XPOWER AP-2000 Professional Portable HEPA Air Filtration System

Введение

The XPOWER AP-2000 is a professional-grade portable HEPA air filtration system designed for high-volume air exchanges in large commercial and industrial environments. This system efficiently remediates spaces contaminated by airborne pollutants, making it ideal for hospitals, schools, arenas, gyms, conference halls, and other large occupied areas. Its robust design and powerful performance ensure effective air scrubbing and dust control.

Figure 1: The XPOWER AP-2000 HEPA Air Filtration System, showcasing its compact and robust design with integrated casters for mobility.

Key features include a low 8.5 Amp draw for optimized job site power usage, a 2-speed switch for flexible operation at 1000 or 2000 CFM, and integrated carrying handles for easy transport. The unit is equipped with a framed HEPA filter and a dust control pre-filter for comprehensive air purification. It is ETL/CETL safety certified and meets OSHA safety requirements.

Настройка и сборка

Before operating your XPOWER AP-2000, ensure all components are present and assemble the caster system for mobility.

Распаковка и осмотр

• Аккуратно извлеките устройство из упаковки.
• Inspect the unit for any signs of shipping damage. If damage is found, contact your supplier immediately.
• Verify that all listed components are included.

Сборка системы роликов

The AP-2000 includes a 4-caster system (2 stationary, 2 swiveling) for enhanced maneuverability. Assembly is required.

1. Identify the two stationary casters and the two swiveling casters.
2. Attach the casters to the designated mounting points on the bottom of the unit using the provided hardware. Ensure they are securely fastened.
3. Once assembled, the unit can be easily moved through standard doorways.

Figure 2: The XPOWER AP-2000 with its caster system fully assembled, ready for transport.

Размещение и подключение питания

• Position the unit in the desired location, ensuring adequate clearance around the air intake and exhaust.
• Connect the power cord to the Power Supply Receptacle on the control panel.
• Plug the unit into a standard 115-volt electrical outlet. The unit draws 8.5 Amps.

Инструкция по эксплуатации

The XPOWER AP-2000 is designed for straightforward operation. Familiarize yourself with the control panel before use.

Рисунок 3: Крупный план view of the AP-2000 control panel, detailing the Power Supply Receptacle, Circuit Breaker, Power Switch, and Pressure Gauge.

Панель управления надview

• Power Supply Receptacle: Для подключения основного шнура питания.
• Circuit Breaker 10A: Protects the unit from electrical overload. If the unit stops working, check this breaker.
• Выключатель: Controls the unit's power and fan speed settings.
• Манометр: Indicates the air pressure within the system, which can be used to monitor filter status. A rising pressure reading typically indicates a clogged filter.

Запуск устройства

1. Убедитесь, что устройство правильно подключено к источнику питания.
2. Locate the Power Switch on the control panel.
3. Toggle the Power Switch to the desired fan speed setting:
   • Position 'I' for 1000 CFM (Cubic Feet per Minute) operation.
   • Position 'II' for 2000 CFM operation.
4. The unit will begin operating at the selected speed.

Выключение устройства

• To turn off the unit, toggle the Power Switch to the 'O' (Off) position.
• For extended storage or maintenance, unplug the unit from the power outlet.

Обслуживание

Regular maintenance of your XPOWER AP-2000 is crucial for optimal performance and longevity. This primarily involves monitoring and replacing the filters.

Система фильтров

The AP-2000 utilizes a multi-stage filtration system, including a dust control pre-filter and a framed HEPA filter.

Figure 4: The internal filter compartment of the AP-2000, showing the framed HEPA filter in place.

Monitoring Filter Status

• The Pressure Gauge on the control panel provides an indication of filter loading. As filters become clogged, the pressure reading will increase.
• Visually inspect the pre-filter regularly for excessive dust and debris accumulation.

Замена фильтра

Filters should be replaced when the pressure gauge indicates a significant increase, or when airflow noticeably decreases. The pre-filter will typically require more frequent replacement than the HEPA filter.

1. Убедитесь, что устройство выключено и отсоединено от источника питания.
2. Locate the filter access panel, typically at the intake side of the unit.
3. Carefully remove the old pre-filter and HEPA filter. Dispose of contaminated filters according to local regulations.
4. Insert new, genuine XPOWER replacement filters, ensuring they are seated correctly.
5. Secure the filter access panel.

Figure 5: The AP-2000 with its filter compartment open, showing the pre-filters and HEPA filter ready for replacement.

Генеральная уборка

• Протрите внешнюю поверхность устройства рекламойamp ткань. Не используйте агрессивные химикаты или абразивные чистящие средства.
• Ensure air intake and exhaust grilles are free from obstructions.

Поиск неисправностей

This section provides solutions to common issues you might encounter with your XPOWER AP-2000.

If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact XPOWER customer support.

Технические характеристики

Detailed technical specifications for the XPOWER AP-2000 Professional Portable HEPA Air Filtration System.

Figure 6: Dimensional drawing of the XPOWER AP-2000, indicating its length (40.2"), width (29"), and height (32.3").

Гарантия и поддержка

For information regarding product warranty, technical support, or replacement parts, please contact XPOWER Manufacture, Inc. directly.

• Производитель: Производство XPOWER, Inc.
• Webсайт: Visit the XPOWER Store on Amazon (for general product information and contact details)
• Please have your model number (AP-2000) and purchase date available when contacting support.

Additional protection plans may be available for purchase. Refer to your purchase documentation for details on extended warranty options.