Введение
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Vortex Optics Viper 6.5-20x44 Deadhold-BDC (MOA) Riflescope. Designed for long-range, predator/varmint, and target applications, this riflescope features premium optics and robust construction to ensure reliable performance in various conditions.
Figure 1: The Vortex Viper 6.5-20x44 Deadhold-BDC (MOA) Riflescope, showcasing its sleek black finish and objective lens.
Основные характеристики
- Оптическая система: Premium, fully multi-coated, extra-low dispersion lenses for excellent resolution and color fidelity. XR coatings enhance light gathering capability.
- Строительство: Built on a 30mm main tube with a hard anodized finish, providing a rugged and tough riflescope.
- Защита линз: Armortek coating protects the lenses from scratches, oil, and dirt.
- Башни: Capped reset turrets allow quick re-indexing to zero after sighting in.
- Регулировка параллакса: Side knob parallax adjust for quick and easy adjustments with visible range numbers.
- Окуляр: Fast focus eyepiece for quick and easy reticle focusing.
- Magnification Control: MAG-Bar allows rapid, easy changes in magnification.
- Устойчивость к атмосферным воздействиям: O-ring sealed and argon purged for fogproof and waterproof performance.
- Оптический прицел: Dead-Hold BDC (MOA) reticle, ideal for hunting or shooting at varying ranges where estimating hold-over is a concern. Second Focal Plane design.
Рисунок 2: Сзади view of the riflescope, highlighting the magnification adjustment ring and eyepiece.
Настраивать
Установка оптического прицела
The Vortex Viper riflescope is designed for a Weaver Mount system. Ensure proper mounting to your rifle using compatible rings and bases. Securely fasten the riflescope to prevent movement during recoil, which can affect accuracy.
Первоначальные корректировки
- Фокусировка окуляра: Adjust the fast focus eyepiece until the reticle appears sharp and clear. This is crucial for accurate aiming.
- Увеличение: Use the MAG-Bar on the magnification adjustment ring to set your desired power. The range is from 6.5x to 20x.
- Регулировка параллакса: Rotate the side knob parallax adjust to eliminate parallax error at your target distance. Range numbers are visible for reference.
Figure 3: Diagram of key components of the riflescope, including the Fast Focus Eyepiece, MAG-Bar, Elevation Turret, Side Focus Dial, Reticle Focus, Magnification Adjustment Ring, Windage Turret, and Objective Lens.
Эксплуатация прицела
Регулировка высоты и ветра
The riflescope features capped reset turrets for precise adjustments. Each click of the turret represents 1/4 MOA (Minute of Angle) of adjustment. To make adjustments:
- Remove the turret cap.
- Pull up the turret knob to disengage the locking mechanism.
- Rotate the knob to make the desired adjustments. The clicks are tactile and audible for precise control.
- Once adjustments are made, push the turret knob down to lock it in place.
- To re-index the turret to zero after sighting in, pull up the turret knob, rotate it until the '0' aligns with the indicator mark, and then push it back down.
Рисунок 4: Подробная информация view of the elevation and windage turrets, showing the pull-up mechanism for adjustment and zero-reset.
Dead-Hold BDC (MOA) Reticle
The Dead-Hold BDC (MOA) reticle is a Second Focal Plane (SFP) reticle. This means the reticle's size appears constant regardless of the magnification setting. The hashmarks on the reticle provide quick reference points for bullet drop compensation (BDC) and windage corrections at various distances.
To effectively use the BDC reticle, it is recommended to:
- Familiarize yourself with your specific ammunition's ballistic data.
- Practice at various ranges to understand the holdover points for your setup.
- Use the provided reticle manual (if applicable) or online ballistic calculators from Vortex to determine precise holdover values for different distances and environmental conditions.
Figure 5: Diagram of the Dead-Hold BDC (MOA) reticle, showing the main crosshairs and the bullet drop compensation hashmarks below the center.
Обслуживание
Чистка линз
For best optical performance, keep the lenses clean. Use a soft brush or compressed air to remove loose debris. For smudges or fingerprints, use a clean microfiber cloth and a lens cleaning solution. Avoid using harsh chemicals or abrasive materials.
Очищение тела
Протрите корпус оптического прицела мягкой тряпкой.amp cloth. For stubborn dirt, a mild soap solution can be used. Ensure all moisture is wiped away before storage.
Хранилище
Store the riflescope in a cool, dry place. If storing for extended periods, consider using a desiccant pack to absorb moisture. Always replace lens caps to protect the optics.
Поиск неисправностей
Если у вас возникли проблемы с прицелом, рассмотрите следующие распространенные решения:
- Размытое изображение:
- Adjust the fast focus eyepiece for reticle clarity.
- Adjust the side parallax knob for target clarity at different distances.
- Ensure lenses are clean and free of debris or smudges.
- Inaccurate Shots/Zero Shift:
- Verify that the riflescope is securely mounted to the rifle. Loose mounts are a common cause of inaccuracy.
- Ensure turret knobs are fully pushed down and locked after adjustments.
- Check for any physical damage to the riflescope or rifle.
- Запотевание:
- Internal fogging is rare due to argon purging. If it occurs, contact Vortex support.
- External fogging can be wiped away with a clean cloth.
В случае возникновения постоянных проблем, контактную информацию можно найти в разделе «Гарантия и поддержка».
Технические характеристики
| Атрибут | Ценить |
|---|---|
| Бренд | Вихрь |
| Название модели | Vortex Optics Viper 6.5-20x44 PA SFP Riflescope - Dead-Hold BDC MOA Reticle |
| Номер модели | VPR-M-05BDC |
| СКП | 875874001213 |
| Увеличение (минимальное) | 6.5x |
| Увеличение (максимальное) | 20x |
| Диаметр объектива | 44 миллиметра |
| Тип сетки | Dead-Hold BDC MOA |
| фокальная плоскость | Вторая фокальная плоскость (SFP) |
| Зрачка | 3.1 дюйма |
| Поле View | 17.4 футов |
| Вес товара | 2 фунта |
| Материал | Алюминий |
| Цвет | Черный |
| Тип крепления | Крепление Weaver |
| Страна происхождения | Соединенные Штаты |
Гарантия и поддержка
Your Vortex Optics Viper Riflescope is covered by an Unlimited, Unconditional Lifetime Warranty. This means that if your product ever becomes damaged or defective, Vortex will repair or replace it at no charge to you. This warranty is fully transferable and does not require a receipt or registration.
Для гарантийного обслуживания или технической поддержки, пожалуйста, свяжитесь напрямую с компанией Vortex Optics через их официальный контакт. website or customer service channels. They are committed to standing behind their products and ensuring customer satisfaction.
