Eurolite THA-250F LED Theater Spot

1. Введение

This manual provides essential information for the safe and efficient operation of your Eurolite THA-250F LED Theater Spot. Please read this manual thoroughly before initial operation to ensure proper use and to prevent damage to the device or injury to yourself. Keep this manual for future reference.

The Eurolite THA-250F is a powerful 250W COB LED lighting fixture designed for indoor use, offering versatile dimming and focusing capabilities suitable for various theatrical and event lighting applications.

2. Инструкции по технике безопасности

ВНИМАНИЕ: Несоблюдение данных инструкций по технике безопасности может привести к пожару, поражению электрическим током или другим травмам и повреждениям.

• Это устройство предназначено для только для использования в помещении. Do not expose it to rain or moisture.
• Убедитесь, что источник питания vol.tage matches the rating on the device.
• Всегда подключайте устройство к заземленной розетке.
• Не открывайте корпус. Внутри нет деталей, подлежащих обслуживанию пользователем. По всем вопросам обслуживания обращайтесь к квалифицированному персоналу.
• Avoid direct eye exposure to the light source. The LED light is very bright.
• Обеспечьте достаточную вентиляцию вокруг устройства. Не закрывайте вентиляционные отверстия.
• Mount the device securely using appropriate clampи страховочные тросы.
• Disconnect from mains power before cleaning or servicing.
• Держите легковоспламеняющиеся материалы вдали от устройства.

3. Продукт закончилсяview

Familiarize yourself with the components of your Eurolite THA-250F LED Theater Spot.

Рисунок 3.1: Лицевая сторона view of the Eurolite THA-250F LED Theater Spot, showing the lens and mounting bracket.

Рисунок 3.2: Сторона view of the unit, displaying the 'Eurolite LED THA-250F COB' branding.

Figure 3.3: Rear panel showing DMX IN/OUT, Power IN/OUT, and Fuse connections.

Figure 3.4: The included barndoors accessory, used to shape the light beam.

4. Настройка

4.1 Монтаж

The THA-250F is equipped with a robust mounting bracket for secure installation. Ensure the mounting surface or truss system can support the weight of the fixture (approximately 9.35 kg) and any additional accessories. Use appropriate clamps and always attach a safety cable to prevent accidental drops.

4.2 Подключение питания

Подсоедините прилагаемый кабель питания к ПИТАНИЕ В socket on the rear panel (refer to Figure 3.3). Plug the other end into a suitable grounded power outlet. The unit supports power linking via the ВЫХОД ПИТАНИЯ socket for convenience, allowing multiple units to be powered from a single source (ensure total current draw does not exceed circuit limits).

4.3 DMX-соединение

For DMX control, connect a DMX cable from your DMX controller's output to the DMX-вход socket on the THA-250F (refer to Figure 3.3). To daisy-chain multiple units, connect a DMX cable from the DMX ВЫХОД socket of the first unit to the DMX-вход socket of the next unit. Always terminate the last unit in a DMX chain with a 120 Ohm DMX terminator.

5. Инструкция по эксплуатации

5.1 Панель управления

The control panel, located on the side of the unit, allows for configuration and manual control. It features a display screen, four buttons, and two rotary knobs.

Рисунок 5.1: Подробная информация view of the control panel, showing MODE, ENTER, UP, DOWN buttons, and DIMMING, FOCUS knobs.

• РЕЖИМ: Циклически перемещается по опциям главного меню.
• ВОЙТИ: Подтверждает выбор или входит в подменю.
• ВВЕРХ ВНИЗ: Осуществляет навигацию по пунктам меню или регулирует значения параметров.
• DIMMING Knob: Manually adjusts the light intensity.
• Ручка FOCUS: Manually adjusts the beam focus.

Figure 5.2: The display screen indicating the current DMX address (ADDR:032) and channel mode (CH:03).

Режимы работы 5.2

The THA-250F can operate in several modes:

• Режим DMX: Allows external control via a DMX controller. Set the DMX address and channel mode using the control panel.
• Ручной режим: Control dimming and focus directly using the knobs on the control panel.
• Other modes (e.g., Standalone, Master/Slave) may be available. Refer to the on-screen menu for detailed options.

5.3 Основные операции

After powering on the unit, the display will show the current operating mode or DMX address. Use the MODE and ENTER buttons to navigate the menu. Use UP/DOWN to change values. The DIMMING and FOCUS knobs provide immediate manual control over light output and beam sharpness.

Figure 5.3: Two Eurolite THA-250F units in an operational setting, demonstrating their light output capabilities.

6. Техническое обслуживание

6.1 Очистка

Regular cleaning helps maintain optimal performance and extends the lifespan of your device. Disconnect the unit from power before cleaning.

• Для протирки внешней поверхности устройства используйте мягкую безворсовую ткань.
• For the lens, use a specialized lens cleaning solution and a microfiber cloth to avoid scratches.
• Periodically clean the ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.

6.2 Хранение

When not in use, store the device in a dry, dust-free environment, away from extreme temperatures and humidity. If transporting, use appropriate protective cases.

7. Поиск Неисправностей

If you encounter issues with your Eurolite THA-250F, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Eurolite customer support or a qualified technician.

8. Технические характеристики

9. Гарантия и поддержка

This product is manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, spare parts, or service inquiries, please contact Eurolite customer service directly or visit their official webсайт.

Производитель: Евролит