DS18 PRO-GM6 Loudspeaker Instruction Manual

1. Введение

Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Информация по технике безопасности

Always observe the following safety precautions when installing and operating your loudspeaker:

• Перед началом любых электромонтажных работ отсоедините отрицательную клемму аккумуляторной батареи автомобиля, чтобы предотвратить короткое замыкание.
• Ensure proper wiring and connections. Incorrect wiring can damage the speaker, ampлитий-ионная батарея, или электрическая система транспортного средства.
• Для подключения питания и динамиков используйте провода соответствующего сечения.
• Mount the speaker securely to prevent movement during vehicle operation.
• Avoid installing speakers in locations that obstruct vehicle safety features (e.g., airbags).
• Не используйте аудиосистему на чрезмерно высокой громкости в течение длительного времени, так как это может привести к повреждению слуха.
• Если вы не уверены в каком-либо этапе процесса установки, проконсультируйтесь с профессиональным установщиком.

3. Что в коробке

• DS18 PRO-GM6 Loudspeaker (1 unit)
• Руководство по эксплуатации

Note: Additional mounting hardware or speaker wire may be required and is not included.

4. Технические характеристики

Изображение: Спереди view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.

5. Настройка и установка

Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.

5.1 Планирование установки

• Расположение: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
• Проводка: Plan the routing of speaker wires from your amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
• AmpСопоставление усилителей: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.

5.2 Установка динамика

Изображение: вид сбокуfile of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.

1. Подготовьте монтажную поверхность: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
2. Позиция докладчика: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
3. Безопасный динамик: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.

5.3 Подключение проводки

Изображение: сзади view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.

1. Определить терминалы: The speaker has clearly marked positive (+) and negative (-) terminals.
2. Подключите провода: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
3. Безопасные соединения: Убедитесь, что все соединения надежно закреплены и не подвержены коротким замыканиям.

6. Инструкция по эксплуатации

The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.

• Системная интеграция: Connect the PRO-GM6 to an appropriate ampканал лифер.
• Настройки кроссовера: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
• Регулировка усиления: Установите ampПравильно согласовать усиление усилителя с выходной громкостью.tage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
• Период обкатки: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

7. Техническое обслуживание

The DS18 PRO-GM6 loudspeaker requires minimal maintenance:

• Уборка: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
• Инспекция: Периодически проверяйте надежность крепления проводов динамиков и убедитесь, что они не перетерты и не оголены.
• Охрана окружающей среды: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.

8. Поиск Неисправностей

9. Гарантия и поддержка

DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.

Более подробную информацию и контактные данные вы можете найти на DS18 Official Store on Amazon.