Cable Matters 104066x2

Cable Matters 1000BASE-SX SFP to LC Multimode 1G Fiber Transceiver Module

Модель: 104066x2

Введение

This manual provides essential information for the proper installation, operation, and maintenance of your Cable Matters 1000BASE-SX SFP to LC Multimode 1G Fiber Transceiver Module. This module is designed to connect network switches, servers, NICs, and media converters with an SFP port to a Gigabit fiber network, offering reliable short-reach links over duplex LC multimode fiber.

Cable Matters 1000BASE-SX SFP module installed in a network switch, connected via LC fiber cables.

Image: The Cable Matters 1000BASE-SX SFP module installed in an SFP port of a network switch, with two LC multimode fiber cables connected. This illustrates the primary use case of the transceiver.

Основные характеристики

  • High-Performance LC SFP Module: Provides standards-based 1000BASE-SX Gigabit Ethernet over duplex LC multimode fiber for reliable short-reach links.
  • Universal MSA Compatibility: Works with MSA-compliant equipment from various brands including Cisco, HPE Aruba, Ubiquiti, MikroTik, Fortinet, Meraki, Huawei, Netgear, TP-Link, D-Link, and Supermicro. Supports DDM/DOM (SFF-8472). Note: Not compatible with proprietary vendor-locked SFP ports.
  • Energy-Efficient & Hot-Pluggable: Designed for low power consumption (<0.5 W) and minimal EMI emissions. Features a hot-pluggable design with built-in ESD protection for safe installation and removal.
  • Reliable Gigabit Transmission: Supports up to 1.25 Gbps line rate at an 850 nm (VCSEL). Achieves up to 550m on 50/125µm (OM2/OM3/OM4) and up to 275m on 62.5/125µm (OM1) over 1000BASE-SX. Fully compliant with IEEE 802.3z 1000BASE-SX, SFP MSA (INF-8074i).
  • Удобная упаковка из 2 штук: Each package includes two LC fiber SFP modules for scalable deployment and maintenance.
Diagram showing the internal components of the SFP module, highlighting gold-plated contacts, premium IC, bail clasp latch, and protective dust cap.

Изображение: взорванный view of the SFP module, illustrating its internal components such as gold-plated contacts, a premium integrated circuit for stable signals, a bail clasp latch for easy insertion/removal, and a protective dust cap. This highlights the design for reliability and ease of use.

Настройка и установка

  1. Подготовка: Ensure your network device (switch, server, NIC, media converter) has an available SFP port. Confirm that the device is powered off or that the SFP port supports hot-plugging. Always handle the SFP module carefully and use anti-static protection to prevent electrostatic discharge (ESD) damage.
  2. Вставьте модуль SFP: Gently slide the SFP module into the designated SFP port on your network device until it clicks into place. Ensure the module is fully seated.
  3. Connect Fiber Optic Cables: Remove the protective dust caps from both the SFP module's LC ports and your LC multimode fiber optic cables. Connect the LC connectors of your multimode fiber cable to the corresponding LC ports on the SFP module. Ensure a secure connection.
  4. Power On/Verify: If you powered off your device, power it back on. The SFP module should be detected automatically. Check the link status indicators on your network device for a successful connection.
Illustration of an SFP module being inserted into a network switch port, with fiber cables ready for connection.

Image: A visual representation of the SFP module being inserted into a network switch, demonstrating the hot-pluggable nature and the connection points for LC multimode fiber cables. This highlights the ease of installation.

Инструкция по эксплуатации

The Cable Matters 1000BASE-SX SFP module is designed for plug-and-play operation. Once correctly installed and connected to compatible fiber optic cables and network devices, it will automatically establish a Gigabit Ethernet link.

