Hunter PHC-1200

Hunter PRO-HC PHC-1200 Wi-Fi Irrigation Controller

Model: PHC-1200 | Brand: Hunter

Продукт болееview

The Hunter PRO-HC PHC-1200 is a professional-grade, outdoor Wi-Fi irrigation controller designed for residential use. It integrates with Hydrawise web-based software, allowing for smart water management, remote control, and weather-based scheduling. This 12-station controller helps optimize water usage and maintain a healthy landscape.

Настройка и установка

Proper installation is crucial for the optimal performance of your PRO-HC controller. Ensure all power is disconnected before beginning any wiring.

1. Монтаж контроллера

Select a suitable outdoor location that is protected from direct sunlight and extreme weather conditions. Use appropriate mounting hardware to secure the controller firmly to a wall or sturdy surface. Ensure the controller is mounted vertically with the wiring compartment facing downwards for proper drainage.

Hunter PRO-HC PHC-1200 controller mounted with door open, showing screen and key.

Figure 1: Hunter PRO-HC PHC-1200 controller with its protective door open, displaying the Hydrawise screen and an attached key for security. This image shows the overall design and the user interface.

2. Проводные соединения

The PRO-HC controller requires connection to AC power, zone valves, and a common wire. Optional sensor connections are also available.

  • Питание переменного тока: Connect the 120V AC power supply wires to the terminals labeled АС-1 и АС-2. Ensure the power is off before making this connection.
  • Общий провод: Connect the common wire from your irrigation valves to the terminal labeled КОМ. All valves share this common connection.
  • Провода зоны: Connect each individual zone valve wire to its corresponding numbered terminal (1, 2, 3, ... 12).
  • Sensor Wires (Optional): If using a rain or flow sensor, connect its wires to the SEN-1 и SEN-2 terminals. Refer to your sensor's manual for specific wiring instructions.
Close-up of Hunter PRO-HC wiring terminals showing zone and common wire connections.

Рисунок 2: Подробная информация view of the wiring compartment, showing the connection points for individual zone wires (numbered terminals) and the common wire (COM). The AC power input is also visible at the top left.

Close-up of Hunter PRO-HC AC and sensor wiring terminals.

Figure 3: A closer look at the AC power input terminals (AC-1, AC-2) and the sensor input terminals (SEN-1, SEN-2) within the Hunter PRO-HC controller's wiring compartment.

3. Wi-Fi and Hydrawise App Setup

Once wired, power on the controller. Follow the on-screen prompts to connect the controller to your local Wi-Fi network. Download the Hydrawise app from your device's app store (iOS or Android) or access the web интерфейс на Hydrawise.com. Create an account and add your controller by following the in-app instructions. This will enable remote control and smart watering features.

Управление контроллером

The Hydrawise software provides comprehensive control over your irrigation system.

Ручной полив

To manually run a zone or all zones, use the "Quick Run" feature in the Hydrawise app or directly on the controller's touchscreen. Select the desired zones and set the run time.

Creating and Managing Programs

Programs define when and how long your zones will water. You can create multiple programs with different start times, run durations, and watering days. Hydrawise offers flexible scheduling options, including daily, weekly, or cyclic schedules.

Predictive Watering™

Leverage the Predictive Watering feature by linking your controller to a local weather station. This allows the system to automatically adjust watering schedules based on real-time and forecasted weather conditions, such as temperature, rainfall, humidity, and wind speed. This feature helps conserve water and ensures optimal plant health.

Обслуживание

Regular maintenance ensures the longevity and efficiency of your PRO-HC controller.

  • Уборка: Периодически протирайте внешнюю поверхность контроллера мягкой тряпкой.amp ткань. Избегайте использования агрессивных химикатов.
  • Обновления программного обеспечения: Ensure your Hydrawise app and controller firmware are up-to-date. Updates are typically managed automatically through the Hydrawise platform when connected to Wi-Fi.
  • Подготовка к зиме: In regions with freezing temperatures, it is recommended to winterize your irrigation system, including the controller. Disconnect power and drain any water from the system to prevent freeze damage.

Поиск неисправностей

If you encounter issues with your PRO-HC controller, refer to the following common troubleshooting steps:

ПроблемаВозможная причинаРешение
Контроллер не имеет питания.No AC power, tripped breaker, faulty transformer.Check power outlet, reset circuit breaker, verify transformer output.
Zone not watering.Faulty valve, broken wire, incorrect programming, master valve issue.Check valve solenoid, inspect wiring, verify program settings, check master valve operation.
Проблемы с подключением к Wi-Fi.Weak signal, incorrect password, router issues.Move controller closer to router, re-enter Wi-Fi password, restart router, check network settings.
"No Flow" or "Flow Error" message.Flow sensor issue, low water pressure, closed main valve.Check flow sensor connection, verify water supply, ensure main shut-off valve is open.

For more detailed troubleshooting, consult the Hydrawise online support resources or contact Hunter customer service.

Технические характеристики

МодельПХК-1200
БрендОхотник
Количество станций12
Размеры продукта10 дюймов (Д) x 4 дюймов (Ш) x 9 дюймов (В) (25.4 см x 10.16 см x 22.86 см)
Вес товара5.44 фунта (2.47 кг)
Томtage120 В переменного тока
ЦветБелый
Тип дисплеяЖК-дисплей или светодиод

Гарантия и поддержка

Hunter Industries provides a limited warranty for the PRO-HC controller. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Hunter Industries webсайт.

For technical support, product inquiries, or warranty claims, please contact Hunter Industries customer service or visit their support portal:

Always provide your product model number (PHC-1200) and serial number when contacting support for faster assistance.

Связанные документы - ПХК-1200

Предварительноview Руководство по установке контроллеров Hydrawise Ready
Это руководство по установке содержит инструкции по установке контроллеров Hunter HC, HPC и Pro-HC с подключением Hydrawise. Оно охватывает монтаж, подключение питания, навигацию по главному экрану и использование мастера подключения.
Предварительноview Краткое руководство пользователя контроллера полива Hunter Pro-HC
Краткое руководство по установке и настройке контроллера полива Hunter Pro-HC, включая подключение по Wi-Fi и настройку приложения.
Предварительноview Краткое руководство пользователя контроллеров Hunter HC Hydrawise-Ready
В этом кратком руководстве пользователя содержится основная информация по установке систем управления поливом Hunter HC, Pro-C Hydrawise и Pro-HC Wi-Fi, разработанных для эффективного управления водными ресурсами.
Предварительноview Hunter HC Irrigation Controller Quick Start Guide | Hydrawise Ready
Learn how to install, connect, and configure your Hunter HC Irrigation Controller with Hydrawise connectivity. This quick start guide covers Wi-Fi setup, wiring, and app configuration.
Предварительноview Руководство пользователя программного обеспечения/приложения Hunter Hydrawise для контроллеров полива
This manual provides instructions for the Hunter Hydrawise Software/App, designed for Hydrawise-Ready Irrigation Controllers like the PRO-HC. It covers installation and basic operation for efficient lawn and garden watering.
Предварительноview Hunter Hydrawise Irrigation Controller Installation Guide
Comprehensive installation and setup guide for Hunter Hydrawise irrigation controllers, including PRO-HC, HPC, and HC models. Learn how to connect, configure, and manage your smart irrigation system.