1. Введение
This manual provides instructions for the safe and efficient operation of your KODAK Step Instant Smartphone Photo Printer. Please read this guide thoroughly before using the device to ensure proper functionality and to prevent damage.
2. Что в коробке
Проверьте наличие всех предметов в посылке:
- Мобильный фотопринтер KODAK STEP с функцией мгновенной печати
- Кабель для зарядки Micro USB
- Стартовый пакет фотобумаги KODAK ZINK
- Краткое руководство пользователя
- Информация об ограниченной гарантии
3. Продукт закончилсяview
Familiarize yourself with the components of your KODAK Step Instant Photo Printer.
Изображение 3.1: Передний view of the KODAK Step Instant Photo Printer with labels for Status Indicator, Reset Button, Charging Indicator Light, Micro USB Charging Port, Power Button, and Photo Print Slot.
- Кнопка питания: Включает/выключает принтер.
- Порт зарядки Micro USB: Подключает принтер к источнику питания для зарядки.
- Индикатор зарядного индикатора: Указывает состояние зарядки.
- Индикатор состояния: Displays printer status (e.g., on, off, error).
- Кнопка сброса: Used to reset the device if needed.
- Photo Print Slot: Место, откуда выходят напечатанные фотографии из устройства.
4. Настройка
4.1 Зарядка принтера
Before first use, fully charge the printer. Connect the Micro USB Charging Cable to the printer's charging port and a compatible USB power adapter (not included). The Charging Indicator Light will show the charging status.
4.2 Loading ZINK Photo Paper
The KODAK Step Printer uses ZINK (Zero Ink) 2x3 inch photo paper. No ink cartridges are required.
- Gently slide off the top cover of the printer.
- Insert the stack of ZINK photo paper into the paper tray. Ensure the blue calibration card is at the bottom of the stack, facing down. The glossy side of the photo paper should face upwards.
- Установите верхнюю крышку на место и убедитесь, что она надежно защелкнулась.
Видео 4.2.1: Demonstration of loading ZINK photo paper into the KODAK Step Instant Photo Printer. The video shows the top cover being removed, paper inserted, and the cover replaced.
4.3 Downloading the KODAK STEP Prints App
To operate the printer, download the official KODAK STEP Prints app from your device's app store (iOS or Android). The app allows you to select, edit, and print photos.
4.4 Сопряжение через Bluetooth
- Turn on your KODAK Step Printer by pressing and holding the Power Button until the Status Indicator light illuminates.
- Включите Bluetooth на своем смартфоне или планшете.
- Open the KODAK STEP Prints app. The app will guide you through the pairing process. Select "KODAK STEP" from the list of available devices.
- Once paired, the Status Indicator light on the printer may change to indicate a successful connection.
Изображение 4.4.1: Накладные расходы view showing the KODAK Step Instant Photo Printer, a smartphone displaying the app interface, and several printed photos, illustrating Bluetooth connectivity.
5. Эксплуатация принтера
5.1 Печать фотографий
- Ensure your printer is charged, loaded with paper, and connected via Bluetooth to the KODAK STEP Prints app.
- In the app, select the photo you wish to print from your device's gallery.
- Use the app's editing tools to adjust the photo as desired (see section 5.2).
- Confirm the print preview and select the number of copies.
- Tap the "Print" button in the app. The photo will begin printing from the Photo Print Slot.
Видео 5.1.1: A video demonstrating the KODAK Step Instant Photo Printer in action, showing a photo being printed from the device.
5.2 Using the Editing App
The KODAK STEP Prints app offers various features to enhance your photos before printing:
- Фильтры: Apply different visual effects to your photos.
- Границы: Add decorative frames around your images.
- Наклейки: Choose from a selection of digital stickers to personalize your prints.
- Текст: Add custom text to your photos.
- Collages: Combine multiple photos into a single print.
Изображение 5.2.1: A visual representation of the KODAK STEP Prints app interface, highlighting options for filters, stickers, and borders to customize photos.
6. Техническое обслуживание
6.1 Чистка принтера
To maintain optimal print quality, occasionally clean the printer's rollers. Use the blue calibration card included with your ZINK paper. Follow these steps:
- Убедитесь, что принтер выключен.
- Gently slide off the top cover.
- Remove any remaining photo paper.
- Insert the blue calibration card into the paper tray, with the barcode facing down.
- Replace the top cover and turn on the printer.
- Initiate a print command from the app (e.g., print a blank image). The printer will run the calibration card through, cleaning the rollers.
Note: If print quality issues persist, repeat the cleaning process or consult the troubleshooting section.
6.2 Замена фотобумаги
When the printer runs out of paper, the Status Indicator may signal this. Follow the steps in section 4.2 to load a new pack of KODAK ZINK Photo Paper.
7. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Принтер не включается. | Низкий заряд батареи. | Charge the printer using the Micro USB cable. |
| Невозможно подключиться через Bluetooth. | Bluetooth is off on device or printer. Printer is out of range. | Ensure Bluetooth is enabled on both devices. Move printer closer to your smartphone/tablet. Restart both devices. |
| Низкое качество печати (полосы, блеклые цвета). | Dirty rollers. Low quality original image. | Perform a roller cleaning cycle (see section 6.1). Use a higher resolution image. |
| Paper jam or "out of paper" error when paper is present. | Paper incorrectly loaded. Debris in paper path. | Remove and re-load paper correctly (see section 4.2). Check for any obstructions in the paper path. |
8. Технические характеристики
| Особенность | Деталь |
|---|---|
| Название модели | Kodak Step Instant Photo Printer |
| Номер модели | RODMP20AMZW |
| Бренд | КОДАК |
| Технология печати | Технология цинка |
| Технология связи | Bluetooth, NFC |
| Совместимые устройства | Смартфоны (Android, iOS) |
| Максимальный размер носителя | 2x3 дюйма |
| Максимальное разрешение цветной печати | 313 x 400 точек на дюйм |
| Максимальная скорость печати (цветная) | 1 частей на миллион |
| Потребляемая мощность | 7.4 Вт |
| Аккумуляторы | 1 литий-ионный аккумулятор (входит в комплект) |
| Вес товара | 2.39 унций (0.07 килограмма) |
| Размеры продукта | 1"Д x 2"Ш x 3"В |
9. Гарантия и поддержка
The KODAK Step Instant Smartphone Photo Printer comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the Limited Warranty Information included in your product package.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact KODAK customer service. Contact information can typically be found on the official KODAK webсайте или в документации к вашему продукту.
