Intex PureSpa Plus Portable Inflatable Hot Tub Spa

Введение

The Intex PureSpa Plus 28429E is a 4-person portable inflatable hot tub designed to provide relaxation and comfort. It features 140 high-performance bubble jets and a built-in heating system that can reach up to 104°F (40°C). This manual provides essential information for the safe and efficient setup, operation, and maintenance of your PureSpa Plus.

Важное примечание: В связи с ограничениями на энергоносители в Калифорнии, данный товар недоступен для продажи или доставки в Калифорнию.

Включенные компоненты

Перед началом настройки убедитесь, что все компоненты присутствуют:

• Надувная спа-ванна
• Изолированная крышка
• Heating / Filtration / Air Blower / Hard Water System Unit
• Меняющий цвет светодиодный свет
• Two Filter Cartridges
• Two Headrests
• Thermal Ground Cloth
• Шланг для накачки
• Сумка
• Floating Chlorine Dispenser
• Тест-полоска

Инструкции по установке

Follow these steps to set up your Intex PureSpa Plus:

1. Выберите местоположение: Select a flat, stable surface for your spa. Ensure it is capable of supporting the weight of the filled spa and occupants. Place the thermal ground cloth on the chosen surface.
2. Распаковать и развернуть: Carefully remove the spa tub and accessories from the carry bag. Unfold the spa tub on the thermal ground cloth.
3. Надуйте спа-бассейн: Connect the inflation hose to the spa's inflation valve and the built-in inflation system on the control unit. Inflate the spa until it is firm but not over-inflated.
4. Подключите блок управления: Attach the heating/filtration/air blower/hard water system unit to the spa tub following the instructions in the detailed manual. Ensure all connections are secure.
5. Залейте водой: Fill the spa with water using a garden hose. Do not exceed the maximum fill line.
6. Установка аксессуаров: Place the two headrests on the spa rim as desired. Insert the filter cartridges into their housings.

Инструкция по эксплуатации

The PureSpa Plus features an easy-to-use, tilt-adjustable control panel for managing its functions:

• Кнопка питания: Включает или выключает гидромассажную ванну.
• Регулировка температуры: Use the up and down arrows to set your desired water temperature, up to 104°F (40°C).
• Bubble Jet Activation: Press the bubble jet button to activate the 140 high-performance bubble jets for a refreshing massage.
• Система отопления: The heating system will automatically adjust to maintain the set temperature.
• Светодиодная лампа, меняющая цвет: Activate the integrated LED light to create a unique ambiance.

Обслуживание

Proper maintenance is crucial for the longevity and hygiene of your PureSpa Plus:

• Фильтрующие картриджи: Regularly check and clean the filter cartridges. Replace them as needed to ensure efficient filtration.
• Химия воды: Use the provided test strips to monitor water chemistry (pH, chlorine/bromine levels). Adjust chemicals using the floating chlorine dispenser to maintain safe and clean water.
• Подмены воды: It is recommended to change the spa water every 1 to 3 months, depending on usage.
• Уборка: Periodically clean the interior and exterior of the spa.

Поиск неисправностей

If you encounter issues with your Intex PureSpa Plus, refer to the following common problems and solutions:

• Код ошибки E95: This code typically indicates an issue with the heating system, often related to water temperature. Consult the full manual for specific diagnostic steps.
• Insufficient Bubbles: Check that the air blower is properly connected and that the air jets are not obstructed.
• Вода без отопления: Ensure the heating function is activated on the control panel and that the filter cartridges are clean. Verify power supply.

Технические характеристики

Официальные видеоролики о продуктах

Гарантия и поддержка

For warranty information, product support, or to purchase replacement parts, please refer to the official Intex website or contact Intex customer service directly. Keep your purchase receipt and model number handy for all inquiries.