БЛС Т401

BLS T401 LED Motion Sensor Closet Light User Manual

Модель: T401

1. Информация по технике безопасности

Please read all instructions carefully before using the BLS T401 LED Motion Sensor Closet Light. Retain this manual for future reference.

  • Не подвергайте устройство воздействию экстремальных температур или прямых солнечных лучей.
  • Держите устройство подальше от воды и высокой влажности.
  • Не пытайтесь разбирать или модифицировать устройство. Это может привести к аннулированию гарантии и создать угрозу безопасности.
  • Для зарядки используйте только прилагаемый зарядный кабель или сертифицированный кабель USB-C.
  • Ensure the installation surface is clean and dry before attaching the light using adhesive methods.

2. Продукт закончилсяview

The BLS T401 LED Motion Sensor Closet Light is a versatile, rechargeable lighting solution designed for various indoor applications. It features a motion sensor for automatic illumination and a long-lasting battery.

BLS T401 LED Motion Sensor Closet Light

Figure 2.1: The BLS T401 LED Motion Sensor Closet Light, a sleek silver bar with a central motion sensor and light strip.

Основные характеристики:

  • Супер яркое освещение: 200 lumens with 6000K Clean White Glow.
  • Беспроводная установка: No hard wiring required.
  • Датчик движения: Automatically turns on when motion is detected in dark or low-light conditions.
  • Аккумуляторная батарея: Built-in 4500mAh UL certified battery for extended use.
  • Несколько вариантов монтажа: Magnetic attachment, 3M adhesive tape, or screws.
  • Двухрежимный переключатель: OFF, ON, and AUTO modes for flexible operation.
BLS T401 LED Motion Sensor Closet Light dimensions and motion detection range

Figure 2.2: Diagram illustrating the dimensions of the BLS T401 light (15.1 inches long, 0.9 inches wide, 0.98 inches high) and its 120-degree motion detection range up to 10 feet.

3. Настройка

The BLS T401 offers flexible installation options to suit various surfaces.

Методы установки:

  1. Магнитное крепление: The light has built-in strong magnets. It can be directly attached to any iron surface without additional mounting hardware.
  2. Клейкая лента: For non-magnetic surfaces, use the included 3M adhesive tape. Clean the desired surface thoroughly, peel off the protective film from the adhesive pads, attach them to the metal mounting brackets, and then firmly press the brackets onto the surface. Once the brackets are secure, the light can be magnetically attached to them.
  3. Винтовое крепление: For a more permanent installation, use the included screws. Mark the positions for the screws through the holes on the metal mounting brackets. Drill pilot holes if necessary, then secure the brackets with screws. Finally, attach the light magnetically to the installed brackets.
Four-step diagram showing installation of BLS T401 LED light using adhesive tape and magnetic attachment

Figure 3.1: Step-by-step guide for installing the light using adhesive tape and magnetic brackets, including an example of magnetic attachment to a refrigerator and under-cabinet placement.

4. Инструкция по эксплуатации

The BLS T401 features a sliding switch with three modes: OFF, ON, and AUTO.

Выбор режима:

  • OFF: Свет остается выключенным независимо от движения или окружающего освещения.
  • НА: The light stays continuously on.
  • АВТО: In this mode, the motion sensor activates the light. The light will turn on when it senses motion in both dark and low-light environments. It stays on as long as motion is detected nearby and automatically turns off 18 seconds after motion ceases. A built-in light sensor ensures the light stays off when the ambient environment is bright to conserve battery.

Регулировка датчика движения:

The sensitivity of the motion sensor can be adjusted by rotating the light on its magnetic base. Adjust the angle to achieve optimal lighting and motion detection for your specific environment.

Video 4.1: An official BLS LED video demonstrating the light's features, including its battery and motion sensor functionality.

5. Зарядка

The BLS T401 is equipped with a 4500mAh rechargeable lithium-ion battery.

Процесс зарядки:

  1. Locate the USB-C charging port on one end of the light.
  2. Connect the provided USB-C charging cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port).
  3. The charging indicator light will illuminate to show the charging status. Refer to the indicator light guide for specific details (usually red for charging, green for fully charged).
  4. A full charge can last up to 180 days in AUTO mode, based on 10 activations per day, 20 seconds each time.
Comparison of BLS T401 battery life with other LED lights

Figure 5.1: Visual comparison highlighting the BLS T401's 180-day run time with its large 4500mAh rechargeable battery versus other lights with smaller batteries requiring frequent charging.

