Введение
This manual provides detailed instructions for the setup, operation, and maintenance of your HyperX Cloud II Wireless Gaming Headset. Designed for PC, PlayStation 5, and PlayStation 4, this headset offers a reliable 2.4GHz wireless connection, extended battery life, and immersive audio features.
Содержимое упаковки
- HyperX Cloud II Wireless Headset
- Съемный микрофон с шумоподавлением
- USB-беспроводной ключ
- Зарядный кабель USB-C

Изображение: HyperX Cloud II Wireless Headset with its detachable microphone, USB wireless dongle, and USB-C charging cable.
Продукт болееview

Изображение: Передний view of the HyperX Cloud II Wireless Headset with the detachable microphone connected.
Компоненты гарнитуры
- Регулируемая повязка на голову: Для комфортной посадки.
- Амбушюры из пеноматериала с эффектом памяти: Разработан для комфортного использования в течение длительного времени.
- Съемный микрофон: Flexible, noise-cancelling microphone with an LED mute indicator.
- Кнопка питания: Расположен на левой чашке наушника.
- Колесо громкости: For adjusting audio output level.
- Кнопка отключения микрофона: Включает/выключает микрофон.
- Порт зарядки USB-C: Для подзарядки аккумулятора гарнитуры.

Изображение: Крупный план view of the left earcup showing the power button, microphone mute button, and volume wheel.
Настраивать
1. Зарядка гарнитуры
- Подключите зарядный кабель USB-C к зарядному порту гарнитуры.
- Другой конец кабеля подключите к источнику питания USB (например, к порту USB компьютера, сетевому адаптеру USB).
- The LED indicator on the headset will show charging status. A full charge provides up to 30 hours of use.
2. Connecting to PC, PS5, or PS4
- Insert the USB Wireless Dongle into an available USB port on your PC, PlayStation 5, or PlayStation 4.
- Power on the headset by pressing and holding the power button until the LED indicator illuminates.
- The headset and dongle should automatically pair. A solid LED on both indicates a successful connection.
- On PC, ensure the HyperX Cloud II Wireless is selected as the default audio input and output device in your sound settings.
- For DTS Headphone:X Spatial Audio functionality, download and install the HyperX NGENUITY software on your PC.

Изображение: The HyperX Cloud II Wireless Headset shown alongside its USB wireless dongle, illustrating the wireless connection components.

Изображение: A diagram indicating compatibility of the HyperX Cloud II Wireless Headset with PC, PS5, and PS4. DTS Headphone:X is available on PC.
Инструкция по эксплуатации
Включение/выключение питания
- Для включения нажмите и удерживайте кнопку питания в течение 3 секунд.
- Чтобы выключить, нажмите и удерживайте кнопку питания в течение 3 секунд.
Регулятор громкости
- Rotate the volume wheel on the left earcup up or down to adjust the headset's audio output level.
Отключение микрофона
- Press the microphone mute button on the left earcup to toggle the microphone on or off.
- The LED indicator on the microphone tip will illuminate red when muted.
DTS Headphone:X Spatial Audio (PC Only)
- Once HyperX NGENUITY software is installed on PC, you can activate DTS Headphone:X for enhanced positional audio.
- Refer to the NGENUITY software interface for specific controls.
Микрофонный мониторинг
- The headset features built-in mic monitoring, allowing you to hear your own voice through the headset. This helps prevent speaking too loudly and ensures clear communication.
- Mic monitoring can be adjusted or toggled via the HyperX NGENUITY software on PC.

Изображение: A user wearing the HyperX Cloud II Wireless Headset, with an icon representing mic monitoring functionality.
Обслуживание
Уборка
- Протрите гарнитуру мягкой сухой тканью.
- Избегайте использования едких химикатов и абразивных материалов.
- The earcups are removable for cleaning or replacement. Gently pull to detach and align to reattach.

Изображение: Hands holding the HyperX Cloud II Wireless Headset and demonstrating the removal of an earcup, highlighting its replaceable design.
Уход за аккумулятором
- To maximize battery lifespan, avoid fully discharging the headset frequently.
- Если гарнитура не используется, храните ее в сухом и прохладном месте.
Поиск неисправностей
| Проблема | Возможное решение |
|---|---|
| Нет звука с гарнитуры |
|
| Микрофон не работает |
|
| Гарнитура не подключается |
|
| Короткое время работы батареи |
|
Технические характеристики
- Название модели: Облако II Беспроводная связь
- Номер модели товара: HHSC2X-BA-RD / G
- Технологии подключения: 2.4GHz Wireless
- Headphones Fit Type: Над ухом (круговой)
- Тип аудиодрайвера: Динамический драйвер
- Размер аудиодрайвера: 53 миллиметра
- Сопротивление: 60 Ом
- Контроль шума: Звукоизоляция
- Срок службы батареи: Up to 30 Hours (at 50% headphone volume)
- Диапазон беспроводной связи: До 20 метров
- Совместимые устройства: ПК, PS5, PS4, Nintendo Switch
- Материал: Aluminum, Faux Leather, Memory Foam
- Вес товара: 10.6 Ounces (approximately 300g)
- Размеры продукта: 7.48 x 5.35 x 3.66 дюйма
- Включенные компоненты: Headphones, Microphone, USB Dongle, Charging cable
- СКП: 196188047842
Информация о гарантии
HyperX products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official HyperX webсайт или гарантийный талон, прилагаемый к продукту. Сохраните чек о покупке для предъявления гарантийных претензий.
Поддерживать
For the latest software, firmware updates, and additional support resources, please visit the official HyperX webсайт:
For further assistance, contact HyperX customer support through their official channels.

Изображение: Side of the HyperX Cloud II Wireless packaging, displaying information about downloading NGENUITY software and firmware updates from hyperx.com/ngenuity.