1. Важные инструкции по технике безопасности
Always observe basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before use.
- Безопасность рабочей зоны: Поддерживайте чистоту и хорошее освещение рабочего места. Загромождённые или тёмные места могут стать причиной несчастных случаев. Не работайте с электроинструментами во взрывоопасной среде, например, в присутствии легковоспламеняющихся жидкостей, газов или пыли.
- Электробезопасность: Вилки электроинструментов должны соответствовать розетке. Никогда не модифицируйте вилку. Избегайте контакта тела с заземлёнными поверхностями.
- Личная безопасность: Всегда надевайте защитные очки. Используйте средства защиты органов слуха при работе с шумными инструментами. Одевайтесь правильно; не надевайте свободную одежду и украшения. Закрепите длинные волосы.
- Использование и уход за инструментом: Не прилагайте чрезмерных усилий при работе с электроинструментом. Используйте подходящий для вашей задачи электроинструмент. Отсоедините вилку от источника питания перед выполнением любых регулировок, заменой принадлежностей или хранением электроинструмента.
- Mitre Saw Specific Safety: Ensure the blade guard is always in place and functioning correctly. Keep hands away from the cutting area. Secure the workpiece firmly before cutting. Allow the blade to reach full speed before beginning a cut.
- Лазерная безопасность: Do not stare directly into the laser beam. Avoid directing the laser beam at other persons or reflective surfaces.
2. Продукт закончилсяview
The Scheppach HM254 Mitre Saw is a powerful tool designed for precise cutting of wood, plastic, and aluminum. It comes bundled with the UMF2000 Support Stand for enhanced stability and versatility.
Содержимое комплекта:
- Scheppach HM 254 Mitre Saw
- HW 48T Saw Blade
- HW 60T Saw Blade
- Scheppach UMF 2000 Support Stand
Основные характеристики:
- Мощный мотор: 2000W motor for versatile cutting tasks.
- Precision Laser Guide: Integrated laser for accurate cutting line indication.
- Wide Cutting Capacity: Up to 340 mm cutting width and 90 mm cutting height.
- Мягкий старт: Ensures a smooth and controlled start-up.
- Прочная конструкция: Stable and lightweight die-cast aluminum frame.
- Повышенная безопасность: Fully enclosed blade guard.
- UMF2000 Support Stand: Provides ergonomic working height, lightweight yet sturdy construction, universal machine grip, and a maximum load capacity of 250 kg. Features extendable side supports for long workpieces.
3. Настройка
Распаковка и осмотр:
- Аккуратно извлеките все компоненты из упаковки.
- Verify that all listed kit contents are present.
- Inspect all parts for any signs of shipping damage. Do not operate the tool if damage is found.
HM254 Mitre Saw Assembly:
- Установка лезвия: Ensure the saw is unplugged. Open the blade guard. Carefully mount the desired saw blade (HW 48T for general purpose, HW 60T for finer cuts) onto the arbor, ensuring the rotation direction matches the arrow on the guard. Secure with the arbor nut.
- Монтаж основания: Secure the saw to a stable workbench or the UMF2000 support stand using appropriate bolts and nuts.
- Корректировки: Familiarize yourself with the miter angle, bevel angle, and depth adjustment mechanisms. Refer to the markings for common angles.
- Лазерная центровка: The laser guide is pre-calibrated, but check its alignment with a test cut on scrap material. Adjust if necessary according to the detailed instructions in the full manual.
UMF2000 Support Stand Assembly:
- Настройка ног: Unfold the legs of the UMF2000 stand and ensure they are securely locked in place.
- Attaching the Saw: Place the HM254 mitre saw onto the universal adjustable machine grips of the UMF2000 stand. Secure the saw using the provided clampс или болты.
- Adjusting Support Arms: Extend the side support arms to the desired length for supporting long workpieces. Adjust the height of the support rollers to match the saw's cutting surface.
4. Операция
Общая операция:
- Подключение питания: Connect the saw to a 230V power supply. Ensure the power outlet is properly grounded.
- Пригодность материала: The HM254 is suitable for cutting wood, plastic, and aluminum. Always use the appropriate blade for the material.
- Крепление заготовки: Всегда клamp the workpiece firmly to the fence and table before making any cut. Never hold the workpiece by hand.
