JOYHILL 5 Gallon Water Bottle Dispenser Instruction Manual

Введение

Спасибо за покупкуasing the JOYHILL 5 Gallon Water Bottle Dispenser. This portable and convenient water pump is designed for easy access to drinking water from 3 and 5-gallon bottles, suitable for home, kitchen, office, and outdoor activities like campинж.

Компоненты продукта

The JOYHILL Water Bottle Dispenser typically includes the following components:

• Главный насосный агрегат
• 304 Stainless steel outlet pipe (spout)
• Food-grade silicone hose
• Кабель для зарядки Micro USB

Image: The JOYHILL water bottle dispenser attached to a large water bottle, with water flowing into a glass. A hand is shown pressing the power button on top of the dispenser.

Инструкции по установке

1. Install the Outlet Pipe: Insert the stainless steel outlet pipe into the designated hole on the top of the pump unit. Ensure it is firmly in place.

   

   Image: A person's hands installing the curved stainless steel spout into the main pump unit.

2. Присоедините силиконовый шланг: Connect the food-grade silicone hose to the bottom inlet of the pump unit. Make sure it is securely attached to prevent leaks.

   

   Image: A person's hands attaching the clear silicone hose to the underside of the pump unit.

3. Place on Water Bottle: Insert the silicone hose into your 3 or 5-gallon water bottle. Place the pump unit securely on top of the bottle's neck. Ensure the pump fits snugly over the bottle opening (suitable for 2.16-inch / 5.5 cm neck diameter). For 5-gallon bottles, preparing a bottle cap can help ensure stability.

   

   Image: A person placing the assembled water pump onto the neck of a large water bottle.

Инструкция по эксплуатации

1. Включение/выключение питания: Press the power button on the top of the dispenser to start or stop water flow. The pump features a one-switch operation for ease of use.

   

   Image: A hand pressing the illuminated button on top of the water dispenser, indicating operation.

2. Автоматическое отключение: The pump will automatically stop pumping water after 60 seconds to prevent wastage. This feature ensures efficient water dispensing.

3. Зарядка: When the battery is low, connect the supplied micro USB cable to the charging port on the pump and to a standard USB power adapter (not included). A red light indicates charging, and the light will turn off when fully charged. Avoid using fast chargers to prevent damage.

   

   Image: An illustration showing the pump's 1200mAh battery, USB charging port, and indicator lights for working (blue), charging (red), and full charge (light off).

Видеодемонстрация продукта:

Обслуживание

To ensure the longevity and hygiene of your water dispenser, follow these maintenance tips:

• Уборка: Regularly clean the stainless steel spout and silicone hose with warm, soapy water. Rinse thoroughly.
• Avoid Frequent Plugging/Unplugging: To prevent leakage, avoid frequently plugging and unplugging the stainless steel pipe from the pump unit.
• Уход за зарядкой: Always use the provided micro USB cable for charging. Do not use fast charger heads, as this can damage the charging port.

Поиск неисправностей

Проблема	Возможная причина	Решение
Вода не подается / Слабый напор	Low battery; Silicone hose kinked or blocked; Pump not securely attached to bottle.	Charge the pump; Check and straighten the hose; Re-secure the pump on the bottle.
Утечка	Improper installation of spout or hose; Damaged silicone seal.	Ensure all connections (spout, hose) are tight and properly seated. If the issue persists, check the food-grade silicone seal inside the spout connection point. Reassemble the seal if it's dislodged. Image: Step 1 of leak troubleshooting, showing how to grasp and remove the stainless steel pipe. Image: Step 2 of leak troubleshooting, showing the separated food-grade silicone and ABS components. Image: Step 3 of leak troubleshooting, demonstrating how to separate the food-grade silica gel from the ABS part. Image: Step 4 of leak troubleshooting, showing the reassembly of the food-grade adhesive into the ABS and resetting the waterproof sleeve.
Pump not charging	Faulty cable; Incompatible charger; Charging port damage.	Try a different micro USB cable; Ensure charger output is compatible (1.2A to 2A recommended); Contact support if port is damaged.

Технические характеристики

Гарантия и поддержка

For any installation or quality issues within 120 days of purchase, please inform us. We are committed to providing satisfactory solutions.

For further assistance, please visit the official JOYHILL Store on Amazon: JOYHILL Amazon Store.

Более подробную информацию вы также можете получить в официальном руководстве пользователя (PDF): Руководство пользователя (PDF).