Руководство по эксплуатации унитаза Cersanit Mito Compact 349 mi010 3/6L

1. Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your Cersanit Mito Compact 349 mi010 3/6L toilet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

2. Информация по технике безопасности

Важные инструкции по технике безопасности:

• Always turn off the water supply before beginning any installation or maintenance.
• При выполнении монтажных работ необходимо использовать соответствующие средства индивидуальной защиты (СИЗ), такие как перчатки и защитные очки.
• Убедитесь, что все соединения надежно закреплены и водонепроницаемы, чтобы предотвратить протечки.
• Do not use abrasive cleaners or tools that could damage the ceramic surface or plastic components.
• Если вы не уверены в какой-либо части установки, проконсультируйтесь с квалифицированным сантехником.

3. Содержимое упаковки

Перед началом установки убедитесь, что все компоненты присутствуют и не повреждены.

• Cersanit Mito Compact 349 mi010 Toilet Bowl
• Cersanit Mito Compact 349 mi010 Cistern (3/6L dual flush mechanism pre-installed)
• Toilet Seat (Planche PP TK001-009)
• Cistern-to-bowl fixing bolts and seals
• Floor fixing kit (screws, caps)
• Инструкция по установке (данное руководство)

4. Настройка и установка

This section outlines the steps for installing your Cersanit Mito Compact toilet. Ensure you have all necessary tools and materials before proceeding.

4.1 Необходимые инструменты

• Разводной ключ
• Screwdriver (Phillips/Flathead)
• Drill with appropriate masonry bit (if fixing to floor)
• Уровень спиртовой
• Измерительная лента
• Пистолет для герметика и силиконовый герметик

4.2 Этапы установки

1. Подготовьте территорию: Turn off the main water supply. Remove any existing toilet and clean the area thoroughly. Ensure the waste pipe connection is clear and accessible.
2. Position the Toilet Bowl: Carefully place the toilet bowl in its desired position, aligning it with the waste pipe. Mark the drilling points for the floor fixings.
3. Drill and Secure: Remove the toilet bowl. Drill holes at the marked points. Insert wall plugs (if required) and then reposition the toilet bowl. Secure it to the floor using the provided fixing kit. Do not overtighten.
4. Install the Cistern: Place the rubber seal onto the flush valve outlet at the bottom of the cistern. Carefully lower the cistern onto the toilet bowl, aligning the flush valve with the inlet hole on the bowl. Secure the cistern to the bowl using the provided bolts and washers. Tighten evenly to ensure a watertight seal.
5. Подключение водоснабжения: Connect the water supply hose to the cistern's inlet valve. Ensure a washer is in place and tighten securely with an adjustable wrench. Do not overtighten.
6. Установите сиденье для унитаза: Attach the toilet seat (Planche PP TK001-009) according to its specific instructions. Typically, this involves inserting the hinges into the designated holes on the toilet bowl and securing them from underneath.
7. Тест на герметичность: Turn on the main water supply slowly. Allow the cistern to fill. Flush the toilet several times and carefully inspect all connections (water supply, cistern-to-bowl, and waste pipe) for any leaks.
8. Нанесите герметик: Once satisfied there are no leaks, apply a bead of silicone sealant around the base of the toilet where it meets the floor. This provides a neat finish and prevents water from collecting underneath.

Figure 1: Fully assembled Cersanit Mito Compact 349 mi010 3/6L toilet. This image shows the complete toilet unit with the cistern and bowl, ready for use.

5. Инструкция по эксплуатации

The Cersanit Mito Compact 349 mi010 features a dual-flush mechanism for water conservation.

• Full Flush (6L): Press the larger button on the top of the cistern lid for a full flush, suitable for solid waste.
• Half Flush (3L): Press the smaller button on the top of the cistern lid for a half flush, suitable for liquid waste, saving water.

6. Техническое обслуживание

Regular cleaning and maintenance will ensure the hygiene and longevity of your toilet.

6.1 Чистка туалета

• Use mild, non-abrasive bathroom cleaners and a soft cloth or sponge.
• Avoid harsh chemicals, abrasive pads, or wire brushes, as these can scratch the ceramic surface or damage the toilet seat.
• Clean the toilet bowl, exterior, and seat regularly. For the toilet seat, use only mild soap and water.

6.2 Cistern Maintenance

• Periodically check the cistern for any sediment buildup. If necessary, turn off the water supply, flush the toilet to empty the cistern, and clean the interior with a soft brush and mild cleaner.
• Inspect the flush mechanism and fill valve for proper operation. If issues arise, refer to the troubleshooting section or consult a professional.

7. Поиск Неисправностей

В этом разделе рассматриваются распространенные проблемы, с которыми вы можете столкнуться при использовании унитаза.

If the problem persists after attempting these solutions, it is recommended to contact a qualified plumber or Cersanit customer support.

8. Технические характеристики

Note: The provided dimensions and weight (24 x 69 x 2.5 cm; 250 grams) appear to be for a small component or packaging, not the entire toilet unit. Please refer to the product packaging or Cersanit's official website for precise full product specifications.

9. Гарантия и поддержка

Cersanit products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Cersanit webсайт.

For technical assistance, spare parts, or further inquiries, please contact Cersanit customer support through their official channels. When contacting support, please have your product model number (Mito Compact 349 mi010) and purchase date available.

Official Cersanit Webсайт: www.cersanit.com