Процедуры резки:
- Miter Cuts: Adjust the turntable to the desired angle (left or right). Lock the turntable securely.
- Косые срезы: Adjust the saw head to the desired bevel angle (typically left only for this model). Lock the saw head securely.
- Смешанные срезы: Combine miter and bevel adjustments for complex angles.
- Using the Laser Guide: Activate the laser to project a cutting line onto the workpiece. Align the workpiece with this line for precise cuts.
- Проведение отбора: With the workpiece secured, depress the trigger to start the saw. Allow the blade to reach full speed (soft start will manage this smoothly). Slowly lower the saw head through the material. Once the cut is complete, release the trigger and allow the blade to stop completely before raising the saw head.
5. Техническое обслуживание
Regular maintenance ensures the longevity and safe operation of your Scheppach HM254 Mitre Saw and UMF2000 Support Stand.
Уборка:
- Sawdust Removal: After each use, disconnect the saw from power and use a brush or vacuum cleaner to remove sawdust and debris from the motor vents, blade guard, and table.
- Очистка лезвия: Periodically clean the saw blade to remove resin and pitch buildup, which can affect cutting performance. Use a suitable blade cleaner.
Замена лезвия:
- Безопасность прежде всего: Always unplug the saw before attempting to change the blade.
- Удалить старый клинок: Use the provided wrench to loosen the arbor nut while holding the blade still with the blade lock button. Carefully remove the old blade.
- Установка нового лезвия: Place the new 255mm blade onto the arbor, ensuring the teeth are oriented correctly for cutting (matching the rotation arrow). Tighten the arbor nut securely.
Смазка:
Periodically apply a light machine oil to moving parts, such as the sliding mechanism and pivot points, to ensure smooth operation. Avoid lubricating electrical components.
Хранилище:
Store the saw and stand in a clean, dry, and secure location, out of reach of children. Protect the blade from damage during storage.
6. Поиск Неисправностей
This section addresses common issues you might encounter during the operation of your mitre saw.
- Пила не заводится:
- Проверьте, надежно ли подключен шнур питания к работающей розетке.
- Убедитесь, что автоматический выключатель не сработал.
- Ensure the safety switch or trigger lock is fully engaged.
- Неточные разрезы:
- Проверьте, не затупилось ли лезвие или не повреждено ли оно, и при необходимости замените его.
- Убедитесь, что заготовкаamped securely and not shifting during the cut.
- Verify that all angle adjustments (miter, bevel) are locked tightly.
- Calibrate the laser guide if it appears misaligned.
- Чрезмерная вибрация или шум:
- Inspect the blade for damage, missing teeth, or improper installation.
- Ensure all mounting bolts for the saw and stand are tight.
- Check for any loose components or debris within the saw mechanism.
- Blade Binding in Material:
- Ensure the workpiece is properly supported and not pinching the blade.
- Do not force the saw; allow the blade to cut at its own pace.
- Check if the blade is dull or has excessive resin buildup.
7. Технические характеристики
Scheppach HM254 Mitre Saw:
- Входная мощность: 2000 Вт
- Томtage: 230В
- Диаметр лезвия: 255 мм
- Blade Rotation Speed: 4500 об/мин
- Cutting Width (90°/90°): 340 х 90 мм
- Cutting Width (90°/45°): 340 х 45 мм
- Cutting Width (45°/90°): 240 х 90 мм
- Cutting Width (45°/45°): 240 х 45 мм
- Размеры (Д x Ш x В): 770 х 595 х 590 мм
- Масса: 14.3 кг
- Материал лезвия: Aluminum Oxide (for included blades)
- Рекомендации по поверхности: Алюминий, пластик, дерево
Scheppach UMF2000 Support Stand:
- Максимальная грузоподъемность: 250 кг
- Length (Extendable Supports): 1160 - 2000 мм
- Height with Support Arm: 900 мм
- Ширина стола: Макс. 375 мм
- Масса: 13.5 кг
8. Гарантия и поддержка
Scheppach products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty against defects in materials and workmanship.
For warranty claims, technical support, or spare parts, please contact your authorized Scheppach dealer or visit the official Scheppach webсайт для получения подробной контактной информации.
Сохраните чек о покупке для гарантийных целей.
