RISOON Solar Strobe Warning Safety Flashing Light

Введение

This instruction manual provides essential information for the safe and effective use of your RISOON Solar Strobe Warning Safety Flashing Light, Model AL. This device is designed to provide a highly visible warning signal in various environments, utilizing solar power for autonomous operation and a strong magnetic base for versatile mounting. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of the product.

Важная информация по безопасности

• Для оптимальной зарядки убедитесь, что солнечная панель находится под прямыми солнечными лучами.
• Не пытайтесь вскрывать или модифицировать устройство, так как это может привести к аннулированию гарантии и создать угрозу безопасности.
• Держите устройство подальше от источников сильного нагрева или открытого огня.
• Verify the magnetic base is securely attached to a ferromagnetic surface before operation to prevent accidental detachment.
• Dispose of the product and its battery according to local regulations.

Содержимое упаковки

Пожалуйста, проверьте комплектацию, чтобы убедиться в наличии всех предметов:

• 1 x RISOON Solar Strobe Warning Safety Flashing Light (Model AL)
• 1 литий-полимерный аккумулятор (предустановлен)

Характеристики продукта

• Солнечная энергия: Equipped with a solar panel for environmental protection and energy conservation.
• Сильная магнитная основа: Features a heavy-duty magnetic base for secure attachment to metallic surfaces without scratching.
• Высокая видимость: 16 super bright LEDs provide 360° coverage with a visual distance of up to 1500m in darkness.
• Прочная конструкция: Made from PC+ABS materials, ensuring weatherproof performance with an IP65 rating.
• Автоматическая работа: Automatically charges during the day and illuminates at night when the switch is in the "ON" position.
• Универсальное применение: Suitable for aerial work, road construction, construction fences, ships, streets, parking lots, and schools.

Описание изображения: This image displays the key components of the RISOON Solar Strobe Light. It highlights the solar panel for charging, the super magnet at the base for secure attachment, the single power switch for control, and the high-quality ABS plastic material used for the lamp body, emphasizing durability and good light transmittance.

Описание изображения: This image illustrates the IP65 waterproof and dustproof capabilities of the RISOON Solar Strobe Light. Water splashes are shown around the red light, indicating its resistance to rain and dust, making it suitable for outdoor use in various weather conditions.

Настройка и установка

1. Первоначальный взнос

1. Upon receiving the light, ensure the power switch (located at the bottom) is in the "ON" position.
2. Place the solar strobe light in direct sunlight for at least 8-10 hours to allow the internal battery to fully charge. This initial charge is crucial for optimal performance.

2 Монтаж

1. Identify a suitable location for the light. The location should have ample direct sunlight exposure for the solar panel and a flat, ferromagnetic surface for the magnetic base.
2. Clean the mounting surface to ensure a strong magnetic connection.
3. Place the light firmly onto the desired metallic surface. The strong magnetic base will secure it in place.
4. Ensure the light is stable and will not be easily dislodged by wind or vibrations.

Описание изображения: This image demonstrates the magnetic mounting capability of the RISOON Solar Strobe Light. The light is shown securely attached to a red and white striped warning post, highlighting its strong adsorption, quick installation, and wide adaptability to various iron surfaces.

Операция

1. Включение/выключение питания

• Locate the power switch on the bottom of the unit.
• Slide the switch to the "ON" position to activate the light's automatic function.
• Slide the switch to the "OFF" position to deactivate the light.

2. Автоматический режим работы.

• Once the switch is "ON" and the battery is charged, the light will automatically detect ambient light levels.
• During daylight hours, the solar panel will charge the internal battery. The light will not flash.
• At night or in low-light conditions, the light will automatically begin flashing its red and blue LEDs to provide a warning signal.

Описание изображения: This image illustrates the Red+Blue warning light in operation, showing the simultaneous flashing of red and blue lights. It also contrasts with a white warning light option, which alternates between blue and white flashes.

Обслуживание

• Уборка: Regularly wipe the solar panel and the light's housing with a soft, damp Ткань для удаления пыли, грязи и мусора. Чистая солнечная панель обеспечивает эффективную зарядку.
• Инспекция: Periodically check the magnetic base for any signs of wear or damage. Ensure the rubber ring on the bottom is intact to prevent slippage and scratches.
• Хранилище: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge it periodically to maintain battery health.

Поиск неисправностей

Light Does Not Flash at Night:

• Проверьте выключатель питания: Ensure the switch on the bottom of the light is in the "ON" position.
• Воздействие солнечных лучей: Verify the solar panel receives adequate direct sunlight during the day. Obstructions like dirt, leaves, or shade can hinder charging.
• Заряд батареи: The battery might be depleted. Allow the light to charge for a full day in direct sunlight.
• Окружающий свет: The light has a built-in light sensor. Ensure there are no strong artificial light sources nearby that might prevent it from activating at night.

Light Flashes Weakly or for a Short Duration:

• Недостаточный заряд: The battery may not be fully charged. Ensure the solar panel is clean and exposed to direct sunlight for a longer period.
• Деградация батареи: Over time, rechargeable batteries can degrade. If the issue persists after proper charging, the battery may need replacement (contact support for assistance).

Magnetic Base Not Holding Securely:

• Чистота поверхности: Ensure both the magnetic base and the mounting surface are clean and free of dirt, rust, or debris.
• Материал поверхности: The magnetic base requires a ferromagnetic (iron or steel) surface for secure attachment. It will not adhere to aluminum, plastic, or other non-magnetic materials.
• Surface Flatness: Ensure the mounting surface is flat to allow full contact with the magnetic base.

Технические характеристики

Описание изображения: This image provides the dimensions of the RISOON Solar Strobe Light. It shows a height of 106mm, a top diameter of 82mm, and a base diameter of 124mm, alongside various color options for the light.

Гарантия и поддержка

For warranty information, technical support, or any inquiries regarding your RISOON Solar Strobe Warning Safety Flashing Light, please contact RISOON customer service through the retailer's platform or the official RISOON website. Please have your model number (AL) and purchase date available when contacting support.