SkyTech 9800337

Руководство пользователя пульта дистанционного управления для камина SkyTech 9800337 Smart Batt II/III

Модель: 9800337

For Heat-N-Glo Battery Receive Fireplace Systems

Введение

This manual provides detailed instructions for the installation, operation, and maintenance of the SkyTech 9800337 Smart Batt II/III Fireplace Remote Control System. This system is designed to offer safe, reliable, and user-friendly control for gas heating appliances.

The system operates using radio frequencies (RF) within a 20-foot range, utilizing non-directional signals. Each system is pre-programmed at the factory with one of 1,048,567 unique security codes. It is essential to match the remote receiver's code to that of the transmitter before initial use.

Продукт болееview

SkyTech 9800337 Smart Batt II/III Fireplace Remote with open battery cover

Image: The SkyTech 9800337 Smart Batt II/III Fireplace Remote. The remote is black with an LCD display at the top and control buttons below. A small flip cover on the lower left side is open, revealing text instructions for manual and thermostatic operation.

The SkyTech 9800337 system includes both a battery-operated transmitter (remote) and a receiver. Key features include:

  • All battery-operated receiver and transmitter for flexible placement.
  • A protective flip cover for the 4-button controls, preventing accidental presses.
  • LCD display showing room temperature in either Fahrenheit (°F) or Celsius (°C).
  • Equipped with 1,048,576 security codes to prevent interference.
  • Programmable thermostat setting for automated temperature control.
  • Includes all necessary Skytech batteries and a wall holder for convenient storage.
  • Features a 9-hour countdown timer and a 24-hour clock.
  • Flame icon and low battery indicator on the LCD for easy monitoring.

Настраивать

1. Установка аккумулятора

The system requires 6 AA batteries, which are included. Install batteries into both the transmitter and the receiver according to the polarity markings. Ensure the battery compartment covers are securely closed.

2. Размещение приемника

Place the receiver near your gas heating appliance, ensuring it is within the 20-foot operating range of the transmitter. Avoid placing the receiver in direct contact with hot surfaces or in areas with excessive moisture.

3. Code Matching (Pairing)

Before first use, the remote receiver's code must be matched to the transmitter. Refer to the specific instructions provided with your product for the exact pairing procedure, which typically involves pressing a learn button on the receiver and then a button on the transmitter within a short timeframe.

Инструкция по эксплуатации

The SkyTech 9800337 remote offers both manual and thermostatic operation modes.

Ручное управление

To operate the fireplace manually:

  1. Нажмите РЕЖИМ button on the transmitter until "ON" or "OFF" is displayed for manual control.
  2. Use the appropriate buttons (e.g., ON/OFF, UP/DOWN) to turn the fireplace on or off.

Thermostatic Operation

To use the programmable thermostat feature:

  1. Нажмите РЕЖИМ button until "THERMO" is displayed on the LCD.
  2. Adjust the desired SET temperature using the UP or DOWN buttons.
  3. The system will automatically turn the fireplace on or off to maintain the set temperature.

Timer and Clock Functions

The remote features a 9-hour countdown timer and a 24-hour clock. Consult the detailed instructions provided with your product for setting these functions.

Обслуживание

Замена батареи

When the low battery indicator appears on the LCD, replace all batteries in both the transmitter and receiver promptly. Use only fresh AA alkaline batteries. Dispose of old batteries responsibly.

Уборка

Clean the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.

Хранилище

If the system will not be used for an extended period, remove the batteries from both the transmitter and receiver to prevent leakage and damage.

Поиск неисправностей

Проблема Возможная причина Решение
Удаленный не отвечает Low batteries; Receiver out of range; Unmatched security codes. Replace batteries; Move closer to receiver; Re-match security codes.
Непоследовательная работа Interference from other RF devices; Weak signal. Ensure no strong RF sources nearby; Check battery strength.
ЖК-дисплей неактивен или тусклый. Разряженные или разряженные батареи. Замените батареи.

If troubleshooting steps do not resolve the issue, please contact SkyTech customer support.

Технические характеристики

  • Номер модели: 9800337
  • Размеры продукта: 7 x 4 x 4 дюйма
  • Масса: Примерно 0.01 унции (без учета упаковки)
  • Источник питания: 6 батарейки типа АА (в комплекте)
  • Цвет: Черный
  • Особая особенность: Программируемый термостат
  • Максимальное количество поддерживаемых устройств: 1
  • Совместимые устройства: Fire Pit, Fireplace (specifically Heat-N-Glo Battery Receive systems)
  • Диапазон радиочастот: Up to 20 feet (non-directional)
  • Коды безопасности: 1,048,567 unique codes

Гарантия и поддержка

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official SkyTech webСохраните чек о покупке для предъявления гарантийных претензий.

Производитель: Скайтек

Связанные документы - 9800337

Предварительноview Система дистанционного управления камином Skytech 5301P: руководство по установке и эксплуатации
Это руководство содержит подробные инструкции по установке, эксплуатации и устранению неисправностей системы дистанционного управления Skytech 5301P для газовых каминов. Узнайте о функциях передатчика, настройке приёмника, подключении, режимах термостата и программирования, функциях безопасности и гарантии.
Предварительноview Система дистанционного управления газовым камином Skytech 5310: Инструкция по установке и эксплуатации
Подробное руководство по установке и эксплуатации системы дистанционного управления Skytech 5310 для газовых отопительных приборов, охватывающее настройку, функции, меры безопасности, устранение неисправностей и гарантию.
Предварительноview Программируемая система дистанционного управления Skytech 3301P: Инструкция по установке и эксплуатации
Подробное руководство по установке, эксплуатации и программированию системы дистанционного управления Skytech 3301P для газовых каминов, охватывающее настройку, режимы, функции безопасности, проводку и гарантийную информацию.
Предварительноview Пульт дистанционного управления камином Skytech 3301: инструкция по установке и эксплуатации
Подробное руководство по установке и эксплуатации системы дистанционного управления Skytech 3301 для газовых каминов, охватывающее настройку, функции, меры безопасности и устранение неисправностей.
Предварительноview Инструкция по установке и эксплуатации Skytech 3002
В настоящем документе приведены подробные инструкции по установке и эксплуатации системы дистанционного управления Skytech 3002, предназначенной для безопасной и удобной эксплуатации газовых отопительных приборов.
Предварительноview Инструкция по установке и эксплуатации Skytech RCT-MLT IV
Comprehensive guide detailing the installation and operation of the Skytech RCT-MLT IV remote control system for gas appliances. Covers setup, transmitter/receiver functions, thermostat, flame height, fan control, timer, safety warnings, troubleshooting, FCC compliance, and warranty information.