1. Введение
Thank you for choosing the Philips GoZero Soda Machine. This device allows you to create refreshing sparkling water at home with ease. Please read this manual carefully before first use and keep it for future reference. This machine operates without electricity, offering convenience and portability.
Image 1.1: Philips GoZero Soda Machine (Black)
2. Информация по технике безопасности
Ваша безопасность превыше всего. Пожалуйста, соблюдайте следующие меры предосторожности:
- Do not carbonate anything other than plain water. Carbonating other liquids can cause excessive pressure and result in injury.
- Always ensure the bottle is securely twisted into place before carbonating.
- Do not remove the bottle during carbonation.
- The integrated safety relief valve will automatically release pressure if it becomes too high. A buzzing sound indicates this normal operation.
- Keep the machine and CO2 cylinder away from heat sources and direct sunlight.
- Use only Philips GoZero or compatible CO2 cylinders and BPA-free bottles designed for this machine.
- Do not use damaged bottles. Inspect bottles for cracks or damage before each use.
- Данный прибор не предназначен для использования лицами (включая детей) с ограниченными физическими, сенсорными или умственными способностями или с недостатком опыта и знаний, если они не находятся под присмотром или не получили инструкции по использованию прибора от лица, ответственного за их безопасность.
3. Содержимое упаковки
Проверьте наличие всех предметов в посылке:
- Philips GoZero Soda Machine
- 1-Liter BPA-Free PET Bottle
- 425g CO2 Cylinder (may be sold separately in some regions)
Image 3.1: Philips GoZero Soda Machine Packaging
4. Настройка
4.1 Installing the CO2 Cylinder
- Place the soda machine on a flat, stable surface.
- Remove the back cover of the machine by gently pulling it outwards.
- Unscrew the protective cap from the CO2 cylinder.
- Insert the CO2 cylinder into the back compartment of the machine. Screw it clockwise until it is firmly secured. Do not overtighten.
- Установите заднюю крышку на место, убедившись, что она защелкнулась.
Image 4.1: CO2 Cylinder
4.2 Preparing the Water Bottle
- Fill the 1-liter BPA-free PET bottle with cold tap water up to the fill line. Do not overfill.
- Ensure the bottle is clean and free from any foreign objects.
Image 4.2: 1-Liter BPA-Free Bottle
5. Инструкция по эксплуатации
5.1 Making Sparkling Water
Follow these three simple steps to create sparkling water:
- Крутить: Place the filled water bottle into the machine's bottle holder. Twist the bottle clockwise until it is securely locked into position.
- Нажимать: Press the carbonation button firmly for 2-3 seconds. You will hear a buzzing sound as the CO2 is released into the water. Release the button.
- Repeat (for desired carbonation): For more bubbles, repeat the pressing action. Typically, 3-5 presses are sufficient for a good level of carbonation. The safety valve will release excess pressure with a distinct buzzing sound, indicating optimal carbonation.
- Наслаждаться: Once carbonation is complete, twist the bottle counter-clockwise to release it from the machine. Your sparkling water is ready to be enjoyed.
6. Техническое обслуживание и чистка
6.1 Чистка машины
- Wipe the exterior of the soda machine with a damp ткань. Не погружайте машину в воду.
- Clean the drip tray regularly by removing it and washing with mild soap and water.
6.2 Cleaning the Water Bottle
- Wash the BPA-free PET bottle with warm water and mild dish soap.
- Do not wash the bottle in a dishwasher or use hot water above 50°C (120°F), as this can damage the bottle.
- Перед хранением дайте бутылке полностью высохнуть на воздухе.
6.3 Replacing the CO2 Cylinder
When the CO2 cylinder is empty (no more bubbles are produced), replace it by following the installation steps in Section 4.1 in reverse order to remove the empty cylinder, then install a new one.
7. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| No bubbles or weak carbonation | CO2 cylinder is empty or not properly installed. Bottle not securely twisted. | Replace CO2 cylinder or ensure it is screwed in tightly. Twist bottle firmly into place. Press the carbonation button more times or for longer durations. |
| Water leaking during carbonation | Bottle not properly sealed or overfilled. | Ensure bottle is twisted securely. Do not fill water above the designated fill line. Check bottle for damage. |
| Machine makes a loud buzzing sound | Normal operation of the safety relief valve. | This is normal. It indicates that the pressure inside the bottle has reached the optimal level and excess pressure is being released. |
| Bottle difficult to remove | Residual pressure in the bottle. | Ensure carbonation is complete and the safety valve has released pressure. Twist counter-clockwise firmly but gently. |
8. Технические характеристики
| Особенность | Деталь |
|---|---|
| Номер модели | ADD4902BK/10 |
| Размеры (Д x Ш x В) | 12 x 24 x 42 см (4.7 x 9.4 x 16.5 дюймов) |
| Масса | 2 Килограмм (4.41 фунта) |
| Емкость бутылки | 1 литр |
| Материал бутылки | BPA-Free PET |
| Емкость баллона с CO2 | 425g (up to 60 liters of sparkling water) |
| Источник питания | Manual (no electricity required) |
| Материал | Нержавеющая сталь и пластик |
| Функции безопасности | Integrated safety relief valve |
Изображение 8.1: Размеры изделия
9. Гарантия и поддержка
Philips products are designed and manufactured to the highest standards. For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips webСайт для вашего региона. Сохраните чек о покупке для предъявления гарантийных претензий.
For further assistance, you may contact Philips customer service through their official support channels.