1. Введение
Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.
2. Информация по технике безопасности
Внимательно ознакомьтесь с данными инструкциями по технике безопасности перед установкой и эксплуатацией. Несоблюдение этих инструкций может привести к поражению электрическим током, пожару или другим опасностям.
- Профессиональная установка: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
- Отключение питания: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the device.
- Томtage: Обеспечьте объем поставкиtage matches the device's requirements (230 Volt AC).
- Условия окружающей среды: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
- Модификация: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.
3. Содержимое упаковки
Перед началом установки убедитесь, что все компоненты присутствуют:
- 1x LEDVANCE 360DEG Wall Sensor device
4. Особенности продукта
- Stand-alone motion and light sensor for wall mounting.
- 360° detection field for comprehensive coverage.
- Optimized for energy saving.
- Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
- Zero-crossing circuit optimized for the operation of LED luminaires.
- IP55 protection type, suitable for outdoor use.
- Designed to be disassembled for separate control of internal light sources (if applicable).
5. Настройка и установка
The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

Рисунок 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

Рисунок 5.2: Крупный план view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.
5.1 Место установки
- Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
- Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
- Ensure the mounting surface is stable and can support the device's weight (250 grams).
5.2 Электрическое подключение
- ПРЕДУПРЕЖДЕНИЕ: Перед выполнением каких-либо электрических подключений отключите питание.
- Connect the sensor to a 230 Volt AC power supply.
- Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
- The zero-crossing circuit is optimized for LED luminaires.
6. Инструкция по эксплуатации
The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.
Режимы работы 6.1
The sensor features three selectable operating modes:
- Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
- Activation by Motion: The connected light turns on when motion is detected within the 360° field.
- Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.
Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.
6.2 Настройки обнаружения
The sensor allows for adjustment of the light duration after detection:
- Продолжительность света: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.
7. Техническое обслуживание
The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.
- Уборка: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
- Инспекция: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.
8. Поиск Неисправностей
If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:
- Свет не включается:
- Проверьте, подключен ли и активен ли источник питания.
- Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
- Убедитесь, что в зоне обнаружения нет препятствий.
- Adjust the sensitivity settings if available.
- Свет горит непрерывно:
- Check if the operating mode is set to 'Continuous Light On'.
- Ensure no constant motion is occurring within the detection zone.
- Light turns on unexpectedly:
- Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
- Adjust the sensor's sensitivity or detection range if possible.
Если проблема не устранена после применения этих решений, обратитесь в службу поддержки клиентов или к квалифицированному электрику.
9. Технические характеристики
| Бренд | ЛЕДВАНС |
| Номер модели | 4058075244832 |
| Код продукта | SENSOR WALL 360DEG IP55 DG LEDV |
| Размеры (Д x Ш x В) | 7.6 х 9.5 х 11.1 см |
| Масса | 250 грамм |
| Материал | Поликарбонат |
| Цвет | Черный |
| Томtage | 230 Вольт |
| Источник питания | AC |
| Рейтинг защиты | IP55 |
| Тип крепления | Настенное крепление |
| Поле обнаружения | 360 градусов |
| Max. Detection Distance | 10 метров |
| Режимы работы | Continuous On, Motion Activated, Twilight Activated |
| Light Duration Adjustment | 2 seconds to 15 minutes (approx.) |
| Совместимость типов ламп | ВЕЛ |
10. Гарантия и поддержка
The LEDVANCE 360DEG Wall Sensor comes with a 3-летняя гарантия производителя с даты покупки, распространяется на дефекты материалов и изготовления при нормальном использовании.
For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the LEDVANCE Brand Store.
Сохраните чек о покупке для гарантийных целей.





