Введение
Thank you for choosing the KICKER SoloX L7X 12-Inch Competition Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your new subwoofer. To ensure optimal performance and longevity, please read this manual thoroughly before attempting installation or use.
The SoloX L7X is engineered for groundbreaking bass performance, featuring a robust design and advanced cooling technology, making it suitable for high-level competition audio systems.
Информация по безопасности
ПРЕДУПРЕЖДЕНИЕ:
- Always disconnect the vehicle's battery before installing or servicing any audio components to prevent electrical shock or damage.
- Ensure all wiring is properly insulated and secured to prevent short circuits and potential fire hazards.
- Избегайте установки сабвуфера в местах, где он может препятствовать движению транспортного средства или работе устройств безопасности.
- Prolonged exposure to sound pressure levels over 100dB can cause permanent hearing loss. Use caution when operating at high volumes.
- Если вы не уверены в каком-либо аспекте процесса установки, обратитесь к профессиональному установщику.
Содержимое упаковки
Проверьте наличие всех предметов в упаковке:
- KICKER SoloX L7X 12-Inch Competition Subwoofer (Model: 49L7X122)
- Руководство по эксплуатации (данный документ)
Основные характеристики
The KICKER SoloX L7X 12-Inch Subwoofer incorporates several advanced features for superior performance:
- Triple-Stacked Ferrite Magnet: Provides an enormous and linear magnetic field for powerful, deep bass reproduction.
- Hyper-Extended Pole Piece: Enhances magnetic field linearity, contributing to precise and impactful low-frequency output.
- Forced Air Cooling Technology: Actively dissipates heat, ensuring stable performance and durability even under extreme conditions.
- Heavy-Duty UV-Resistant Santoprene Surround: Designed for durability and long-term performance in various environments.
- Double-Pressed Pulp Cone: Offers rigidity and lightweight properties for accurate sound reproduction.
- Cast-Aluminum Basket: Provides a robust and stable foundation for the subwoofer's components.
- Field-Replaceable Recone Kit: Allows for easy repair and maintenance without professional assistance.
- Exclusive Surround Compression System: Ensures optimal cone movement and durability.
- Bolt-On Spider Landing and Alignment Shims: Facilitate precise assembly and maintenance.
- Flexible Wiring Options: Features a single 8 AWG terminal and a dual 8 AWG terminal block for versatile installation.
Изображение: Спереди view of the KICKER SoloX L7X 12-Inch Competition Subwoofer, showcasing its square cone and robust surround.
Изображение: под углом view of the KICKER SoloX L7X 12-Inch Subwoofer, highlighting its deep basket and cooling fins.
Изображение: вид сбокуfile of the KICKER SoloX L7X 12-Inch Subwoofer, showing the depth of the motor structure and the cooling design.
Изображение: Крупный план view of the heavy-duty UV-resistant Santoprene surround, demonstrating its robust construction.
Настройка и установка
Proper installation is crucial for the performance and longevity of your SoloX L7X subwoofer. It is recommended to have this subwoofer installed by a qualified professional.
Требования к корпусу
The SoloX L7X is designed for use in custom-built enclosures. Refer to KICKER's official documentation or website for recommended enclosure volumes and port tuning frequencies for optimal performance. An improperly sized or constructed enclosure can severely limit the subwoofer's performance and potentially cause damage.
Соединения проводки
The SoloX L7X features a single 8 AWG terminal and a dual 8 AWG terminal block, allowing for flexible wiring configurations (e.g., series or parallel) to achieve the desired impedance for your amplifier. Ensure all connections are secure and properly insulated.
- Электропроводка: Используйте силовые и заземляющие провода соответствующего сечения. amplifier's power output. Ensure the ground connection is made to a clean, unpainted metal surface of the vehicle chassis.
- Проводка динамика: Connect the subwoofer terminals to your amplifier's speaker outputs. Pay close attention to polarity (+ to + and - to -) to ensure proper phase and sound quality.
Image: Rear angled view of the KICKER SoloX L7X Subwoofer, illustrating the single and dual 8 AWG terminal blocks for wiring flexibility.
Изображение: сбоку view of the KICKER SoloX L7X Subwoofer, providing a closer look at the robust terminal connections.
Amplifier Matching
Выберите amplifier that can provide sufficient power within the subwoofer's RMS power handling capabilities. Overpowering or underpowering the subwoofer can lead to damage. Match the amplifier's output impedance to the subwoofer's impedance for optimal power transfer and efficiency.
Инструкция по эксплуатации
Once installed, the SoloX L7X subwoofer requires proper tuning for optimal sound quality and longevity.
- Период обкатки: Allow a break-in period of several hours of moderate use before operating the subwoofer at high volumes. This allows the suspension components to loosen and perform optimally.
- Настройка усиления: Установите amplifier's gain control carefully. Do not use the gain control as a volume knob. It should be set to match the output voltage вашего головного устройства. Обратитесь к вашему ampИнструкция к усилителю содержит информацию о правильной настройке усиления.
- Настройки кроссовера: Используйте фильтр нижних частот (ФНЧ) на вашем amplifier or head unit to send only low frequencies to the subwoofer. A typical crossover point for subwoofers is between 60Hz and 100Hz.
- Дозвуковой фильтр: Если ваш ampУсилитель имеет субзвуковой фильтр, включите его и установите значение немного ниже частоты настройки вашего корпуса, чтобы защитить сабвуфер от чрезмерного хода диффузора на очень низких частотах.
- Усиление басов: Use bass boost sparingly, if at all. Excessive bass boost can lead to distortion and damage the subwoofer.
Video: An official KICKER video showcasing the SoloX L7X High Performance Subwoofer, detailing its features and design. This video provides a visual overview of the product's capabilities and construction.
Обслуживание
The KICKER SoloX L7X is built for durability, but regular maintenance can extend its lifespan and ensure consistent performance.
- Уборка: Keep the subwoofer cone and surround free of dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or solvents.
- Инспекция: Periodically inspect the surround and cone for any signs of damage, tears, or fatigue. Check all wiring connections for tightness and corrosion.
- Field-Replaceable Recone Kit: The SoloX L7X features a field-replaceable recone kit. If the cone or voice coil assembly becomes damaged, you can replace these components without needing to replace the entire subwoofer. Follow the instructions provided with the recone kit for proper installation. This process involves the exclusive surround compression system, bolt-on spider landing, and alignment shims.
Поиск неисправностей
If you experience issues with your SoloX L7X subwoofer, refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Нет звука из сабвуфера |
|
|
| Искаженный звук |
|
|
| Слабый басовый выход |
|
|
Технические характеристики
| Атрибут | Деталь |
|---|---|
| Номер модели | 49L7X122 |
| Вес товара | 52.9 фунта |
| Производитель | Кикер |
| ASIN | B08NF9PDLV |
| Первая доступная дата | 13 ноября 2020 г. |
| Катушка | 3-дюймовый |
| Тип магнита | Ferrite (Triple-Stacked) |
| Сопротивление | 2 Ом |
Гарантия и поддержка
KICKER products are designed and manufactured to the highest standards. For specific warranty information, please refer to the warranty card included with your product or visit the official KICKER webСохраните чек о покупке в качестве подтверждения покупки для предъявления гарантийных претензий.
For technical support, troubleshooting assistance, or to inquire about replacement parts (such as the recone kit), please contact KICKER customer service or visit their official support channels. You can often find detailed FAQs, product manuals, and contact information on the KICKER webсайт.
