Lepro 410084-RGB-US-NF-a

Lepro 32.8ft RGB LED Strip Lights User Manual

Model: 410084-RGB-US-NF-a

1. Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Lepro 32.8ft RGB LED Strip Lights kit showing two rolls of LED strips, a remote control, and a power adapter.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Содержимое упаковки

Убедитесь, что в упаковке присутствуют все компоненты:

  • 2 x 16.4ft (5m) RGB LED Strip Lights
  • 1 x 44-Key IR Remote Control
  • 1 х 12 В адаптер питания
  • 1 x Control Box (IR Receiver)

3. Установка и настройка

Для правильной установки выполните следующие действия:

  1. Подготовка поверхности: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
  2. Измерение и резка (необязательно): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
  3. Прикрепите полоску: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
  4. Подключить компоненты:
    • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
    • Connect the 12V power adapter to the control box.
    • Подключите адаптер питания к стандартной электрической розетке.
  5. Активировать удаленно: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Diagram showing the connection of LED strip lights to the control box and power adapter, with an arrow indicating to pull out the plastic chip from the remote.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.

4. Инструкция по эксплуатации

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

44-key IR remote control for LED strip lights, showing buttons for colors, brightness, and dynamic modes.

Figure 3: 44-Key IR Remote Control Layout

Функции дистанционного управления:

  • Вкл/Выкл: Power button to turn the lights on or off.
  • Регулировка яркости: Up/Down arrows to increase or decrease brightness.
  • Выбор цвета: 20 preset static colors, including Red, Green, Blue, and White.
  • Цвета, которые вы можете выбрать сами: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
  • Динамические режимы: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Техническое обслуживание

To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:

  • Уборка: Для удаления пыли аккуратно протрите светодиодные ленты сухой мягкой тканью. Избегайте использования жидких чистящих средств или абразивных материалов.
  • Среда: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
  • Уход за клеем: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Поиск Неисправностей

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

ПроблемаВозможная причинаРешение
Свет не включается.
  • Адаптер питания не подключен.
  • Remote battery depleted or plastic tab not removed.
  • Incorrect connection between strip and control box.
  • Ensure power adapter is securely plugged into outlet and control box.
  • Remove plastic tab from remote battery. Replace battery if necessary.
  • Verify arrow alignment on all connectors.
Пульт дистанционного управления не работает.
  • Remote not pointed at IR receiver.
  • Препятствие между пультом дистанционного управления и приемником.
  • Remote battery issue.
  • Point remote directly at the small black IR receiver on the control box.
  • Устраните все препятствия.
  • Проверьте/замените батарейку в пульте дистанционного управления.
Some LEDs show incorrect color or are off.
  • Damage to a section of the LED strip.
  • Неправильное соединение.
  • Inspect the strip for physical damage. If a section is damaged, it may require replacement.
  • Убедитесь, что все соединения надежны.
LED strip falls off surface.
  • Поверхность не чистая и не гладкая.
  • Недостаточное давление во время монтажа.
  • Clean the surface thoroughly before re-applying.
  • Apply firm, even pressure along the entire strip during installation. Consider using additional adhesive clips for heavy-duty applications.

7. Технические характеристики продукта

ОсобенностьДеталь
БрендЛепро
Номер модели410084-RGB-US-NF-a
ЦветRGB (красный, зеленый, синий)
Использование внутри и снаружи помещенийВ помещении
Специальная характеристикаДиммируемый
Тип источника светаВЕЛ
Источник питанияПроводной электрический
МатериалМедь, Пластик
Тип контроллераДистанционное управление
Количество источников света300 (total for 32.8ft)
Томtage12 Вольт
Ватtage36 Вт
Вес товара0.33 килограмма (11.6 унции)
Длина элемента32.8 Feet (2 x 16.4ft)

8. Информация о гарантии

На этот продукт распространяется действие Гарантия 2 год from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Поддержка клиентов

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.

Связанные документы - 410084-RGB-US-NF-a

Предварительноview Руководство пользователя интеллектуальной светодиодной ленты Lepro S1
Подробное руководство пользователя для светодиодной ленты Lepro S1 Smart (модель: 2A3MAS1) с подробным описанием установки, эксплуатации и характеристик.
Предварительноview Руководство пользователя и технические характеристики светодиодной ленты Lepro
Руководство пользователя для светодиодных лент Lepro (серия моделей PR4100067). Содержит информацию по установке, технике безопасности, техническим характеристикам и утилизации.
Предварительноview Интеллектуальная светодиодная лента Lepro S1: руководство по установке, характеристикам и технике безопасности.
Подробное руководство по использованию интеллектуальной светодиодной ленты Lepro S1, включающее установку, подключение к приложению, интеграцию с голосовым управлением, меры предосторожности, технические характеристики и информацию о гарантии.
Предварительноview Руководство пользователя и руководство по безопасности для постоянного светодиодного уличного освещения Lepro AI
Подробное руководство по постоянным уличным светодиодным светильникам Lepro AI, включающее установку, подключение к приложению, голосовое управление, меры предосторожности и технические характеристики для моделей E1-30, E1-60 и E1-90.
Предварительноview Руководство по установке и эксплуатации умного светодиодного светильника Lepro R2
Подробное руководство по установке и использованию умного светодиодного светильника Lepro R2, включающее подключение к приложению, настройку голосового управления, монтаж и информацию по безопасности.
Предварительноview Руководство пользователя и технические характеристики светодиодной уличной гирлянды Lepro ZB1 AI
Подробное руководство пользователя и технические характеристики уличной светодиодной гирлянды Lepro ZB1 AI, подробное описание ее функций, информация об установке и соответствии.