One Control OC10W

One Control Crocodile Tail Loop Wing (OC10W) User Manual

Model: OC10W | Brand: One Control

1. Продукт закончилсяview

The One Control Crocodile Tail Loop Wing (OC10W) is an advanced programmable 10-channel loop switcher designed to optimize your guitar effects setup. It integrates user feedback and technical advancements to provide flexible signal routing, comprehensive MIDI control, and convenient remote programming via Bluetooth.

Передний view of the One Control Crocodile Tail Loop Wing (OC10W)

Рисунок 1: Передняя часть view of the One Control Crocodile Tail Loop Wing (OC10W), showing the display, footswitches, and input/output jacks.

2. Руководство по установке

2.1. Подключение питания

Connect a standard 9V DC power supply (not included) to the 9V DC input jack on the rear panel of the OC10W. Ensure the power supply meets the required specifications (9V, 150mA minimum).

2.2. Аудиоподключения

  1. Connect your guitar or instrument to the ВХОД Джек.
  2. Подключите OUT1 or OUT2 Джек к твоему ampвклад лифера.
  3. For each effect pedal, connect the pedal's input to a ОТПРАВЛЯТЬ jack (e.g., SEND1) and the pedal's output to the corresponding ВОЗВРАЩАТЬСЯ jack (e.g., RETURN1). The OC10W features seven serial mono loops (SEND1-7/RETURN1-7) and three parallel loops (SEND8-10/RETURN8-10).
  4. The ТЮНЕР output can be connected to a dedicated tuner pedal. This output features a mute switch for silent tuning.
Задний view of the One Control Crocodile Tail Loop Wing (OC10W) showing all input/output jacks

Рисунок 2: Сзади view of the OC10W, illustrating the various input, output, send, and return jacks for audio connections.

2.3. MIDI-подключения

Use standard MIDI cables to connect the MIDI ВХОД и MIDI-ВЫХОД jacks to other MIDI-compatible devices for comprehensive control and synchronization.

2.4. Bluetooth Pairing (Winglink App)

The OC10W can be controlled and programmed remotely via the Winglink iOS app. Ensure Bluetooth is enabled on your iOS device and follow the app's instructions to pair with the OC10W. Look for the Winglink logo on the device.

Close-up of the Winglink logo and a footswitch on the OC10W

Figure 3: Close-up of the Winglink logo, indicating Bluetooth connectivity for the iOS app.

3. Операция

3.1 Режимы работы

The OC10W supports two primary modes of operation:

  • Программный режим: Allows you to store and recall complex effect pedal combinations and MIDI commands as presets. The OC10W offers 168 MIDI presets.
  • Ручной режим: Enables direct control over individual loops via the footswitches, allowing you to turn effects on and off instantly without recalling a preset.

3.2. Функции ножного переключателя

The OC10W features multiple footswitches for versatile control:

  • PROGRAM / LOOP Footswitches (1-7): In Program Mode, these recall specific presets. In Manual Mode, they activate/deactivate the corresponding effect loops.
  • BANK+ / LOOP8 Footswitch: Used to increment banks in Program Mode or control Loop 8 in Manual Mode.
  • MUTE / LOOP9 Footswitch: Mutes the output for silent tuning or controls Loop 9.
  • FS3 / MULTI JACK Footswitch: Controls external devices via the FS3 jack or acts as a multi-function switch.
  • FS1, FS2, SLV: Additional footswitches for various control functions, often configurable.
Close-up of the footswitch section on the OC10W

Рисунок 4: Крупный план view of the OC10W's footswitch section, including the main program/loop switches and control switches.

3.3. Дисплей и индикаторы

The central display shows the current bank/index, program number, or custom name. LED indicators provide visual feedback on active loops, MIDI status, and other functions.

Close-up of the digital display on the OC10W

Figure 5: Close-up of the OC10W's digital display, showing a typical preset indication.

