1. Введение
This document provides detailed instructions for the Waveshare 4.2inch E-Ink Display Module. This module features a 400x300 resolution and communicates via an SPI interface. Its design offers ultra-low power consumption, a wide viewing angle, and maintains a clear display without continuous power, making it suitable for applications such as electronic shelf labels and industrial instrumentation.
Рисунок 1: Передняя часть view of the 4.2inch E-Ink Display Module.
2. Особенности
- No Backlight Required: The display retains its content indefinitely even when power is removed.
- Сверхнизкое энергопотребление: Power is primarily consumed only during display refreshes.
- Интерфейс SPI: Facilitates connection with various controller boards, including Raspberry Pi, Arduino, and Nucleo.
- Бортовой объемtage-переводчик: Ensures compatibility with both 3.3V and 5V microcontrollers (MCUs).
- Ресурсы для разработки: Онлайн-руководства пользователя и примерыample code are provided for Raspberry Pi, Jetson Nano, Arduino, and STM32 platforms.
3. Что в коробке
В комплект входят следующие компоненты:
- 1x Waveshare 4.2inch e-Paper Module
- 1x кабель PH2.0 20 см, 8 контактов
Figure 2: Contents of the package, including the display module and connecting cable.
4. Технические характеристики
| Параметр | Ценить |
|---|---|
| Размер дисплея | 4.2 дюймов |
| Разрешение | 400 x 300 пикселей |
| Цвет дисплея | Черный/Белый |
| Серая шкала | 4 |
| Рабочий объемtage | 3.3В / 5В |
| Интерфейс | 3-проводной SPI, 4-проводной SPI |
| Габаритные размеры | 103.0мм х 78.5мм |
| Область отображения | 84.8мм х 63.6мм |
| Зернистость | 0.212 х 0.212 мм |
| Полное время обновления | Примерно 4 секунды |
| Частичное время обновления | Примерно 0.4 секунды |
| Refresh Power Consumption | 26.4 мВт (типичное значение) |
| Потребляемая мощность в режиме ожидания | <0.017 мВт |
| Viewугол наклона | >170° |
Рисунок 3: Модуль сверхуview, interface details, and dimensions.
5. Настройка и подключение
The 4.2inch E-Ink Display Module connects to a host microcontroller via a Serial Peripheral Interface (SPI). Ensure correct pin connections to prevent damage to the module or host device.
5.1. Определения выводов
Refer to the following table and diagram for the pin assignments:
| Приколоть | Описание |
|---|---|
| ВКЦ | Power supply (3.3V-5V) |
| Земля | Земля |
| ДИН | SPI MOSI (Master Out Slave In) pin |
| КЛК | Вывод SPI SCK (последовательные часы) |
| CS | SPI Chip Select, активный низкий уровень |
| DC | Выбор данных/команды (высокий уровень для данных, низкий для команд) |
| РСТ | Внешний сброс, активный низкий уровень |
| BUSY | Busy status output, active high when busy |
Figure 4: Back of the module with pinout labels (Revision 2.1 shown).
5.2. Процедура подключения
- Identify the corresponding SPI pins (VCC, GND, DIN, CLK, CS, DC, RST, BUSY) on your host microcontroller (e.g., Raspberry Pi, Arduino).
- Connect the included 8-pin cable to the module's connector.
- Carefully connect each wire from the cable to the correct pin on your microcontroller. Double-check all connections before applying power.
- Ensure your microcontroller's logic level is compatible with the module's operating voltage (3.3V or 5V). The onboard voltage translator handles this automatically.
6. Операция
The Waveshare 4.2inch E-Ink Display Module operates on the principle of electrophoretic display technology. This means it does not require a backlight and can hold an image indefinitely without power. Content updates require a refresh cycle, during which power is consumed.
6.1. Display Refresh
- Полное обновление: A complete screen update typically takes around 4 seconds. This clears the entire display and redraws new content.
- Частичное обновление: For minor updates to specific areas of the screen, a partial refresh can be used, which is significantly faster, approximately 0.4 seconds. This mode is useful for dynamic content that changes frequently without needing a full screen clear.
Рисунок 5: Example image displayed on the E-Ink module.
Figure 6: The E-Ink display module in a blank state.
7. Техническое обслуживание
E-Ink displays are generally low-maintenance. To ensure longevity and optimal performance:
- Не подвергайте дисплей длительному воздействию экстремальных температур или прямых солнечных лучей.
- Do not apply excessive pressure to the display surface.
- Clean the display surface gently with a soft, dry, lint-free cloth. Avoid using liquid cleaners or abrasive materials.
- Когда модуль не используется, храните его в сухом, защищенном от пыли месте.
8. Поиск Неисправностей
If you encounter issues with your E-Ink display module, consider the following common troubleshooting steps:
- No Display/Garbled Output:
- Verify all SPI connections (VCC, GND, DIN, CLK, CS, DC, RST, BUSY) are correct and secure. Incorrect wiring is a common cause of display issues.
- Ensure the power supply to the module is within the specified 3.3V-5V range.
- Check that the correct software library and driver are being used for the 4.2inch 400x300 E-Ink display. Refer to Waveshare's online resources for specific exampлес.
- Confirm that the reset (RST) and busy (BUSY) pins are correctly handled in your code.
- Низкая частота обновления:
- Full refreshes are inherently slower than partial refreshes. If you are performing frequent updates, consider implementing partial refresh functionality in your code.
- Ensure your SPI clock speed is configured correctly and is not excessively slow.
- Display Not Clearing Completely:
- Sometimes, residual ghosting can occur. Performing a full refresh cycle multiple times may help clear the display.
- Ensure your software is sending the correct commands for a full clear before drawing new content.
9 Поддержка и ресурсы
For further assistance, detailed documentation, and development examples, please refer to the official Waveshare online resources. These resources typically include comprehensive user manuals, schematics, and code examples for various platforms like Raspberry Pi, Jetson Nano, Arduino, and STM32.
Visit the Waveshare official website or product page for the latest support information and downloads.
