Steinbach Active Balls+ Filter System Instruction Manual

Введение

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Steinbach Active Balls+ Filter System, model 040386. This non-self-priming pump is designed to maintain crystal-clear water in pools up to approximately 19,000 liters. Please read this manual thoroughly before initial use to ensure proper function and longevity of your filter system.

Инструкции по технике безопасности

Во избежание травм и повреждений всегда соблюдайте следующие меры предосторожности:

• Убедитесь, что блок питания соответствует техническим характеристикам, указанным на этикетке изделия.
• Отключите электропитание перед выполнением любого обслуживания или чистки.
• Не эксплуатируйте насос, если шнур питания или вилка повреждены.
• Во время работы системы фильтрации следует держать детей и посторонних лиц подальше от нее.
• Install the filter system on a stable, level surface, protected from direct sunlight and rain.
• Do not run the pump dry. Ensure it is always filled with water during operation.
• Maximum water temperature for operation is 35°C (95°F).
• Suitable for saltwater up to a salt content of 5 g/l.

Продукт болееview и компоненты

The Steinbach Active Balls+ Filter System consists of several key components designed for optimal pool water filtration.

Рисунок 1: Болееview of the Steinbach Active Balls+ Filter System components, showing the filter tank, pump unit, and various connection parts.

Рисунок 2: Подробная информация view of the 7-way valve, indicating various operational modes such as Filter, Rinse, Waste, Recirculate, Closed, and Backwash.

Figure 3: Product label displaying technical specifications of the pump, including model number, power, voltage, and maximum temperature.

Figure 4: The filter system alongside a visual representation of the filter balls, which are the primary filtration medium.

Figure 5: Dimensional diagram illustrating the approximate height of the filter tank, which is 55 cm (22 inches).

Настраивать

Follow these steps for initial setup of your filter system:

1. Распаковываем компоненты: Аккуратно извлеките все детали из упаковки. Убедитесь, что все компоненты присутствуют в соответствии с упаковочным листом.
2. Расположите систему: Place the filter system on a firm, level surface near your pool, ensuring it is protected from direct weather exposure.
3. Install Filter Balls: Open the filter tank and carefully pour the approximately 300g of filter balls into the tank. Ensure the central pipe is correctly positioned before closing the tank.
4. Connect Pump to Filter Tank: Attach the pump unit to the filter tank using the provided connections. Ensure all seals are properly seated and connections are tightened to prevent leaks. It is recommended to use PTFE tape on threaded connections for a secure seal.
5. Подключиться к бассейну: Connect the pool hoses to the filter system's inlet and outlet ports. The inlet hose typically connects from the pool skimmer/main drain to the pump's suction side, and the outlet hose connects from the filter's return side back to the pool.
6. Залейте водой: Before starting the pump, ensure the pool is filled with water and the filter system is primed by allowing water to flow into the pump and filter tank.
7. Электрическое подключение: Connect the power plug to a grounded electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD) for safety.

Operating the 7-Way Valve

The 7-way valve controls the flow of water through the filter system. Always turn off the pump before changing the valve position.

• ФИЛЬТР: This is the standard operating position for daily filtration. Water flows from the pool, through the filter balls, and back to the pool.
• ОБРАТНАЯ ПРОМЫВКА: Used for cleaning the filter balls. Water flows in reverse through the filter, dislodging trapped debris, and is then directed to waste. Perform backwash when the pressure gauge indicates higher than normal pressure or when water flow decreases.
• СМЫВАТЬ: Used after backwashing to flush out any remaining debris from the filter and settle the filter balls. Water flows through the filter and is directed to waste.
• НАПРАСНО ТРАТИТЬ: Bypasses the filter and sends water directly from the pool to waste. Useful for vacuuming heavy debris directly to waste or lowering the pool water level.
• РЕЦИРКУЛЯЦИЯ: Circulates water through the pump and back to the pool without passing through the filter. Useful for distributing chemicals quickly.
• ЗАКРЫТО: Shuts off all flow to the filter and pump. Use this position only when the pump is off and for maintenance or when the pool is not in use.
• ПОДГОТОВКА К ЗИМЕ: (If applicable) Position for draining the system for winter storage. Consult specific winterization instructions.

Обслуживание

Regular maintenance ensures optimal performance and extends the life of your filter system.

• Обратная промывка: Perform backwashing regularly, typically once a week or when the pressure gauge reading increases by 0.2-0.3 bar (3-5 psi) above its clean operating pressure.
  1. Выключите насос.
  2. Установите шестиходовой клапан в положение «Обратная промывка».
  3. Turn on the pump and run until the water in the sight glass (if present) runs clear (approx. 2-3 minutes).
  4. Выключите насос.
  5. Установите шестиходовой клапан в положение «ПРОМЫВКА».
  6. Включите насос и дайте ему поработать 30-60 секунд.
  7. Выключите насос.
  8. Установите шестиходовой клапан обратно в положение "ФИЛЬТР".
  9. Включите насос, чтобы возобновить обычную фильтрацию.
• Cleaning Filter Balls: The filter balls can be cleaned manually or in a washing machine (in a laundry bag) at 30°C (86°F) without fabric softener. Replace filter balls when they show signs of significant wear or reduced filtration efficiency.
• Очистка корзины насоса: Periodically check and clean the pump's pre-filter basket (if applicable) to remove large debris that could obstruct flow.
• Подготовка к зиме: Before freezing temperatures, drain all water from the pump, filter tank, and hoses. Store the pump and valve in a dry, frost-free location.

Поиск неисправностей

В этом разделе вы найдете информацию о распространенных проблемах и способах их решения.

Технические характеристики

Гарантия и поддержка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Steinbach customer service. Keep your proof of purchase for warranty claims.