4. Техническое обслуживание

To ensure the longevity and optimal performance of your One Control Crocodile Tail Loop Wing, follow these maintenance guidelines:

  • Уборка: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
  • Хранилище: Храните устройство в прохладном, сухом месте, вдали от прямых солнечных лучей, экстремальных температур и высокой влажности.
  • Соединения: Periodically check all cable connections (audio, MIDI, power) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
  • Ножные переключатели: While designed for durability, avoid excessive force when operating the footswitches.

5. Поиск Неисправностей

If you encounter issues with your OC10W, refer to the following common problems and solutions:

ПроблемаВозможная причинаРешение
Нет питания/Устройство не включаетсяIncorrect power supply; Loose power connection; Faulty power supplyEnsure a 9V DC power supply is correctly connected. Verify power supply functionality.
No sound/Signal lossIncorrect audio connections; Faulty cables; Loop not active; Tuner mute engagedCheck all input, output, send, and return cables. Ensure the correct loops are active. Disengage tuner mute if active.
MIDI-управление не работает.Incorrect MIDI connections; MIDI channel mismatch; Incorrect MIDI settingsVerify MIDI In/Out connections. Ensure MIDI channels match between devices. Check MIDI settings in the OC10W and connected devices.
Проблемы с подключением BluetoothBluetooth off on device; App issues; InterferenceEnsure Bluetooth is enabled on your iOS device. Restart the Winglink app and the OC10W. Try pairing again.

6. Технические характеристики

ОсобенностьСпецификация
МодельCrocodile Tail Loop Wing (OC10W)
Тип эффектаProgrammable 10-Channel Loop Switcher
Петли7x Serial Mono Loops, 3x Parallel Loops
Buffer CircuitBJF Buffer (switchable)
Тип обходаTrue Bypass (when buffer is off)
Предустановки168 MIDI Presets
КонтрольFootswitches, Full MIDI Control, Bluetooth (Winglink iOS app)
Дополнительные возможностиTuner Out with Mute Switch, 3x FS Connectors (TRS), 8-pin DIN plug
Источник питанияПроводной электрический
Томtage9 Вольт
Ampярость150 миллиamps
Размеры (Д x Ш x В)46.5 х 12 х 8.5 см
Вес товара1.6 кг
аппаратный интерфейсBluetooth
Формат сигналаАналоговый

7. Гарантия и поддержка

One Control products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact One Control customer service or visit their official webсайт. Пожалуйста, сохраните доказательство покупки для гарантийных претензий.

Производитель: One Control

Связанные документы - OC10W

Предварительноview Руководство пользователя петли «Хвост крокодила» для управления
Руководство пользователя для One Control Crocodile Tail Loop, флагманского программируемого педального переключателя с поддержкой MIDI и встроенным буфером BJF.
Предварительноview Руководство пользователя One Control Chamaeleo Tail Loop MK2
Руководство пользователя для One Control Chamaeleo Tail Loop MK2, программируемого переключателя гитарных эффектов с 5 петлями, буфером и интуитивно понятным управлением.
Предварительноview Руководство пользователя One Control Caiman Tail Loop
Руководство пользователя для One Control Caiman Tail Loop, MIDI-контроллера на 150 пресетов с 5-канальным/5-канальным контроллером и переключателем темпа Tap Tempo. Подробно описаны функции, характеристики передней и задней панелей, иерархия PGM, настройки ножного переключателя и MIDI, параметры инициализации и технические характеристики.
Предварительноview Agamidae Tail Loop User Manual
User manual for the One Control Agamidae Tail Loop, detailing its features, operation, and technical specifications for managing guitar effects pedals.
Предварительноview Gebruikershandleiding Chamaeleo Tail Loop MKIII - One Control
Подробные инструкции по эксплуатации One Control Chamaeleo Tail Loop MKIII — компактный 5-программный переключатель шлейфов с 4 последовательными шлейфами, 1 отдельным шлейфом, выходом Mute/Tuner Out и буфером BJF для эффективной маршрутизации сигнала.
Предварительноview Руководство пользователя One Control Minimal Series Black Loop с буфером BJF
Руководство пользователя для минималистской серии One Control Black Loop с буфером BJF, подробно описывающее его характеристики как универсального коммутатора и буфера, технические характеристики и рекомендации по эксплуатации.