Keeley Bubble Tron Dynamic Flanger Phaser Instruction Manual

1. Продукт закончилсяview

The Keeley Bubble Tron Dynamic Flanger Phaser and Random Synth Filter is a versatile effects pedal designed to produce unique modulation sounds. Inspired by classic dynamic flangers and phasers, this pedal offers three distinct modes of operation: Dynamic Flange, Dynamic Phase, and Random Filter. It allows for expressive control over your guitar's signal, reacting to your pick attack and playing dynamics to create a range of sonic textures.

Figure 1: Keeley Bubble Tron Dynamic Flanger Phaser Pedal.

The pedal features a simple yet powerful control layout, allowing users to dial in subtle or extreme effects. Its dynamic response makes it an intuitive tool for guitarists seeking to add expressive modulation to their sound.

2. Настройка

To set up your Keeley Bubble Tron pedal, follow these steps:

1. Подключение питания: Connect a standard 9V DC power supply (center negative, 65mA+ current draw) to the 9V jack on the pedal. Ensure the power supply meets these specifications to prevent damage.
2. Входное соединение: Подключите гитару или другой инструмент к разъему «INPUT» на правой стороне педали с помощью стандартного инструментального кабеля диаметром 1/4 дюйма.
3. Выходное соединение: Подключите разъем "OUTPUT" на левой стороне педали к вашему ampусилитель или следующую педаль в вашей сигнальной цепи, используя стандартный инструментальный кабель 1/4 дюйма.
4. Начальные настройки: Before engaging the pedal, set all knobs to their 12 o'clock position and ensure the mode switch is in the middle (Phase) position for a neutral starting point.

3. Инструкция по эксплуатации

The Keeley Bubble Tron offers a variety of controls to shape your sound. Familiarize yourself with each knob and switch:

Управление:

• RATE (FDBK):
  • In Filter & Phase modes: Controls the rate of the LFO.
  • In Flange mode: Controls feedback. Turning left provides maximum negative feedback; turning right provides maximum positive feedback.
• SENS (чувствительность):
  • In Filter mode: Controls envelope sensitivity, acting like a synth filter.
  • In Phase & Flange modes: Controls input sensitivity, determining the point at which dynamic control is triggered. Start with this knob at full left and adjust for desired responsiveness.
• DEPTH (Shape):
  • In Filter mode: Selects LFO shape (from full left: ramp вверх, гamp down, random, or triangle).
  • In Phase & Flange modes: Sets the depth of the effect for mild or lush sounds.
• УРОВЕНЬ: Управляет общим выходным уровнем эффекта.
• НОЖНОЙ ПЕРЕКЛЮЧАТЕЛЬ: Включает и выключает эффект.

Mode Select Switch:

• UP: Activates Filter mode.
• СЕРЕДИНА: Activates Phase mode.
• ВНИЗ: Activates Flange mode.

Figure 2: Bank A (Default Mode) Control Layout. This mode is active when the internal switch is set to Bank A.

Internal Mini Toggles (Bank Selection):

The Bubble Tron features internal mini toggles to expand its sonic capabilities. To access these, you will need to remove the back plate of the pedal.

• ANALOG FILTER (Vintage/Modern):
  • Винtagе Режим: Rolls off some high frequencies for a warmer tone.
  • Современный режим: Provides full-range clarity (default setting).
• BANK TOGGLE (Bank 1/Bank 2):
  • Bank 1 (Default): Offers Sample & Hold Filter, Dynamic Phaser, and Dynamic Flanger modes.
  • Банк 2: Offers Envelope Filter, Standard 8-Stage Phaser, and Standard Classic Flanger modes.

Figure 3: Bank B Control Layout. Access this mode by switching the internal Bank Toggle from Bank A to Bank B.

Figure 4: Internal Mini Toggles for Analog Filter and Bank Selection.

Figure 5: External Toggle Switch modes for Bank 1 and Bank 2.

4. Техническое обслуживание

To ensure the longevity and optimal performance of your Keeley Bubble Tron, observe the following maintenance guidelines:

• Уборка: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, as these can damage the finish.
• Хранилище: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power supply.
• Источник питания: Always use a regulated 9V DC power supply with a center-negative polarity and sufficient current (65mA+). Incorrect power supplies can cause damage and void the warranty.
• Соединения: Убедитесь, что все кабели надежно подключены. Избегайте чрезмерного усилия при подключении или отключении кабелей.

5. Поиск Неисправностей

If you encounter issues with your Keeley Bubble Tron, try these troubleshooting steps:

• Нет звука:
  • Проверьте все кабельные соединения (входные, выходные, питание).
  • Verify the power supply is correctly connected and providing the specified 9V DC.
  • Убедитесь, что ваш прибор и ampлиферы работают корректно.
  • Bypass the pedal to confirm the issue is with the pedal itself.
• Нежелательный шум/гул:
  • Используйте высококачественный изолированный источник питания.
  • Проверьте кабели на наличие неисправностей.
  • Обеспечьте надлежащее заземление вашего устройства. ampподъемник и другое оборудование.
• Effect Not Engaging/Responding:
  • Check the footswitch functionality.
  • Adjust the SENS (Sensitivity) knob, especially in dynamic modes, to ensure it's set appropriately for your playing style and instrument output.
  • Verify the MODE SELECT switch is in the desired position.

6. Технические характеристики

7. Гарантия и поддержка

For warranty information and technical support, please refer to the official Keeley Electronics webили обратитесь в службу поддержки напрямую. Сохраните чек на случай предъявления гарантийных претензий.

Официально Webсайт: Keeley Electronics Store