Инструкция по эксплуатации карманного УФ-АБ эксехометра Extech UV505.

1. Введение

The Extech UV505 is a compact, portable UV-AB light meter designed for measuring ultraviolet radiation from both natural and artificial light sources. This device is suitable for various applications including outdoor UV exposure assessment, medical testing, laboratory research, industrial quality control, educational purposes, electronics, and forensic investigations. It features a backlit display, a cosine-corrected sensor for accurate readings, two selectable measurement ranges, a zero adjustment function, data hold, and an automatic power-off feature to conserve battery life.

2. Особенности продукта

• Компактная и портативная конструкция: Easily fits in a hand or pocket for convenient on-the-go monitoring in various environments.
• UVA and UVB Measurement: Dual-sensor technology enables simultaneous and accurate tracking of both UVA and UVB light intensity.
• Data Capture Functions: Includes Peak Hold, Min/Max, and real-time readings to analyze fluctuations and critical UV peaks.
• ЖК-дисплей с подсветкой: Large, easy-to-read screen with backlight for clear visibility in diverse lighting conditions.
• Прочная конструкция: Rugged design ensures reliable performance in field and laboratory settings.
• Автоматическое выключение: Automatically shuts off to preserve battery life during extended use.
• Cosine Corrected Sensor: Provides accurate measurements regardless of the angle of incidence of the UV light.

3. Содержимое упаковки

Убедитесь, что все предметы присутствуют и находятся в хорошем состоянии:

• Extech UV505 Pocket UV-AB Light Meter
• Two AAA batteries (pre-installed or included separately)
• Защитный чехол

4. Идентификация компонентов

Рисунок 1: Передняя часть view of the Extech UV505 Pocket UV-AB Light Meter, showing the UV sensor, LCD display, and control buttons.

Figure 2: The Extech UV505 meter being held in a hand, demonstrating its portable size and outdoor usability.

The Extech UV505 features a UV sensor at the top, a large LCD display in the center, and several control buttons below the display. The main power button is typically orange and centrally located. Other buttons include ZERO, UNIT, and a backlight button (often indicated by a light bulb icon) and a HOLD button (indicated by 'H'). The battery compartment is located on the rear of the device.

5. Настройка

5.1 Установка аккумулятора

1. Найдите отсек для батареек на задней панели счетчика.
2. Press the release button (if present) and slide open the battery cover.
3. Вставьте две батарейки типа ААА, соблюдая правильную полярность (+ и -).
4. Replace the battery cover and ensure it clicks securely into place.

6. Инструкция по эксплуатации

6.1 Включение/выключение питания

• To power on the meter, press the orange power button.
• To power off the meter, press and hold the orange power button until the display turns off. The meter also features an auto power-off function after a period of inactivity.

6.2 Проведение измерений

1. Включите глюкометр.
2. Point the UV sensor directly towards the UV light source you wish to measure.
3. Read the UV intensity value displayed on the LCD screen.

6.3 Функция нуля

• To ensure accurate readings, especially in low UV environments, use the ZERO function.
• Cover the UV sensor completely to block all light.
• Press the 'ZERO' button. The display should show '0' or a very small value.

6.4 Выбор устройства

• Press the 'UNIT' button to cycle through available measurement units, typically µW/cm² (microwatts per square centimeter) and mW/cm² (milliwatts per square centimeter).

6.5 Удержание данных

• Press the 'HOLD' button (often marked 'H') to freeze the current reading on the display.
• Нажмите кнопку «УДЕРЖАТЬ» еще раз, чтобы сбросить показания и вернуться к измерению в реальном времени.

Функция 6.6 Мин/Макс

• While measuring, press the 'MIN/MAX' button (or similar, depending on model) to display the minimum or maximum UV intensity recorded since the function was activated.
• Cycle through Min, Max, and current readings by pressing the button repeatedly.
• To clear Min/Max memory, typically press and hold the 'MIN/MAX' button, or power cycle the device.

6.7 Подсветка

• Press the backlight button (light bulb icon) to illuminate the LCD display for better visibility in low-light conditions.
• Press it again to turn off the backlight.

7. Техническое обслуживание

7.1 Очистка

• Протрите счетчикasinг с мягким, дamp Ткань. Не используйте абразивные чистящие средства или растворители.
• Keep the UV sensor clean and free from dust or debris to ensure accurate readings. Use a soft brush or compressed air if necessary.

7.2 Хранение

• Если устройство не используется в течение длительного времени, извлеките батареи, чтобы предотвратить утечку.
• Store the meter in its protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

7.3. Замена батареи

• Когда на дисплее появится индикатор низкого заряда батареи, замените батареи, как описано в разделе 5.1.

8. Поиск Неисправностей

• Счетчик не включается: Проверьте установку батареи и убедитесь, что батареи новые.
• Неточные показания: Ensure the sensor is clean and unobstructed. Perform a ZERO calibration. Verify correct unit selection.
• Дисплей тусклый или мерцает: Замените батареи.

9. Технические характеристики

10. Гарантия и поддержка

For warranty information or technical support, please refer to the official Extech webили обратитесь в службу поддержки клиентов. Сохраните чек о покупке в качестве подтверждения покупки на случай предъявления гарантийных претензий.