Продукт болееview
The ICT Billet Alternator Relocation Bracket Kit (Model 551587-LS01-3) is designed to relocate the alternator on various GM LS series engines. This kit is compatible with truck/SUV (or LS3/L99 Camaro) crank pulleys and 1998-2002 LS1 Camaro (or LS3) water pumps. It is manufactured from aerospace-grade USA billet aluminum, ensuring durability and precise fitment.
This kit includes the necessary alternator bracket components and mounting hardware for installation.
Figure 1: The ICT Billet Alternator Relocation Bracket Kit installed on an LS engine, showing the relocated alternator and belt routing.
Содержимое комплекта
Перед началом установки убедитесь в наличии всех компонентов:
- Upper Alternator Bracket
- Lower Alternator Bracket
- Mounting Hardware (various bolts and spacers)
Figure 2: All components included in the ICT Billet Alternator Relocation Bracket Kit, showing the two main bracket pieces and various bolts and spacers.
Совместимость и требования
This bracket kit is designed for specific engine and accessory configurations:
- Совместимость двигателя: All GM LS series engines.
- Crank Pulley Compatibility: Truck/SUV crank pulley or LS3/L99 Camaro crank pulley.
- Water Pump Compatibility: 1998-2002 LS1 Camaro water pump or LS3 water pump.
It is crucial to ensure your engine's crank pulley spacing matches the requirements for proper belt alignment and function. Refer to the LS Crank Spacing Guide for detailed measurements.
Figure 3: LS Crank Spacing Guide illustrating the three common crank pulley types (Corvette/CTS-V/SS/G8, 98-02 Camaro/GTO, and Truck/SUV/2010-Up Camaro) with their respective offset measurements from the face of the engine block.
Инструкция по установке
Professional installation is recommended. Ensure the engine is cool and disconnected from the battery before beginning any work.
- Подготовка: Disconnect the negative battery terminal. If applicable, remove the existing alternator and any brackets that will be replaced by this kit.
- Монтаж кронштейна: Attach the lower alternator bracket to the designated mounting points on the engine block. Use the provided hardware and ensure proper torque specifications are met (refer to a service manual for your specific engine).
- Установка генератора: Mount the alternator onto the new brackets. Secure it using the provided bolts and spacers. Ensure the alternator is seated correctly and can pivot freely if necessary for belt tensioning.
- Маршрутизация конвейерной ленты: Route the serpentine belt according to the engine's accessory drive system. Ensure the belt is properly seated on all pulleys, including the relocated alternator pulley.
- Натяжение: Adjust the belt tensioner to achieve the correct belt tension. A properly tensioned belt should have minimal deflection.
- Окончательные проверки: Double-check all bolted connections for tightness. Reconnect the battery terminal. Start the engine and verify proper alternator function and belt alignment. Listen for any unusual noises.
Figure 4: Technical drawing showing the installed bracket kit on an LS engine, including critical dimensions for clearance and fitment, such as the alternator's position relative to the engine block.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Belt Squeal/Noise | Incorrect belt tension, misaligned pulleys, worn belt. | Check and adjust belt tension. Verify all pulleys are aligned. Inspect belt for wear and replace if necessary. Ensure correct crank pulley spacing. |
| Alternator Not Charging | Loose electrical connections, faulty alternator, incorrect belt tension. | Inspect all electrical connections to the alternator. Test alternator output. Verify belt tension. |
| Bracket Interference | Incorrect component selection (e.g., steam port kit), improper installation. | Verify all components (crank pulley, water pump, steam port kit) are compatible with this bracket. Re-check installation steps and clearances. |
Технические характеристики
- Номер модели: 551587-LS01-3
- Материал: Aerospace Grade USA Billet Aluminum
- Вес товара: 1.98 фунта
- Размеры упаковки: 7.91 x 4.33 x 0.98 дюйма
- Страна происхождения: США
- Совместимость: GM LS series engines with Truck/SUV (or LS3/L99 Camaro) crank pulley and 1998-2002 LS1 Camaro (or LS3) water pump.
Обслуживание
This alternator relocation bracket kit requires minimal maintenance. Periodically inspect the following:
- Крепеж: Check all mounting bolts for tightness, especially after the first few hundred miles of operation. Re-torque if necessary.
- Состояние ремня: Inspect the serpentine belt for cracks, fraying, or excessive wear. Replace the belt as part of routine engine maintenance if needed.
- Bracket Condition: Visually inspect the aluminum brackets for any signs of damage or corrosion. Clean with a mild automotive cleaner if desired.
Гарантия и поддержка
For warranty information or technical support, please contact ICT Billet directly. Refer to the official ICT Billet webАктуальную контактную информацию и условия гарантии вы можете найти на сайте или в документах, подтверждающих покупку.
Производитель: ICT Billet llc
Webсайт: Visit the ICT Billet Store on Amazon
Руководство по установке (PDF): A detailed PDF installation manual may be available for download. Please check the product page or manufacturer's website for availability: Инструкция по эксплуатации Скачать PDF
