IK Multimedia iRig Mic Lav Lapel Microphone Instruction Manual

Введение

The IK Multimedia iRig Mic Lav is a compact, omnidirectional condenser lavalier microphone designed for mobile devices. It provides convenient, crisp, high-quality audio directly to your smartphone or tablet. This microphone is compatible with both iOS and Android devices (an adapter may be required for select Android devices) and features a 1/8" TRRS jack for connection. Its unique design allows for headphone monitoring and daisy-chaining of a second iRig Mic Lav for dual microphone setups.

Основные характеристики

• Professional mobile lavalier microphone for all devices.
• High-quality omnidirectional condenser capsule.
• Includes foam pop shield and durable mounting clip.
• 1/8" TRRS jack connects to iPhone, iPad, iPod touch, Android (adapter required for select devices).
• Combo 1/8" TRRS port can be used for headphone monitoring/line out to a powered speaker.

Что в коробке?

• iRig Mic Lav Microphone
• Поролоновый поп-фильтр
• Durable Mounting Clip
• Защитный чехол для переноски

Настраивать

1. Подключите микрофон: Plug the 1/8" TRRS jack of the iRig Mic Lav directly into the headphone/microphone jack of your smartphone, tablet, or compatible device. For devices without a 3.5mm jack, an appropriate adapter (e.g., Lightning to 3.5mm for newer iPhones, USB-C to 3.5mm for some Android devices) will be required.
2. Надежно закрепите микрофон: Attach the durable mounting clip to the microphone and then clip the microphone to your clothing, ideally about 6-8 inches from your mouth, for optimal sound capture.
3. Attach Pop Filter (Optional): For outdoor use or to reduce plosive sounds (like 'p' and 'b' sounds), gently place the included foam pop filter over the microphone capsule.
4. Headphone Monitoring (Optional): To monitor your audio in real-time, connect headphones to the 1/8" TRRS port on the in-line connector of the iRig Mic Lav. Note that real-time monitoring requires a compatible recording application with pass-through monitoring enabled. The microphone's in-line connector does not provide direct hardware monitoring.
5. Последовательное подключение (опционально): To connect a second iRig Mic Lav, plug its 1/8" TRRS jack into the 1/8" TRRS port on the in-line connector of the first iRig Mic Lav. This allows for a dual microphone setup.

Операция

The iRig Mic Lav is designed for simple plug-and-play operation. Once connected to your device, it acts as an audio input. The omnidirectional condenser capsule captures sound from all directions, making it suitable for interviews, presentations, and general recording.

• Запись: Open your preferred audio or video recording application on your device. The iRig Mic Lav will be automatically recognized as the audio input source. Begin recording as usual within the app.
• Мониторинг: If you have headphones connected to the in-line TRRS port, ensure your recording application has a real-time monitoring feature enabled to hear your audio as it's being captured.
• Регулировка уровней: Audio levels are typically managed within your recording application. Refer to your app's instructions for adjusting input gain and other audio settings.

Официальные видеоролики о продуктах

Обслуживание

• Уборка: Use a soft, dry cloth to clean the microphone and cables. Avoid using liquid cleaners or solvents.
• Уход за поп-фильтром: The foam pop filter can be gently cleaned with mild soap and water if it becomes dirty. Ensure it is completely dry before reattaching it to the microphone.
• Хранилище: When not in use, store the iRig Mic Lav in its protective carrying case to prevent damage and keep it free from dust.

Поиск неисправностей

• Нет аудиовхода: Ensure the 1/8" TRRS jack is fully inserted into your device's port. If using an adapter, ensure the adapter is also fully connected and compatible. Check your device's audio input settings to confirm the iRig Mic Lav is selected.
• Poor Audio Quality/Muffled Sound: Verify the microphone is positioned correctly (6-8 inches from the sound source). Ensure the foam pop filter is clean and properly attached. Check your recording app's settings for any filters or processing that might be affecting the sound.
• No Real-time Monitoring: Real-time monitoring through the headphone jack requires a compatible recording application with a pass-through monitoring feature enabled. The iRig Mic Lav's in-line connector does not provide direct hardware monitoring. Consult your recording app's documentation for instructions on enabling this feature.
• Daisy-Chain Issues: When daisy-chaining, ensure both iRig Mic Lav units are properly connected. Check the audio levels for each microphone within your recording application, if supported.

Технические характеристики

Гарантия и поддержка

For warranty information and technical support, please refer to the official IK Multimedia webили обратитесь в службу поддержки напрямую. Сохраните чек на случай предъявления гарантийных претензий.