1. Продукт закончилсяview
The Bytech 6FT LED Back Light Strip is designed to illuminate your hardware, providing vibrant multi-color lighting. This versatile LED strip is USB powered and controlled via a 24-key remote, offering 16 distinct colors and various lighting modes to enhance your viewопыт игры или ведения бизнеса.
Image 1.1: Bytech 6FT LED Back Light Strip product and packaging.
2. Информация по технике безопасности
- Ensure the power source is compatible with the USB power requirements of the LED strip.
- Do not expose the LED strip to water or excessive moisture as it is not water resistant. This product is intended for indoor use only.
- Avoid bending the LED strip sharply or applying excessive force, which may damage the internal circuitry.
- Хранить в недоступном для детей месте.
- Do not attempt to disassemble or modify the product. This will void any potential warranty.
- Unplug the LED strip from the power source before cleaning or when not in use for extended periods.
3. Содержимое упаковки
Проверьте комплектацию на наличие следующих предметов:
- 1 x Bytech 6FT LED Back Light Strip
- 1 x 24-кнопочный пульт дистанционного управления
4. Настройка и установка
- Подготовка поверхности: Ensure the surface where you intend to install the LED strip is clean, dry, and smooth. Dust, dirt, or moisture can affect the adhesive's effectiveness.
- Измерение и планирование: Before removing the adhesive backing, unroll the LED strip and temporarily position it to determine the best placement. The strip is 6 feet long.
- Очистить и приклеить: Carefully peel off the protective backing from the adhesive tape on the back of the LED strip. Begin sticking the strip to your desired surface, pressing firmly along its length to ensure good adhesion.
- Подключение к электросети: Locate the USB connector on the LED strip. Plug the USB connector into a compatible USB power source (e.g., a TV's USB port, a USB wall adapter, or a power bank).
- Тестовая функциональность: Once connected, the LED strip should light up. Use the remote control to test different colors and modes.
5. Инструкция по эксплуатации
The Bytech 6FT LED Back Light Strip is controlled using the included 24-key remote control. Ensure the remote has a clear line of sight to the LED strip's receiver.
Функции дистанционного управления:
| Кнопка | Функция |
|---|---|
| ВКЛ/ВЫКЛ | Включает или выключает светодиодную ленту. |
| Яркость вверх / вниз | Регулирует уровень яркости освещения. |
| Color Selection Buttons | Directly select from 16 static colors (e.g., Red, Green, Blue, White, various shades). |
| ВСПЫШКА | Activates a rapid flashing mode. |
| Строб | Activates a slow strobe effect. |
| ЧЕТКО | Cycles through colors with a smooth fading transition. |
| ГЛАДКИЙ; ПЛАВНЫЙ | Provides a gradual transition between colors. |
Примечание: The remote control requires a CR2025 button cell battery (not included). Please ensure the battery is inserted with the correct polarity.
6. Техническое обслуживание и уход
- Уборка: To clean the LED strip, first unplug it from the power source. Use a soft, dry cloth to gently wipe away dust or dirt. Do not use liquid cleaners or abrasive materials.
- Хранилище: If storing the LED strip for an extended period, ensure it is clean and dry. Coil it loosely to prevent damage to the strip or wiring. Store in a cool, dry place.
- Клей: The adhesive is designed for single application. Re-applying the strip multiple times may reduce its stickiness.
7. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Светодиодная лента не горит. | No power, loose connection, remote battery dead/incorrectly inserted. | Ensure USB is securely plugged into a working power source. Check remote battery and polarity. |
| Пульт дистанционного управления не работает. | Remote battery dead, no line of sight to receiver, remote too far. | Replace remote battery. Ensure remote is pointed directly at the strip's receiver. Move closer to the strip. |
| Свет мигает или светит нестабильно. | Insufficient power, damaged strip. | Try a different USB power source with sufficient output. Inspect the strip for visible damage. |
| Клей не держится. | Surface is dirty, oily, or textured; adhesive backing not fully removed. | Clean and dry the surface thoroughly before application. Ensure the protective film is completely removed. |
8. Технические характеристики
- Модель: BYOPCA217BK
- Бренд: Байтек
- Длина: 6 футов (приблизительно 1.83 метров)
- Тип источника света: ВЕЛ
- Источник питания: USB (проводной электрический)
- Метод контроля: 24-Key IR Remote Control
- Цвета: 16 static colors + various dynamic modes
- Использование внутри и снаружи помещений: В помещении
- Уровень водонепроницаемости: Не водостойкий
- Материал: Пластик
- Вес товара: 2.89 унций (приблизительно 82 граммов)
- СКП: 805112051533
9. Гарантия и поддержка
Warranty information for the Bytech 6FT LED Back Light Strip is not explicitly provided in the product specifications. For detailed warranty terms, technical support, or customer service inquiries, please contact the manufacturer, DEEJAYLED, or your point of purchase.
You may find contact information on the product packaging or the manufacturer's official webсайт.
