Продукт болееview
The ANKO 200 Lumen COB Emergency LED Night Light is a versatile, cordless, and portable lighting solution designed for various applications. It features COB (Chip-on-Board) LED technology for bright, efficient illumination and offers multiple mounting options including magnetic attachment and adhesive stickers. This light is ideal for use in wardrobes, camping, kitchens, garages, attics, and for night reading, providing reliable light during power outages or in areas without direct power access.
Основные характеристики
- 200 Lumen COB LED: Provides bright and wide illumination.
- Беспроводной и портативный: Battery-operated for flexible placement and easy transport.
- Несколько вариантов монтажа: Includes strong magnets for metal surfaces and adhesive stickers for other flat surfaces.
- Простая операция переключения: Easy to turn on and off.
- Прочная конструкция: Suitable for various indoor environments.
Информация по безопасности
- Не подвергайте устройство воздействию экстремальных температур или прямых солнечных лучей.
- Не погружайте устройство в воду или другие жидкости.
- Используйте только указанный тип батареи и соблюдайте правильную полярность при установке.
- Хранить в недоступном для детей месте.
- Не пытайтесь разбирать или модифицировать устройство. Это приведет к аннулированию гарантии.
- Если устройство не будет использоваться в течение длительного времени, извлеките из него батарейки, чтобы предотвратить утечку.
Содержимое упаковки
- 1 x ANKO 200 Lumen COB Emergency LED Night Light
- Adhesive Stickers (pre-attached or separate, depending on model variant)
- Руководство пользователя (этот документ)
- Примечание: Батарейки, как правило, не входят в комплект и приобретаются отдельно.
Настраивать
Установка аккумулятора
- Locate the battery compartment cover on the back of the light.
- Чтобы открыть отсек, сдвиньте или отсоедините крышку.
- Insert the required number of AAA batteries (typically 3x AAA, check device markings) according to the polarity indicators (+/-) inside the compartment.
- Плотно закройте крышку батарейного отсека.
Варианты монтажа
The ANKO LED Night Light offers two primary mounting methods:
Магнитный монтаж
- The light has built-in magnets on its back.
- Simply attach the light to any ferrous metal surface, such as a refrigerator, metal cabinet, or tool chest.
- Для оптимального сцепления магнитов убедитесь, что поверхность чистая и сухая.
Adhesive Sticker Mounting
- If using the adhesive stickers, ensure the desired mounting surface is clean, dry, and smooth.
- Peel off the protective backing from the adhesive sticker(s) on the back of the light.
- Press the light firmly onto the chosen surface for at least 30 seconds.
- Allow the adhesive to set for a few hours (e.g., 24 hours) before applying significant pressure or repositioning.
Инструкция по эксплуатации
Включение/выключение
The ANKO LED Night Light is operated by a simple toggle switch, typically located on the side or front of the unit.
- Чтобы включить свет ONСдвиньте переключатель в положение «ВКЛ».
- Чтобы включить свет ВЫКЛЮЧЕННЫЙСдвиньте переключатель в положение "ВЫКЛ".
Сценарии использования
- Wardrobes/Closets: Mount inside for easy visibility of clothes and items.
- Кухонные шкафы: Provide extra light under cabinets or inside pantries.
- Garages/Attics: Illuminate dark corners or work areas where wired lighting is unavailable.
- Camping/Outdoor (sheltered): Use as a portable light source in tents or temporary shelters.
- Аварийное освещение: Keep readily available for power outagес.
- Night Reading: Attach to a headboard or nearby surface for focused light.
Обслуживание
Уборка
- Wipe the exterior of the light with a soft, dry cloth.
- Не используйте абразивные чистящие средства, растворители или агрессивные химикаты, так как они могут повредить поверхность.
- Ensure the light is off and batteries are removed before cleaning.
Замена батареи
When the light dims or stops functioning, it is time to replace the batteries.
- Выключи свет.
- Open the battery compartment as described in the "Battery Installation" section.
- Извлеките старые батареи и утилизируйте их в соответствии с местным законодательством.
- Insert new AAA batteries, ensuring correct polarity.
- Надежно закройте батарейный отсек.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Свет не включается. | Батарейки разряжены или установлены неправильно. | Замените батареи новыми, соблюдая правильную полярность. |
| Свет тусклый. | Батареи разряжены. | Замените батареи. |
| Light falls off mounting surface. | Surface is not clean, smooth, or suitable for adhesive/magnet. | Clean the surface thoroughly. For adhesive, ensure it's smooth and allow setting time. For magnetic, ensure it's a strong ferrous metal. |
| Switch feels loose or unresponsive. | Проблема внутреннего механизма. | Обратитесь в службу поддержки клиентов. Не пытайтесь выполнить ремонт самостоятельно. |
Технические характеристики
| Особенность | Деталь |
|---|---|
| Модель | B079MDCYM7 |
| Источник света | COB-светодиод |
| Выходной световой поток | 200 люмен |
| Источник питания | Battery (e.g., 3x AAA, not included) |
| Варианты монтажа | Magnetic, Adhesive Sticker |
| Размеры | (Конкретные размеры не указаны во входных данных, используется заполнитель) |
| Масса | (Ввод не содержит конкретных данных о весе, используется заполнитель) |
Гарантия и поддержка
ANKO products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ANKO webСохраните чек в качестве подтверждения покупки.
If you encounter any issues or have questions regarding your ANKO LED Night Light, please contact our customer support team:
- Электронная почта: support@anko.com (Бывшийamp(Электронная почта, фактические контактные данные могут отличаться)
- Телефон: 1-800-XXX-XXXX (Бывшийample phone, actual contact info may vary)
- Webсайт: www.anko.com (Бывшийample web(Информация на сайте может отличаться)
Please have your model number (B079MDCYM7) and purchase date ready when contacting support.
Важные замечания о СМИ
Изображения продукта: No useful product images were provided in the source data. The image link provided was a "No image available" placeholder. Therefore, no product images could be embedded in this manual.
Видеоролики о продуктах: No official product videos from the seller were found in the provided data. Therefore, no videos could be embedded in this manual.