Введение
This manual provides instructions for the installation and use of the Comelit 1126W/OK Intercom Push Button. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance.
Продукт болееview
The Comelit 1126W/OK is a white RAL 9010 push button designed for integration into an intercom system. It is intended to be inserted into the intercom base by removing the existing cover cap and occupies the space of one module.
Изображение 1: Components of the Comelit 1126W/OK Intercom Push Button. This image displays the main button module with screw terminals, a clear plastic cap, and a white plastic cap, illustrating the individual parts for assembly.
Настройка и установка
- Подготовка: Ensure the intercom system's power supply is disconnected before beginning installation to prevent electrical hazards.
- Найдите слот для установки: Identify the designated slot in your intercom base where the push button will be installed. This slot typically has a cover cap that needs to be removed.
- Remove Cover Cap: Carefully remove the existing cover cap from the intercom base.
- Проводка: Connect the necessary wires from the intercom system to the terminals on the back of the 1126W/OK push button module. Refer to your intercom system's wiring diagram for specific connections (e.g., 'S' for signal, '+' for power). Ensure secure connections.
- Insert Push Button: Gently insert the wired push button module into the vacant slot in the intercom base until it clicks securely into place. Ensure it is flush with the intercom panel.
- Включение питания: Once the button is securely installed and wired, reconnect the power supply to the intercom system.
Примечание: If you are unsure about the wiring process, it is recommended to consult a qualified electrician or refer to the specific wiring diagram of your intercom system.
Инструкция по эксплуатации
The Comelit 1126W/OK push button functions as a standard call button for your intercom system.
- Инициирование звонка: To initiate a call to the indoor unit, simply press the button firmly.
- Подтверждение: Depending on your intercom system, you may hear an audible confirmation tone or see a visual indicator (e.g., an LED light) confirming the call has been placed.
Обслуживание
The Comelit 1126W/OK push button requires minimal maintenance.
- Уборка: Periodically wipe the surface of the button with a soft, damp Ткань. Избегайте использования абразивных чистящих средств и растворителей, так как они могут повредить покрытие.
- Инспекция: Occasionally check for any loose connections or physical damage. If any damage is observed, disconnect power and address the issue or contact support.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Button does not respond when pressed. |
|
|
| Call is initiated but no audio/video from intercom. |
|
|
Технические характеристики
- Бренд: Комелит
- Модель: 1126W/OK
- Размеры продукта: 0.03 x 0.03 x 0.03 см (примерно 0.01 x 0.01 x 0.01 дюйма)
- Вес товара: 4.54 грамм (приблизительно 0.16 унции)
- Цвет: Белый (RAL 9010)
- ASIN: B07HNFQRLZ
- Первая доступная дата: 25 сентября 2018 г.
Информация о гарантии
Warranty information for the Comelit 1126W/OK Intercom Push Button is not available in the provided product data. Please refer to the manufacturer's official website or contact your retailer for specific warranty details.
Поддерживать
For technical assistance or further inquiries regarding the Comelit 1126W/OK Intercom Push Button, please contact Comelit customer support or your authorized dealer. Contact details are typically available on the official Comelit webсайт.
You can visit the official Comelit webсайт для получения дополнительной информации: www.comelitgroup.com
