Введение
The Henry Xtra 160 HVX160 is a versatile and powerful canister vacuum cleaner designed for efficient cleaning of various surfaces. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Henry Xtra 160 vacuum.
Figure 1: The NaceCare Henry Xtra 160 Canister Vacuum with hose and floor tool.
Основные характеристики:
- Powerful 680 watt motor (0.9 HP) for strong suction.
- Includes Turbo Brush for effective carpet cleaning and hair pickup.
- Specialist hard-floor tool for optimal performance on hard surfaces.
- MicroTex filters provide 99.97% filtration down to 0.3 micron for improved air quality.
- Large 1.6 gallon capacity for extended cleaning sessions.
- Whisper quiet operation, suitable for various environments.
- Self-seal tab on bags for dust-free emptying.
- Convenient on-board accessory storage.
Важная информация по безопасности
Перед использованием прибора всегда внимательно читайте и усвойте все предупреждения и инструкции по технике безопасности. Несоблюдение предупреждений и инструкций может привести к поражению электрическим током, пожару и/или серьезным травмам.
- Не используйте прибор, если шнур питания или вилка повреждены.
- Не собирайте легковоспламеняющиеся или горючие жидкости, такие как бензин, и не используйте их в местах, где они могут находиться.
- Не поднимайте ничего горящего или дымящегося, например, сигареты, спички или горячий пепел.
- Не позволяйте детям пользоваться пылесосом.
- Всегда отключайте пылесос от сети перед выполнением любых работ по обслуживанию или чистке.
- Перед началом работы убедитесь в правильной установке всех фильтров.
Настройка и сборка
1. Распаковка:
Carefully remove all components from the packaging. Retain packaging for future storage or transport. Verify that all parts listed in the "What's in the Box" section are present.
2. Attaching the Hose:
- Locate the flexible hose.
- Insert the hose cuff into the suction inlet on the front of the vacuum unit until it clicks securely into place.
3. Assembling the Wand and Floor Tool:
- Connect the two chrome wand sections together.
- Attach the curved handpiece to the top of the assembled wand.
- Select the desired floor tool (Turbo Brush for carpets or hard-floor tool for hard surfaces).
- Attach the chosen floor tool to the bottom of the assembled wand.
- Insert the curved handpiece into the end of the flexible hose.
Figure 2: The Henry Xtra 160 vacuum shown with its comprehensive accessory kit, including hose, wands, and various floor tools.
4. Installing the Dust Bag:
The Henry Xtra 160 uses disposable dust bags. Ensure a bag is correctly installed before operation.
- Unclip and remove the motor head from the canister.
- Ensure the MicroTex filter is properly seated.
- Slide the cardboard collar of a new dust bag onto the inlet tube inside the canister. Ensure the bag is fully open and positioned correctly within the canister.
- Replace the motor head, ensuring it is securely clipped.
Операция
1. Включение/выключение:
Plug the power cord into a suitable electrical outlet. The Henry Xtra 160 features an automatic cord rewind system. To operate, press the red ON/OFF switch located on the top of the motor head.
2. Using the Floor Tools:
- Turbo Brush: Ideal for carpets and picking up pet hair. The air-driven brush agitates carpet fibers for deeper cleaning.
- Hard-Floor Tool: Designed for optimal suction and maneuverability on hard surfaces such as wood, tile, and laminate.
Figure 3: The Henry Xtra 160's Turbo Brush effectively cleaning a carpeted surface.
Figure 4: The Henry Xtra 160's hard-floor tool efficiently cleaning debris from a tiled floor.
3. Использование аксессуаров:
The Henry Xtra 160 comes with a variety of accessories for different cleaning tasks. These can be attached directly to the curved handpiece or the wand.
- Щелевая насадка: Для узких пространств, углов и кромок.
- Щетка для пыли: For delicate surfaces, shelves, and upholstery.
- Насадка для обивки: For furniture and fabric surfaces.
Обслуживание
Regular maintenance ensures optimal performance and extends the life of your Henry Xtra 160 vacuum.
1. Replacing the Dust Bag:
Replace the dust bag when it is full or when suction power noticeably decreases. The self-seal tab on the bag ensures dust-free disposal.
- Отключите пылесос от розетки.
- Unclip and remove the motor head.
- Carefully pull the cardboard collar of the full dust bag off the inlet tube. Use the self-seal tab to close the bag opening.
- Dispose of the full bag responsibly.
- Install a new dust bag as described in the "Setup and Assembly" section.
- Замените головку двигателя.
2. Очистка фильтров:
The MicroTex filter provides excellent filtration. Periodically check and clean the filter to maintain suction and air quality.
- Отключите пылесос.
- Снимите головку двигателя.
- Gently remove the MicroTex filter.
- Tap the filter gently over a waste bin to dislodge dust. Do not wash the filter unless specified by the manufacturer.
- Reinstall the filter, ensuring it is correctly seated before replacing the motor head.
3. Cleaning the Turbo Brush:
Hair and debris can become tangled around the brush roll. Regularly inspect and clean the brush roll for optimal performance.
- Unplug the vacuum and detach the Turbo Brush from the wand.
- Using scissors, carefully cut away any tangled hair or threads from the brush roll.
- Уберите мусор.
4. Генеральная уборка:
Протрите внешнюю поверхность пылесоса рекламой.amp Ткань. Не используйте абразивные чистящие средства или растворители.
Поиск неисправностей
If you encounter issues with your Henry Xtra 160, refer to the table below for common problems and their solutions.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Пылесос не включается. | Нет электропитания. Выключите питание. | Проверьте, надежно ли вилка вставлена в розетку. Ensure the ON/OFF switch is pressed. Проверьте предохранитель/автоматический выключатель в электросети. |
| Потеря всасывания. | Полный пылесборник. Clogged hose/wand/tool. Грязный фильтр. | Заменить мешок для пыли. Check and clear any blockages in the hose, wand, or floor tool. Clean or replace the MicroTex filter. |
| Необычный шум во время работы. | Obstruction in brush roll (Turbo Brush). Свободный компонент. | Inspect and clear any debris from the Turbo Brush roll. Ensure all attachments and the motor head are securely fitted. |
| Пыль выходит из вакуума. | Dust bag not installed correctly or damaged. Фильтр установлен неправильно. | Check dust bag installation; replace if damaged. Ensure MicroTex filter is correctly and securely in place. |
Технические характеристики
- Модель: 908423
- Бренд: Нуматик
- Производитель: NaceCare
- Размеры продукта: 19 x 22 x 16 дюйма
- Вес товара: 18 фунта
- Мощность двигателя: 680 watts (0.9 HP)
- Тип фильтра: HEPA Filter (MicroTex)
- Включенные компоненты: Accessory Kit (Hose, Wands, Turbo Brush, Hard-Floor Tool, Crevice Tool, Dusting Brush, Upholstery Nozzle)
- Особая особенность: Автоматическая перемотка шнура
- Беспроводной: Нет
Гарантия и поддержка
Информация о гарантии:
For specific warranty details, please refer to the warranty card included with your product or contact NaceCare customer service. Keep your proof of purchase for warranty claims.
Служба поддержки клиентов:
If you require further assistance or have questions not covered in this manual, please contact NaceCare customer support. Contact information can typically be found on the manufacturer's webсайте или на упаковке продукта.