  • Статус ссылки: Observe the LED indicators on your network switch or device. A solid green or amber light typically indicates a successful link. Refer to your network device's manual for specific LED interpretations.
  • Передача данных: The module supports full-duplex Gigabit Ethernet data transmission at 1.25 Gbps.
  • DDM/DOM Support: The module supports Digital Diagnostic Monitoring (DDM) / Digital Optical Monitoring (DOM) as per SFF-8472. This allows for real-time monitoring of parameters such as optical output power, optical input power, laser bias current, temperature, and transceiver supply voltage, if supported by your network device.

Совместимость

This SFP module is designed for broad compatibility with MSA (Multi-Source Agreement) compliant equipment. It is verified to work with devices from leading brands:

  • Циско
  • HPE Aruba
  • Вездесущий
  • МикроТик
  • Фортинет
  • Мераки
  • Хуавей
  • Netgear
  • TP-Link
  • D-Link
  • Супермикро
  • And other MSA-compliant SFP ports.

Важное примечание: This module is specifically for 1G SFP ports and is not compatible with 10G-Only SFP+ ports. It is also not designed for proprietary vendor-locked SFP ports that require specific vendor coding.

Image showing the SFP module surrounded by logos of compatible brands like Cisco, Ubiquiti, TP-Link, Netgear, Supermicro, MikroTik, D-Link, and HPE Aruba.

Image: The Cable Matters SFP module prominently displayed, encircled by the logos of various compatible network equipment manufacturers, including Cisco, Ubiquiti, TP-Link, Netgear, Supermicro, MikroTik, D-Link, and HPE Aruba. This visually confirms its broad MSA compatibility.

Технические характеристики

ОсобенностьСпецификация
Модель104066x2
Форм-факторSFP (Small Form-Factor Pluggable)
Скорость передачи данных1.25 Gbps (Gigabit Ethernet)
Длина волны850 nm (VCSEL)
Тип разъемаДуплекс LC
Тип волокнаМногомодовое волокно (MMF)
Max Reach (50/125µm OM2/OM3/OM4)До 550 метров
Max Reach (62.5/125µm OM1)До 275 метров
Потребляемая мощность<0.5 Вт
СогласиеIEEE 802.3z 1000BASE-SX, SFP MSA (INF-8074i)
Особые возможностиHot-pluggable, ESD protection, DDM/DOM support
Размеры (приблизительные)5.9 см (Д) x 1.4 см (Ш) x 1.2 см (В) / 2.4 дюйма (Д) x 0.6 дюйма (Ш) x 0.5 дюймов (В)
Масса0.05 Килограмма
Graphic displaying key technical specifications: 1.25 Gbps line rate, MMF fiber type, 850nm wavelength, 550m max reach, and less than 0.5W power consumption.

Image: A visual summary of the SFP module's technical specifications, including line rate (1.25 Gbps), fiber type (MMF), wavelength (850nm), maximum reach (550m), and power consumption (<0.5W). This provides a quick overview of its performance capabilities.

Image showing two SFP modules with dimensions labeled: 2.4 inches (5.9 cm) length, 0.6 inches (1.4 cm) width, and 0.5 inches (1.2 cm) height.

Image: Two SFP modules are shown side-by-side with their approximate dimensions indicated: 2.4 inches (5.9 cm) in length, 0.6 inches (1.4 cm) in width, and 0.5 inches (1.2 cm) in height. This provides a clear understanding of the physical size of the modules.

Поиск неисправностей

  • Индикатор соединения не горит:
    • Ensure the SFP module is fully seated in the port.
    • Verify that the fiber optic cables are correctly connected and not damaged.
    • Confirm that both ends of the fiber connection are using compatible multimode SFP modules (1000BASE-SX).
    • Check if the SFP port on your network device is enabled and configured correctly (e.g., not set to 10G-only).
    • Ensure you are using multimode fiber (OM1, OM2, OM3, OM4) and not single-mode fiber.
  • Прерывистое соединение:
    • Inspect fiber cable connectors for dirt or damage. Clean them if necessary.
    • Ensure the fiber cable length does not exceed the maximum supported distance for your fiber type (e.g., 550m for OM3/OM4, 275m for OM1).
    • Check for excessive bends or kinks in the fiber cable.
  • Модуль не распознан:
    • Confirm your network device's SFP port is MSA-compliant and not vendor-locked.
    • Try inserting the module into a different SFP port or a different compatible device to isolate the issue.
    • Restart the network device after inserting the module.

