААА.
- Insert new AAA Alkaline batteries, ensuring correct polarity.
- Надежно закройте батарейный отсек.
Уборка
To ensure optimal performance, periodically clean the sensor probes and the main unit with a soft, dry cloth. Avoid using abrasive cleaners or submerging the unit in water.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Уведомления не получены. | App logged out, Wi-Fi disconnected, low battery, app notification settings disabled. | Log back into the MOBI Smart App. Check Wi-Fi connection. Replace batteries. Enable notifications for the MOBI Smart App in your phone's settings. |
| Датчик не подключается к Wi-Fi. | Incorrect Wi-Fi band (not 2.4GHz), weak signal, incorrect password. | Ensure your router is broadcasting a 2.4GHz network and your phone is connected to it during setup. Move the sensor closer to the router. Double-check Wi-Fi password. |
| Sensor beeping but no app notification. | App connectivity issue, phone not connected to internet, app not running in background. | Verify your phone's internet connection. Ensure the MOBI Smart App is running and has background refresh enabled. Check app login status. |
| Короткое время работы батареи. | Using non-Alkaline batteries, frequent alerts in a high-humidity environment. | Use only high-quality AAA Alkaline batteries. Ensure the sensor is not constantly exposed to moisture that triggers false alerts. |
For further assistance, please refer to the help section within the MOBI Smart App or contact MOBI customer support.
Технические характеристики
| Особенность | Деталь |
|---|---|
| Номер модели | 700062 |
| Источник питания | Battery Powered (2 x AAA Alkaline batteries) |
| Томtage | 3 Вольт (постоянный ток) |
| Метод контроля | App (MOBI Smart App) |
| Связность | Wi-Fi 2.4 ГГц |
| Сенсорная техника | Контактный датчик |
| Detector Cable Length | Up to 48 inches (approx. 122 cm) |
| Тип крепления | Attaches to surfaces with tape or screws |
| Размеры продукта | 3.8 дюймов (Д) x 1.8 дюйма (Ш) x 6.1 дюйма (В) (прибл. 9.65 x 4.57 x 15.5 см) |
| Вес товара | 1.15 фунта (приблизительно 0.52 кг) |
Гарантия и поддержка
For information regarding product warranty, returns, or technical support, please refer to the official MOBI website or contact MOBI customer service directly. Details can typically be found on the product packaging or within the MOBI Smart App's support section.
Вы можете посетить MOBI Store on Amazon для получения дополнительной информации и информации о продуктах.
