Инструкция по эксплуатации универсального настольного крепления для монитора RICOO TS2711

1. Введение

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your RICOO TS2711 Universal Monitor Desk Mount. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are crucial for optimal performance and safety.

2. Информация по технике безопасности

• Ensure that the mounting surface (desk) can support the combined weight of the monitor arm and your monitor.
• Не превышайте максимально допустимый вес 8 кг (17.6 фунтов).
• Verify that your monitor's VESA mounting pattern is compatible (75x75mm or 100x100mm).
• Always use the provided hardware. If any parts are missing or damaged, contact customer support.
• Perform installation with care to prevent injury or damage to equipment. It is recommended to have assistance during monitor attachment.
• Не допускайте детей и домашних животных к месту установки.

3. Содержимое упаковки

Перед началом установки проверьте наличие всех компонентов:

• Сборка кронштейна монитора
• Письменный стол Clamp База
• Табличка VESA
• Крепежные элементы (винты, шайбы, прокладки)
• Tools (Allen keys)
• Руководство по эксплуатации

Изображение 3.1: оконченоview of the RICOO TS2711 Monitor Desk Mount components.

4. Технические характеристики

Image 4.1: Visual representation of VESA compatibility (75x75mm, 100x100mm) and supported screen sizes (13-30 inches).

Image 4.2: Technical drawing illustrating the dimensions and range of motion for the TS2711 monitor arm.

5. Настройка и установка

5.1 рабочий столamp Установка

1. Прикрепите стол clamp основание к основному полюсу кронштейна монитора.
2. Расположите clamp on the edge of your desk. Ensure the desk thickness is between 10mm and 88mm for secure attachment.
3. Затяните крепление.amp screw firmly until the arm is stable on the desk. Do not overtighten.

5.2 Крепление для монитора

1. Carefully lay your monitor face down on a soft, clean surface.
2. Identify the VESA mounting holes on the back of your monitor.
3. Attach the VESA plate to the back of your monitor using the appropriate screws and washers from the hardware kit. For curved monitors or monitors with recessed VESA holes, use the provided spacers if necessary.
4. With assistance, lift the monitor with the attached VESA plate and slide it onto the monitor arm's mounting head.
5. Закрепите монитор на кронштейне, затянув фиксирующий винт на головке VESA.

Image 5.1: The RICOO TS2711 monitor arm securely installed on a desk with a monitor.

5.3 Управление кабелями

The monitor arm features integrated cable clips to keep your workspace tidy.

1. Route your monitor's power and video cables along the arm.
2. Use the provided cable clips to secure the cables to the underside of the arm and along the main pole.
3. Убедитесь, что кабели имеют достаточную длину, чтобы обеспечить полный диапазон движений без натяжения.

Image 5.2: Detail of the cable management system, showing how cables can be routed along the arm for a clean setup.

6. Инструкция по эксплуатации (регулировка)

The RICOO TS2711 monitor arm offers various adjustment options to customize your viewопыт.

6.1 Регулировка высоты

To adjust the monitor height, loosen the collar on the main pole, slide the arm to the desired height, and then firmly tighten the collar to secure the position.

Image 6.1: Illustration of the height adjustment feature, allowing the monitor to be moved up or down along the main pole.

6.2 Swivel, Tilt, and Rotation

The arm allows for flexible positioning of your monitor:

• Поворотный: The arm joints allow for 180-degree swivel, and the VESA plate can swivel 360 degrees, enabling you to position your monitor left or right.
• Наклон: The monitor can be tilted +/- 45 degrees to reduce glare and find the optimal viewугол наклона.
• Вращение: The VESA plate supports 360-degree rotation, allowing you to switch between landscape and portrait orientations.

Adjustments can be made by gently moving the monitor to the desired position. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.

Image 6.2: Demonstrates the monitor's ability to swivel up to 180 degrees, tilt up to 90 degrees, and rotate 360 degrees.

7. Техническое обслуживание

• Уборка: Протрите кронштейн монитора мягкой тряпкой.amp Ткань. Избегайте использования абразивных чистящих средств и растворителей.
• Периодические проверки: Регулярно проверяйте все винты и соединения, чтобы убедиться в их надежности и прочности. При необходимости подтяните их.
• Смазка: No lubrication is required for the moving parts.

8. Поиск Неисправностей

• Монитор провисает или не удерживает положение: The tension in the arm joints may need adjustment. Use the provided Allen key to tighten the screws at the joints until the monitor holds its position firmly.
• Arm is Too Stiff to Move: The tension in the arm joints may be too high. Use the provided Allen key to slightly loosen the screws at the joints until the arm moves smoothly.
• Письменный стол Clamp находится на свободе: Убедитесь, что стол чистыйamp screw is fully tightened against the desk surface. Verify that the desk thickness is within the supported range.
• Monitor Not Level: Adjust the tilt mechanism or the VESA plate rotation to level the monitor.

9. Гарантия и поддержка

For warranty information, please refer to the documentation included with your product or visit the official RICOO website. If you encounter any issues or require technical assistance, please contact RICOO customer support through their official channels or the retailer where the product was purchased.