Обслуживание

  • Содержать в чистоте: Always keep the protective dust caps on the SFP module's LC ports when not in use. Dust and debris can significantly degrade optical performance.
  • Обращаться с осторожностью: Avoid touching the optical interfaces of the module or fiber cables. Oils from skin can cause signal degradation.
  • Хранилище: Store the SFP modules in a cool, dry environment, away from direct sunlight and extreme temperatures.
  • Защита от электростатического разряда: When handling the module, especially during installation or removal, use appropriate electrostatic discharge (ESD) precautions, such as an anti-static wrist strap.

Гарантия и поддержка

Продукция Cable Matters разработана для обеспечения надежности и высокой производительности. Для получения информации о гарантии и технической поддержке обращайтесь на официальный сайт Cable Matters. webили обратитесь в службу поддержки напрямую. Сохраните чек о покупке для предъявления гарантийных претензий.

Для получения дополнительной помощи посетите Магазин Cable Matters на Amazon.

Связанные документы - 104066x2

Предварительноview Сетевой адаптер Cable Matters Thunderbolt 3 10 Гбит/с Ethernet (модель 107017) — руководство пользователя и инструкция по установке.
Полное руководство пользователя для адаптера Cable Matters Thunderbolt 3 to 10 Gigabit Ethernet (модель 107017). Включает описание характеристик продукта, инструкции по установке для Windows и macOS, настройку сети, устранение неполадок, технические характеристики и информацию о гарантии.
Предварительноview Адаптер Cable Matters USB-C на 4-портовый гигабитный Ethernet (модель 201069) — установка и технические характеристики.
Подробное руководство по адаптеру Cable Matters USB-C на 4 порта Gigabit Ethernet (модель 201069), включая инструкции по установке, устранению неполадок, технические характеристики, гарантию и информацию о поддержке. Обеспечивает надежное сетевое соединение.
Предварительноview Руководство пользователя многопортового адаптера Cable Matters Thunderbolt 3 с двумя портами HDMI 4K, USB и Gigabit Ethernet (модель 107016)
Руководство пользователя многопортового адаптера Cable Matters Thunderbolt 3 (модель 107016) с подробным описанием его характеристик, системных требований, инструкциями по подключению двух дисплеев 4K, Gigabit Ethernet, USB-устройств и советами по устранению неполадок. Включает технические характеристики и информацию о гарантии.
Предварительноview Руководство пользователя адаптера Cable Matters USB 3.0 — HDMI с гигабитным Ethernet
Руководство пользователя для адаптера Cable Matters USB 3.0 — HDMI с гигабитным Ethernet (модель 202052). Содержит подробные инструкции по установке, подключению, настройке для Windows и macOS, устранению неполадок, техническим характеристикам, гарантии и поддержке.
Предварительноview Руководство пользователя многопортового адаптера Cable Matters Thunderbolt 3 с двумя DisplayPort 4K при 60 Гц, USB и Gigabit Ethernet
Руководство пользователя многопортового адаптера Cable Matters Thunderbolt 3 (модель 107015). В этом руководстве описаны характеристики устройства, системные требования, инструкции по подключению двух мониторов DisplayPort 4K с частотой 60 Гц, устройств Gigabit Ethernet и USB 3.0, а также советы по устранению неполадок в Windows и macOS.
Предварительноview Многопортовый адаптер Cable Matters USB-C с DisplayPort 8K и поддержкой PD | Совместимость с Thunderbolt 4/USB4
Расширьте свои возможности подключения с помощью многопортового адаптера Cable Matters USB-C. Оснащен портами DisplayPort 8K, Power Delivery (100 Вт), Gigabit Ethernet и USB 2.0. Совместим с устройствами Thunderbolt 4 и USB4.