6. Техническое обслуживание

To ensure optimal performance and longevity of your BLS T401 LED Motion Sensor Closet Light, follow these maintenance guidelines:

  • Уборка: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
  • Уход батареи: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
  • Хранилище: If storing the light for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.

7. Поиск Неисправностей

If you encounter any issues with your BLS T401, refer to the following common problems and solutions:

ПроблемаВозможная причинаРешение
В автоматическом режиме подсветка не включается.Insufficient ambient light (too bright), no motion detected, or low battery.Ensure the environment is dark enough for AUTO mode. Check for motion within the sensor's range. Recharge the battery.
Свет гаснет слишком быстро или горит слишком долго.Motion sensor sensitivity or placement.Adjust the angle of the light on its magnetic base to optimize sensor detection. Ensure no constant motion is within range if it stays on too long.
Свет тусклый или мерцает.Низкий заряд батареи.Полностью зарядите аккумулятор.
Свет не заряжается.Неисправный зарядный кабель или источник питания.Try a different USB-C cable and/or a different USB power source.

8. Технические характеристики

ОсобенностьДеталь
БрендБСТ
Номер моделиТ401
Тип источника светаВЕЛ
Яркость200 люмен
Цветовая температура6000 Kelvin (Clean White)
Емкость аккумулятора4500mAh Lithium Ion (UL Certified)
Источник питанияПитание от батареи
Размеры продукта15.1"Д x 0.9"Ш x 0.98"В
Вес товара8 унции
МатериалАкрилонитрил-бутадиен-стирол, алюминий
Метод контроляSlide Switch (OFF/ON/AUTO)
Диапазон датчика движенияUp to 10 feet, 120° detection angle
Тип установкиMagnetic, Adhesive, Screw Mount
Использование внутри и снаружи помещенийВ помещении

9. Гарантия и поддержка

BLS предлагает One Year Warranty & Lifelong Service for this product. Should you encounter any issues or have questions regarding your BLS T401 LED Motion Sensor Closet Light, please contact customer service via email at cuscare.blscollection@gmail.com. Please provide your order ID for efficient support. The manufacturer is committed to providing worry-free service.

Связанные документы - Т401

Предварительноview BLS HV25 Visor with Integrated Helmet - Technical Specification
Detailed technical specifications for the BLS HV25 visor, a high-protection helmet compatible with BLS 2700next and 2800next PAPRs, designed for industrial safety.
Предварительноview BLS 400/3 Celoobličejová maska: Technické údaje a vlastnosti
Podrobný přehled celoobličejové masky BLS 400/3, včetně jejích materiálů, technických specifikací, certifikací a vlastností pro bezpečnostní složky. Univerzální připojení RD-40 a vysoký ochranný faktor.
Предварительноview Руководство по эксплуатации козлов для распиловки бревен Forest Master BLS-3H
Подробное руководство по козлам для распиловки бревен Forest Master BLS-3H, включающее информацию о сборке, эксплуатации, безопасности и гарантии. Узнайте, как безопасно и эффективно распиливать несколько бревен.
Предварительноview Руководство пользователя USB-передатчика и приемника Bluetooth Shenzhen Bo Lian Sheng BLS-B55
Подробное руководство пользователя для Shenzhen Bo Lian Sheng BLS-B55 — универсального Bluetooth-передатчика, приёмника и USB-аудиоадаптера «3 в 1». Узнайте о настройке, режимах, технических характеристиках и соответствии требованиям FCC.
Предварительноview Руководство пользователя мини-стэка SpeedyBee F7 35A BLS V1.0
User manual for the SpeedyBee F7 35A BLS Mini Stack, detailing its specifications, dimensions, package contents, connection procedures, flight controller and ESC layout, peripheral connections, app usage for configuration and firmware updates, and technical parameters.
Предварительноview StagРуководство пользователя комплекта стойки освещения eworx BLS-315 Pro Lighting Stand B
Руководство пользователя для StagКомплект стойки освещения eworx BLS-315 Pro Lighting Stand B, в котором подробно описаны инструкции по технике безопасности, характеристики, эксплуатация, настройка, разборка, технические характеристики и правила утилизации в соответствии с экологическими требованиями.