TOWODE Motion Detectors

Руководство пользователя сигнализации с датчиком движения TOWODE

Бренд: TOWODE

Model: Motion Detectors

1. Введение

The TOWODE Motion Detector Alarm is a versatile security device designed to enhance safety in various environments such as homes, shops, offices, and garages. It features intelligent motion detection, multiple operating modes, adjustable volume levels, and a wide selection of alert sounds. This manual provides detailed instructions for setting up, operating, and maintaining your motion detector alarm.

TOWODE Motion Detector Alarm and Remote Control

Image: The TOWODE Motion Detector Alarm unit with its accompanying remote control.

2. Содержимое упаковки

Пожалуйста, проверьте наличие всех компонентов в упаковке:

Included components of the TOWODE Motion Detector Alarm

Image: All components included in the TOWODE Motion Detector Alarm package.

3. Настройка

3.1 Питание устройства

The motion detector alarm offers two power options:

  1. 3 батарейки типа ААА: Open the battery compartment on the back of the unit and insert three AAA batteries (not included), ensuring correct polarity. The low battery reminder function will alert you when replacement is needed.
  2. USB-кабель: Connect a Micro USB cable (not included) to the Micro USB port on the side of the unit and plug it into a DC5V power source.

The remote control is powered by 1 coin cell battery (included). Remove the insulation sheet from the remote control before first use.

Powering the motion detector with USB or AAA batteries

Image: The motion detector can be powered by either a Micro USB cable or 3 AAA batteries.

3.2 Установка

The motion detector can be flexibly installed using either the provided double-sided tape or screws:

Ensure the detection window faces the area you wish to monitor. The bracket allows for 180-degree rotation to adjust the sensing angle. For narrower sensing ranges, you can use the thin aluminum sticker to cover parts of the detection window.

Installation methods for the motion detector

Изображение: Бывшийamples of installing the motion detector using various methods.

4. Инструкция по эксплуатации

4.1 Включение/выключение питания

To power on or off the motion detector, long press the power button located on the top of the unit. You will hear an audible confirmation.

Режимы работы 4.2

The device features three operating modes, which can be cycled by short pressing the mode button on the top of the unit or using the remote control: