1. Введение
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Kaysun Aquatix 8 kW Pool Heat Pump, model KSWP-80 Hn. Please read this manual thoroughly before installation or use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. Информация по технике безопасности
Важные инструкции по технике безопасности:
- Installation and electrical connections must be performed by a qualified professional in accordance with all local and national codes.
- Убедитесь, что блок питания соответствует техническим характеристикам теплового насоса.
- Не используйте устройство, если какая-либо его часть повреждена или если шнур питания изношен.
- Не допускайте детей и домашних животных к устройству во время его работы.
- Do not insert objects into the fan grille or any openings.
- Обеспечьте надлежащую вентиляцию вокруг устройства.
- Отключите питание перед выполнением любого обслуживания или ремонта.
- Данный прибор не предназначен для использования лицами (включая детей) с ограниченными физическими, сенсорными или умственными способностями или с недостатком опыта и знаний, если они не находятся под присмотром или не получили инструкции по использованию прибора от лица, ответственного за их безопасность.
3. Продукт закончилсяview
The Kaysun Aquatix 8 kW Pool Heat Pump is designed to efficiently heat swimming pool water, extending your swimming season. It utilizes ambient air to transfer heat to your pool, offering an energy-efficient heating solution.
Figure 1: Kaysun Aquatix 8 kW Pool Heat Pump KSWP-80 Hn. This image shows the compact, rectangular outdoor unit of the heat pump, typically white or light grey, with a fan grille on one side and a control panel on the front. Water inlet/outlet connections are usually located on the side or back.
Ключевые компоненты:
- Испаритель: Absorbs heat from the ambient air.
- Компрессор: Increases the temperature and pressure of the refrigerant.
- Конденсатор: Transfers heat from the refrigerant to the pool water.
- Expansion Valve: Reduces the pressure and temperature of the refrigerant.
- Панель управления: For setting temperature, operating modes, and displaying status.
4. Настройка и установка
Professional installation by a certified technician is highly recommended to ensure safety and optimal performance.
- Расположение: Choose a well-ventilated outdoor location, away from direct sunlight, with sufficient clearance around the unit for airflow (typically 50cm on all sides and 100cm above). Avoid enclosed spaces or areas where exhaust air can be recirculated.
- Монтаж: Place the unit on a solid, level base that can support its weight and minimize vibration.
- Сантехнические соединения: Connect the heat pump to your pool's filtration system after the filter and before any chemical feeders. Ensure proper water flow direction. Use appropriate PVC fittings and sealants.
- Электрические соединения: Connect the unit to a dedicated electrical circuit with appropriate overcurrent protection (circuit breaker) as specified in the technical specifications. All wiring must comply with local electrical codes.
- Первоначальный запуск: After all connections are secure and checked, ensure the pool pump is running and water is flowing through the heat pump before turning on the electrical supply to the unit.
5. Инструкция по эксплуатации
Ensure your pool pump is running before operating the heat pump.
- Включение/выключение питания: Use the main power switch on the unit or the control panel to turn the heat pump on or off.
- Настройка температуры: Use the UP/DOWN arrows or temperature setting buttons on the control panel to adjust your desired pool water temperature. The display will show the current and set temperatures.
- Режимы работы: Your heat pump may have different operating modes (e.g., Heating, Cooling, Auto). Refer to the control panel interface for specific mode selection.
- Начальный нагрев: It may take 24-72 hours to reach the desired temperature, depending on pool size, ambient temperature, and initial water temperature. Keep the pool covered when not in use to minimize heat loss.
6. Техническое обслуживание
Регулярное техническое обслуживание обеспечивает оптимальную производительность и продлевает срок службы вашего теплового насоса.
- Чистые катушки: Periodically inspect and clean the evaporator coils to remove leaves, dirt, and debris. A soft brush or garden hose can be used. Ensure power is off before cleaning.
- Чистый поток воздуха: Keep the area around the heat pump clear of obstructions to ensure proper airflow.
- Химия воды: Maintain proper pool water chemistry (pH, chlorine levels) to prevent corrosion and scale buildup in the heat exchanger.
- Подготовка к зиме: Before freezing temperatures, drain all water from the heat pump and plumbing lines to prevent freeze damage. Consult a professional for proper winterization procedures.
- Профессиональный осмотр: It is recommended to have a qualified technician inspect the unit annually.
7. Поиск Неисправностей
Прежде чем обращаться в службу поддержки клиентов,view Эти распространенные проблемы и решения:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Heat pump not turning on | No power; tripped circuit breaker; unit switch off. | Check power supply, reset breaker, ensure unit switch is on. |
| Pool not heating sufficiently | Low ambient temperature; dirty coils; insufficient run time; low water flow. | Ensure coils are clean, allow more time, check pool pump and filter, verify water flow. |
| Отображается код ошибки | Конкретная внутренняя неисправность. | Note the error code and consult the full technical manual or contact a qualified technician. |
| Необычный шум | Debris in fan; loose components; compressor issue. | Turn off power, inspect for debris, tighten loose parts. If noise persists, contact service. |
For issues not listed here or if solutions do not resolve the problem, please contact a qualified service technician.
8. Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | КАЙСУН |
| Модель | KSWP-80 Hn |
| ASIN | B071YNJDKK |
| Производитель | КАЙСУН |
| Теплопроизводительность | 8 кВт |
| Рекомендуемый объем бассейна | 40 - 60 m³ |
| Первая доступная дата | 21 февраля 2020 г. |
9. Гарантия и поддержка
For warranty information, please refer to the warranty card included with your product or contact your authorized Kaysun dealer or the point of purchase. Keep your proof of purchase for warranty claims.
For technical support or service inquiries, please contact Kaysun customer service or your local distributor. Contact details can typically be found on the manufacturer's official webсайте или в документации о покупке.
